From: Corey Minyard <[email protected]> This will allow kdump dumps and kgdb to work correctly with MIPS.
Signed-off-by: Corey Minyard <[email protected]> --- arch/mips/Makefile | 14 ++- arch/mips/include/asm/asm.h | 13 +- arch/mips/include/asm/dwarf2.h | 6 + arch/mips/include/asm/stackframe.h | 245 +++++++++++++++++++++---------------- arch/mips/kernel/entry.S | 2 +- arch/mips/kernel/genex.S | 21 ++-- arch/mips/mm/tlbex-fault.S | 7 +- 7 files changed, 187 insertions(+), 121 deletions(-) create mode 100644 arch/mips/include/asm/dwarf2.h diff --git a/arch/mips/Makefile b/arch/mips/Makefile index bbac51e1..6a76ee6 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -238,11 +238,23 @@ ifdef CONFIG_64BIT endif endif -KBUILD_AFLAGS += $(cflags-y) + +# do binutils support CFI? +cfireg := $$$$0 +cfi := $(call as-instr,.cfi_startproc\n.cfi_rel_offset $(cfireg)$(comma)0\n.cfi_endproc,-DCONFIG_AS_CFI=1) +# is .cfi_signal_frame supported too? +cfi-sigframe := $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1) +cfi-sections := $(call as-instr,.cfi_sections .debug_frame,-DCONFIG_AS_CFI_SECTIONS=1) + +KBUILD_AFLAGS += $(cfi) $(cfi-sigframe) $(cfi-sections) $(cflags-y) KBUILD_CFLAGS += $(cflags-y) KBUILD_CPPFLAGS += -DVMLINUX_LOAD_ADDRESS=$(load-y) KBUILD_CPPFLAGS += -DDATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0) +# This is required to get dwarf unwinding tables into .debug_frame +# instead of .eh_frame so we don't discard them. +KBUILD_CFLAGS += -fno-asynchronous-unwind-tables + bootvars-y = VMLINUX_LOAD_ADDRESS=$(load-y) \ VMLINUX_ENTRY_ADDRESS=$(entry-y) diff --git a/arch/mips/include/asm/asm.h b/arch/mips/include/asm/asm.h index 7c26b28..8eb79862 100644 --- a/arch/mips/include/asm/asm.h +++ b/arch/mips/include/asm/asm.h @@ -19,6 +19,9 @@ #include <asm/sgidefs.h> #include <asm/asm-eva.h> +#ifdef __ASSEMBLY__ +#include <asm/dwarf2.h> +#endif #ifndef CAT #ifdef __STDC__ @@ -54,7 +57,9 @@ .align 2; \ .type symbol, @function; \ .ent symbol, 0; \ -symbol: .frame sp, 0, ra +symbol: .frame sp, 0, ra; \ + CFI_STARTPROC + /* * NESTED - declare nested routine entry point @@ -63,13 +68,15 @@ symbol: .frame sp, 0, ra .globl symbol; \ .align 2; \ .type symbol, @function; \ - .ent symbol, 0; \ -symbol: .frame sp, framesize, rpc + .ent symbol, 0; \ +symbol: .frame sp, framesize, rpc; \ + CFI_STARTPROC /* * END - mark end of function */ #define END(function) \ + CFI_ENDPROC; \ .end function; \ .size function, .