The Colibri standard defines four pins as PWM outputs, two of them (PWM A and C) are routed to FTM instance 0 and the other two (PWM B and D) are routed to FTM instance 1. Hence enable both FTM instances for the Colibri module and mux the four pins accordingly.
Signed-off-by: Bhuvanchandra DV <[email protected]> --- arch/arm/boot/dts/vf610-colibri-eval-v3.dts | 8 ++++++++ arch/arm/boot/dts/vf610-colibri.dtsi | 25 +++++++++++++++++++++++++ 2 files changed, 33 insertions(+) diff --git a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts index 7fb3066..ba98039 100644 --- a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts @@ -44,3 +44,11 @@ &uart2 { status = "okay"; }; + +&pwm0 { + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/vf610-colibri.dtsi b/arch/arm/boot/dts/vf610-colibri.dtsi index 0cd8343..9bd1415 100644 --- a/arch/arm/boot/dts/vf610-colibri.dtsi +++ b/arch/arm/boot/dts/vf610-colibri.dtsi @@ -69,6 +69,16 @@ status = "okay"; }; +&pwm0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0>; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; +}; + &iomuxc { vf610-colibri { pinctrl_esdhc1: esdhc1grp { @@ -119,5 +129,20 @@ VF610_PAD_PTD3__UART2_CTS 0x21a1 >; }; + + pinctrl_pwm0: pwm0grp { + fsl,pins = < + VF610_PAD_PTB0__FTM0_CH0 0x1182 + VF610_PAD_PTB1__FTM0_CH1 0x1182 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + VF610_PAD_PTB8__FTM1_CH0 0x1182 + VF610_PAD_PTB9__FTM1_CH1 0x1182 + >; + }; + }; }; -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
