All interrupts coming from MUIC were ignored because interrupt source
register was masked.

The Maxim 77693 has a "interrupt source" - a separate register and interrupts
which give information about PMIC block triggering the individual
interrupt (charger, topsys, MUIC, flash LED).

By default bootloader could initialize this register to "mask all"
value. In such case (observed on Trats2 board) MUIC interrupts won't be
generated regardless of their mask status. Regmap irq chip was unmasking
individual MUIC interrupts but the source was masked

Before introducing regmap irq chip this interrupt source was unmasked,
read and acked. Reading and acking is not necessary but unmasking is. Do
it in extcon driver.

Signed-off-by: Krzysztof Kozlowski <k.kozlow...@samsung.com>
Cc: <sta...@vger.kernel.org>
Fixes: 342d669c1ee4 ("mfd: max77693: Handle IRQs using regmap")
---
 drivers/extcon/extcon-max77693.c     | 16 ++++++++++++++++
 include/linux/mfd/max77693-private.h |  5 +++++
 2 files changed, 21 insertions(+)

diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c
index 490e27475bac..d3adacf3187f 100644
--- a/drivers/extcon/extcon-max77693.c
+++ b/drivers/extcon/extcon-max77693.c
@@ -1176,6 +1176,22 @@ static int max77693_muic_probe(struct platform_device 
*pdev)
                }
        }
 
+       if (i) {
+               /*
+                * i>0, at least one MUIC interrupt requested so need to unmask
+                * MUIC interrupt in INTSRC register. Without that MUIC
+                * interrupts will not be reported.
+                */
+               ret = regmap_update_bits(max77693->regmap,
+                               MAX77693_PMIC_REG_INTSRC_MASK, SRC_IRQ_MUIC,
+                               ~SRC_IRQ_MUIC);
+               if (ret < 0) {
+                       dev_err(&pdev->dev, "Could not unmask MUIC interrupt in 
INTSRC: %d\n",
+                                       ret);
+                       return ret;
+               }
+       }
+
        /* Initialize extcon device */
        info->edev = devm_extcon_dev_allocate(&pdev->dev,
                                              max77693_extcon_cable);
diff --git a/include/linux/mfd/max77693-private.h 
b/include/linux/mfd/max77693-private.h
index e1b2b61285b9..4f1a80b66ecf 100644
--- a/include/linux/mfd/max77693-private.h
+++ b/include/linux/mfd/max77693-private.h
@@ -438,6 +438,11 @@ enum max77693_irq_source {
        MAX77693_IRQ_GROUP_NR,
 };
 
+#define SRC_IRQ_CHARGER                        BIT(0)
+#define SRC_IRQ_TOP                    BIT(1)
+#define SRC_IRQ_FLASH                  BIT(2)
+#define SRC_IRQ_MUIC                   BIT(3)
+
 #define LED_IRQ_FLED2_OPEN             BIT(0)
 #define LED_IRQ_FLED2_SHORT            BIT(1)
 #define LED_IRQ_FLED1_OPEN             BIT(2)
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to