-function diff --git a/arch/mips/include/asm/dwarf2.h b/arch/mips/include/asm/dwarf2.h new file mode 100644 index 0000000..1728acd --- /dev/null +++ b/arch/mips/include/asm/dwarf2.h @@ -0,0 +1,6 @@ +#ifndef _ASM_MIPS_DWARF2_H +#define _ASM_MIPS_DWARF2_H + +#include <asm-generic/dwarf2.h> + +#endif /* _ASM_MIPS_DWARF2_H */ diff --git a/arch/mips/include/asm/stackframe.h b/arch/mips/include/asm/stackframe.h index b188c79..0976f03 100644 --- a/arch/mips/include/asm/stackframe.h +++ b/arch/mips/include/asm/stackframe.h @@ -18,6 +18,30 @@ #include <asm/mipsregs.h> #include <asm/asm-offsets.h> #include <asm/thread_info.h> +#include <asm/dwarf2.h> + +/* Make the addition of cfi info a little easier. */ + .macro cfi_rel_offset reg offset=0 docfi=0 + .if \docfi + CFI_REL_OFFSET \reg, \offset + .endif + .endm + + .macro cfi_st reg offset=0 docfi=0 + LONG_S \reg, \offset(sp) + cfi_rel_offset \reg, \offset, \docfi + .endm + + .macro cfi_restore reg offset=0 docfi=0 + .if \docfi + CFI_RESTORE \reg + .endif + .endm + + .macro cfi_ld reg offset=0 docfi=0 + LONG_L \reg, \offset(sp) + cfi_restore \reg \offset \docfi + .endm #if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) #define STATMASK 0x3f @@ -25,14 +49,14 @@ #define STATMASK 0x1f #endif - .macro SAVE_AT + .macro SAVE_AT docfi=0 .set push .set noat - LONG_S $1, PT_R1(sp) + cfi_st $1, PT_R1, \docfi .set pop .endm - .macro SAVE_TEMP + .macro SAVE_TEMP docfi=0 #ifdef CONFIG_CPU_HAS_SMARTMIPS mflhxu v1 LONG_S v1, PT_LO(sp) @@ -44,20 +68,20 @@ mfhi v1 #endif #ifdef CONFIG_32BIT - LONG_S $8, PT_R8(sp) - LONG_S $9, PT_R9(sp) + cfi_st $8, PT_R8, \docfi + cfi_st $9, PT_R9, \docfi #endif - LONG_S $10, PT_R10(sp) - LONG_S $11, PT_R11(sp) - LONG_S $12, PT_R12(sp) + cfi_st $10, PT_R10, \docfi + cfi_st $11, PT_R11, \docfi + cfi_st $12, PT_R12, \docfi #ifndef CONFIG_CPU_HAS_SMARTMIPS LONG_S v1, PT_HI(sp) mflo v1 #endif - LONG_S $13, PT_R13(sp) - LONG_S $14, PT_R14(sp) - LONG_S $15, PT_R15(sp) - LONG_S $24, PT_R24(sp) + cfi_st $13, PT_R13, \docfi + cfi_st $14, PT_R14, \docfi + cfi_st $15, PT_R15, \docfi + cfi_st $24, PT_R24, \docfi #ifndef CONFIG_CPU_HAS_SMARTMIPS LONG_S v1, PT_LO(sp) #endif @@ -71,16 +95,16 @@ #endif .endm - .macro SAVE_STATIC - LONG_S $16, PT_R16(sp) - LONG_S $17, PT_R17(sp) - LONG_S $18, PT_R18(sp) - LONG_S $19, PT_R19(sp) - LONG_S $20, PT_R20(sp) - LONG_S $21, PT_R21(sp) - LONG_S $22, PT_R22(sp) - LONG_S $23, PT_R23(sp) - LONG_S $30, PT_R30(sp) + .macro SAVE_STATIC docfi=0 + cfi_st $16, PT_R16, \docfi + cfi_st $17, PT_R17, \docfi + cfi_st $18, PT_R18, \docfi + cfi_st $19, PT_R19, \docfi + cfi_st $20, PT_R20, \docfi + cfi_st $21, PT_R21, \docfi + cfi_st $22, PT_R22, \docfi + cfi_st $23, PT_R23, \docfi + cfi_st $30, PT_R30, \docfi .endm #ifdef CONFIG_SMP @@ -143,7 +167,7 @@ .endm #endif - .macro SAVE_SOME + .macro SAVE_SOME docfi=0 .set push .set noat .set reorder @@ -157,16 +181,26 @@ get_saved_sp #ifndef CONFIG_CPU_DADDI_WORKAROUNDS 8: move k0, sp + .if \docfi + CFI_REGISTER sp, k0 + .endif PTR_SUBU sp, k1, PT_SIZE #else .set at=k0 8: PTR_SUBU k1, PT_SIZE .set noat move k0, sp + .if \docfi + CFI_REGISTER sp, k0 + .endif move sp, k1 #endif - LONG_S k0, PT_R29(sp) - LONG_S $3, PT_R3(sp) + .if \docfi + CFI_DEF_CFA sp,0 + .endif + cfi_st k0, PT_R29, \docfi + cfi_rel_offset sp, PT_R29, \docfi + cfi_st v1, PT_R3, \docfi /* * You might think that you don't need to save $0, * but the FPU emulator and gdb remote debug stub @@ -174,23 +208,26 @@ */ LONG_S $0, PT_R0(sp) mfc0 v1, CP0_STATUS - LONG_S $2, PT_R2(sp) + cfi_st v0, PT_R2, \docfi LONG_S v1, PT_STATUS(sp) - LONG_S $4, PT_R4(sp) + cfi_st $4, PT_R4, \docfi mfc0 v1, CP0_CAUSE - LONG_S $5, PT_R5(sp) + cfi_st $5, PT_R5, \docfi LONG_S v1, PT_CAUSE(sp) - LONG_S $6, PT_R6(sp) + cfi_st $6, PT_R6, \docfi MFC0 v1, CP0_EPC - LONG_S $7, PT_R7(sp) + cfi_st $7, PT_R7, \docfi #ifdef CONFIG_64BIT - LONG_S $8, PT_R8(sp) - LONG_S $9, PT_R9(sp) + cfi_st $8, PT_R8, \docfi + cfi_st $9, PT_R9, \docfi #endif LONG_S v1, PT_EPC(sp) - LONG_S $25, PT_R25(sp) - LONG_S $28, PT_R28(sp) - LONG_S $31, PT_R31(sp) + .if \docfi + CFI_REL_OFFSET ra, PT_EPC + .endif + cfi_st $25, PT_R25, \docfi + cfi_st $28, PT_R28, \docfi + cfi_st $31, PT_R31, \docfi ori $28, sp, _THREAD_MASK xori $28, _THREAD_MASK #ifdef CONFIG_CPU_CAVIUM_OCTEON @@ -200,21 +237,21 @@ .set pop .endm - .macro SAVE_ALL - SAVE_SOME - SAVE_AT - SAVE_TEMP - SAVE_STATIC + .macro SAVE_ALL docfi=0 + SAVE_SOME \docfi + SAVE_AT \docfi + SAVE_TEMP \docfi + SAVE_STATIC \docfi .endm - .macro RESTORE_AT + .macro RESTORE_AT docfi=0 .set push .set noat - LONG_L $1, PT_R1(sp) + cfi_ld $1, PT_R1, \docfi .set pop .endm - .macro RESTORE_TEMP + .macro RESTORE_TEMP docfi=0 #ifdef CONFIG_CPU_CAVIUM_OCTEON /* Restore the Octeon multiplier state */ jal octeon_mult_restore @@ -233,33 +270,33 @@ mthi $24 #endif #ifdef CONFIG_32BIT - LONG_L $8, PT_R8(sp) - LONG_L $9, PT_R9(sp) + cfi_ld $8, PT_R8, \docfi + cfi_ld $9, PT_R9, \docfi #endif - LONG_L $10, PT_R10(sp) - LONG_L $11, PT_R11(sp) - LONG_L $12, PT_R12(sp) - LONG_L $13, PT_R13(sp) - LONG_L $14, PT_R14(sp) - LONG_L $15, PT_R15(sp) - LONG_L $24, PT_R24(sp) + cfi_ld $10, PT_R10, \docfi + cfi_ld $11, PT_R11, \docfi + cfi_ld $12, PT_R12, \docfi + cfi_ld $13, PT_R13, \docfi + cfi_ld $14, PT_R14, \docfi + cfi_ld $15, PT_R15, \docfi + cfi_ld $24, PT_R24, \docfi .endm - .macro RESTORE_STATIC - LONG_L $16, PT_R16(sp) - LONG_L $17, PT_R17(sp) - LONG_L $18, PT_R18(sp) - LONG_L $19, PT_R19(sp) - LONG_L $20, PT_R20(sp) - LONG_L $21, PT_R21(sp) - LONG_L $22, PT_R22(sp) - LONG_L $23, PT_R23(sp) - LONG_L $30, PT_R30(sp) + .macro RESTORE_STATIC docfi=0 + cfi_ld $16, PT_R16, \docfi + cfi_ld $17, PT_R17, \docfi + cfi_ld $18, PT_R18, \docfi + cfi_ld $19, PT_R19, \docfi + cfi_ld $20, PT_R20, \docfi + cfi_ld $21, PT_R21, \docfi + cfi_ld $22, PT_R22, \docfi + cfi_ld $23, PT_R23, \docfi + cfi_ld $30, PT_R30, \docfi .endm #if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) - .macro RESTORE_SOME + .macro RESTORE_SOME docfi=0 .set push .set reorder .set noat @@ -274,30 +311,30 @@ and v0, v1 or v0, a0 mtc0 v0, CP0_STATUS - LONG_L $31, PT_R31(sp) - LONG_L $28, PT_R28(sp) - LONG_L $25, PT_R25(sp) - LONG_L $7, PT_R7(sp) - LONG_L $6, PT_R6(sp) - LONG_L $5, PT_R5(sp) - LONG_L $4, PT_R4(sp) - LONG_L $3, PT_R3(sp) - LONG_L $2, PT_R2(sp) + cfi_ld $31, PT_R31, \docfi + cfi_ld $28, PT_R28, \docfi + cfi_ld $25, PT_R25, \docfi + cfi_ld $7, PT_R7, \docfi + cfi_ld $6, PT_R6, \docfi + cfi_ld $5, PT_R5, \docfi + cfi_ld $4, PT_R4, \docfi + cfi_ld $3, PT_R3, \docfi + cfi_ld $2, PT_R2, \docfi .set pop .endm - .macro RESTORE_SP_AND_RET + .macro RESTORE_SP_AND_RET docfi=0 .set push .set noreorder LONG_L k0, PT_EPC(sp) - LONG_L sp, PT_R29(sp) + cfi_ld sp, PT_R29, \docfi jr k0 rfe .set pop .endm #else - .macro RESTORE_SOME + .macro RESTORE_SOME docfi=0 .set push .set reorder .set noat @@ -314,24 +351,28 @@ mtc0 v0, CP0_STATUS LONG_L v1, PT_EPC(sp) MTC0 v1, CP0_EPC - LONG_L $31, PT_R31(sp) - LONG_L $28, PT_R28(sp) - LONG_L $25, PT_R25(sp) + cfi_ld $31, PT_R31, \docfi + cfi_ld $28, PT_R28, \docfi + cfi_ld $25, PT_R25, \docfi #ifdef CONFIG_64BIT - LONG_L $8, PT_R8(sp) - LONG_L $9, PT_R9(sp) + cfi_ld $8, PT_R8, \docfi + cfi_ld $9, PT_R9, \docfi #endif - LONG_L $7, PT_R7(sp) - LONG_L $6, PT_R6(sp) - LONG_L $5, PT_R5(sp) - LONG_L $4, PT_R4(sp) - LONG_L $3, PT_R3(sp) - LONG_L $2, PT_R2(sp) + cfi_ld $7, PT_R7, \docfi + cfi_ld $6, PT_R6, \docfi + cfi_ld $5, PT_R5, \docfi + cfi_ld $4, PT_R4, \docfi + cfi_ld $3, PT_R3, \docfi + cfi_ld $2, PT_R2, \docfi .set pop .endm - .macro RESTORE_SP_AND_RET - LONG_L sp, PT_R29(sp) + .macro RESTORE_SP docfi=0 + cfi_ld sp, PT_R29, \docfi + .endm + + .macro RESTORE_SP_AND_RET docfi=0 + RESTORE_SP \docfi .set arch=r4000 eret .set mips0 @@ -339,24 +380,20 @@ #endif - .macro RESTORE_SP - LONG_L sp, PT_R29(sp) - .endm - - .macro RESTORE_ALL - RESTORE_TEMP - RESTORE_STATIC - RESTORE_AT - RESTORE_SOME - RESTORE_SP + .macro RESTORE_ALL docfi=0 + RESTORE_TEMP \docfi + RESTORE_STATIC \docfi + RESTORE_AT \docfi + RESTORE_SOME \docfi + RESTORE_SP \docfi .endm - .macro RESTORE_ALL_AND_RET - RESTORE_TEMP - RESTORE_STATIC - RESTORE_AT - RESTORE_SOME - RESTORE_SP_AND_RET + .macro RESTORE_ALL_AND_RET docfi=0 + RESTORE_TEMP \docfi + RESTORE_STATIC \docfi + RESTORE_AT \docfi + RESTORE_SOME \docfi + RESTORE_SP_AND_RET \docfi .endm /* diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S index 4353d32..6eb3b28 100644 --- a/arch/mips/kernel/entry.S +++ b/arch/mips/kernel/entry.S @@ -144,7 +144,7 @@ FEXPORT(syscall_exit_partial) li t0, _TIF_ALLWORK_MASK and t0, a2 beqz t0, restore_partial - SAVE_STATIC + SAVE_STATIC docfi=0 syscall_exit_work: LONG_L t0, PT_STATUS(sp) # returning to kernel mode? andi t0, t0, KU_USER diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S index ac35e12..68c8d34 100644 --- a/arch/mips/kernel/genex.S +++ b/arch/mips/kernel/genex.S @@ -151,6 +151,7 @@ LEAF(__r4k_wait) .align 5 BUILD_ROLLBACK_PROLOGUE handle_int NESTED(handle_int, PT_SIZE, sp) + CFI_SIGNAL_FRAME #ifdef CONFIG_TRACE_IRQFLAGS /* * Check to see if the interrupted code has just disabled @@ -182,18 +183,18 @@ NESTED(handle_int, PT_SIZE, sp) 1: .set pop #endif - SAVE_ALL + SAVE_ALL docfi=1 CLI TRACE_IRQS_OFF LONG_L s0, TI_REGS($28) LONG_S sp, TI_REGS($28) - PTR_LA ra, ret_from_irq PTR_LA v0, plat_irq_dispatch - jr v0 + jal v0 #ifdef CONFIG_CPU_MICROMIPS nop #endif + j ret_from_irq END(handle_int) __INIT @@ -233,8 +234,8 @@ NESTED(except_vec_ejtag_debug, 0, sp) */ BUILD_ROLLBACK_PROLOGUE except_vec_vi NESTED(except_vec_vi, 0, sp) - SAVE_SOME - SAVE_AT + SAVE_SOME docfi=1 + SAVE_AT docfi=1 .set push .set noreorder PTR_LA v1, except_vec_vi_handler @@ -263,8 +264,8 @@ NESTED(except_vec_vi_handler, 0, sp) LONG_L s0, TI_REGS($28) LONG_S sp, TI_REGS($28) - PTR_LA ra, ret_from_irq - jr v0 + jal v0 + j ret_from_irq END(except_vec_vi_handler) /* @@ -322,6 +323,7 @@ NESTED(except_vec_nmi, 0, sp) __FINIT NESTED(nmi_handler, PT_SIZE, sp) + CFI_SIGNAL_FRAME .set push .set noat /* @@ -400,6 +402,7 @@ NESTED(nmi_handler, PT_SIZE, sp) .macro __BUILD_HANDLER exception handler clear verbose ext .align 5 NESTED(handle_\exception, PT_SIZE, sp) + CFI_SIGNAL_FRAME .set noat SAVE_ALL FEXPORT(handle_\exception\ext) @@ -407,8 +410,8 @@ NESTED(nmi_handler, PT_SIZE, sp) .set at __BUILD_\verbose \exception move a0, sp - PTR_LA ra, ret_from_exception - j do_\handler + jal do_\handler + j ret_from_exception END(handle_\exception) .endm diff --git a/arch/mips/mm/tlbex-fault.S b/arch/mips/mm/tlbex-fault.S index 318855e..c91cde8 100644 --- a/arch/mips/mm/tlbex-fault.S +++ b/arch/mips/mm/tlbex-fault.S @@ -12,14 +12,15 @@ .macro tlb_do_page_fault, write NESTED(tlb_do_page_fault_\write, PT_SIZE, sp) - SAVE_ALL + CFI_SIGNAL_FRAME + SAVE_ALL docfi=1 MFC0 a2, CP0_BADVADDR KMODE move a0, sp REG_S a2, PT_BVADDR(sp) li a1, \write - PTR_LA ra, ret_from_exception - j do_page_fault + jal do_page_fault + j ret_from_exception END(tlb_do_page_fault_\write) .endm -- 1.8.3.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
