Dear Kukjin,
On 10/28/2014 07:50 PM, Kukjin Kim wrote:
> Chanwoo Choi wrote:
>>
> Hi,
>
>> This patch adds new exynos4415.dtsi to support Exynos4415 SoC
>> based on Cortex-A9 quad cores and includes following dt nodes:
>>
>> - GIC interrupt controller (GIC-400)
>> - Pinctrl to control three GPIO parts
>> - CMU (Clock Management Unit) for CMU/CMU_DMC/AUDSS
>> - CPU information (Cortex-A9 quad cores)
>> - UART to support serial port
>> - MCT (Multi Core Timer)
>> - ADC (Analog Digital Converter)
>> - RTC (Real Time Clock)
>> - I2C/SPI busses
>> - Power domains (CAM, TV, MFC, G3D, LCD0, ISP0/1)
>> - PMU (Performance Monitoring Unit)
>> - MSHC (Mobile Storage Host Controller)
>> - EHCI (Enhanced Host Controller Interface)
>> - OHIC (Open Host Controller Interface)
>> - USB 2.0 device with hsotg
>> - PWM (Pluse Width Modulation) Timer
>> - AMBA bus for PDMA0/1
>> - SYSRAM node for memory mapping
>> - SYSREG node for memory mapping
>> - PMU (Power Management Unit) node for memory mapping
>>
>> Cc: Kukjin Kim <[email protected]>
>> Cc: Ben Dooks <[email protected]>
>> Cc: Russell King <[email protected]>
>> Cc: Mark Rutland <[email protected]>
>> Cc: Olof Johansson <[email protected]>
>> Cc: Arnd Bergmann <[email protected]>
>> Signed-off-by: Chanwoo Choi <[email protected]>
>> Signed-off-by: Seung-Woo Kim <[email protected]>
>> [m.szyprowski: Add OHCI node and correct EHCI node]
>> Signed-off-by: Marek Szyprowski <[email protected]>
>> [yj44.cho: Add mipi-phy node]
>> Signed-off-by: YoungJun Cho <[email protected]>
>> [jaewon02: Add EHCI and SPI_2 node]
>> Signed-off-by: Jaewon Kim <[email protected]>
>> [ideal.song: Add I2S0 node for audio interface]
>> Signed-off-by: Inha Song <[email protected]>
>> [tomasz.figa: Add L2 cache node]
>> Signed-off-by: Tomasz Figa <[email protected]>
>> Acked-by: Kyungmin Park <Kyungmin [email protected]>
>> ---
>> arch/arm/boot/dts/exynos4415-pinctrl.dtsi | 613
>> +++++++++++++++++++++++++++++
>> arch/arm/boot/dts/exynos4415.dtsi | 627
>> ++++++++++++++++++++++++++++++
>> 2 files changed, 1240 insertions(+)
>> create mode 100644 arch/arm/boot/dts/exynos4415-pinctrl.dtsi
>> create mode 100644 arch/arm/boot/dts/exynos4415.dtsi
>
> [...]
>
>> +
>> + mp00: mp00 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> + };
>
> After talking about above gpio ports in intranet, I thought again. And I'm
> still
> thinking just to remove them would be better because it will not be used.
> Let's
> remove useless mp related gpio ports (nodes) here.
OK.
>
>> +
>> + mp01: mp01 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> + };
>> +
>> + mp02: mp02 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> + };
>> +
>> + mp03: mp03 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> + };
>> +
>> + mp04: mp04 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> + };
>> +
>> + mp05: mp05 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> + };
>> +
>> + mp06: mp06 {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> + };
>
> Same as above.
OK.
>
> [...]
>
>> + etc: etc {
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> + };
>
> Same, above 'etc' port will not be used I think.
OK.
>
>> +};
>> diff --git a/arch/arm/boot/dts/exynos4415.dtsi
>> b/arch/arm/boot/dts/exynos4415.dtsi
>> new file mode 100644
>> index 0000000..078b1b8
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/exynos4415.dtsi
>> @@ -0,0 +1,627 @@
>> +/*
>> + * Samsung's Exynos4415 SoC device tree source
>> + *
>> + * Copyright (c) 2014 Samsung Electronics Co., Ltd.
>> + *
>> + * Samsung's Exynos4415 SoC device nodes are listed in this file. Exynos4415
>> + * based board files can include this file and provide values for board
>> specfic
>> + * bindings.
>> + *
>> + * Note: This file does not include device nodes for all the controllers in
>> + * Exynos4415 SoC. As device tree coverage for Exynos4415 increases,
>> additional
>> + * nodes can be added to this file.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +#include "skeleton.dtsi"
>> +#include <dt-bindings/clock/exynos4415.h>
>> +#include <dt-bindings/clock/exynos-audss-clk.h>
>> +
>> +/ {
>> + compatible = "samsung,exynos4415";
>> + interrupt-parent = <&gic>;
>> +
>> + aliases {
>> + pinctrl0 = &pinctrl_0;
>> + pinctrl1 = &pinctrl_1;
>> + pinctrl2 = &pinctrl_2;
>> + mshc0 = &mshc_0;
>> + mshc1 = &mshc_1;
>> + mshc2 = &mshc_2;
>> + spi0 = &spi_0;
>> + spi1 = &spi_1;
>> + spi2 = &spi_2;
>> + i2c0 = &i2c_0;
>> + i2c1 = &i2c_1;
>> + i2c2 = &i2c_2;
>> + i2c3 = &i2c_3;
>> + i2c4 = &i2c_4;
>> + i2c5 = &i2c_5;
>> + i2c6 = &i2c_6;
>> + i2c7 = &i2c_7;
>> + };
>> +
>> + cpus {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + cpu0: cpu@0 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a9";
>> + reg = <0xa00>;
>
> This should be same with above value of 'cpu@0', 0.
>
> You need to use one of following:
>
> cpu0: cpu@a00 {
> Or
> reg = <0x0>;
OK, I'll fix it.
>
>> + clock-frequency = <1600000000>;
>> + };
>> +
>> + cpu1: cpu@1 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a9";
>> + reg = <0xa01>;
>
> Same as above.
OK.
>
>> + clock-frequency = <1600000000>;
>> + };
>> +
>> + cpu2: cpu@2 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a9";
>> + reg = <0xa02>;
>
> Same.
OK.
>
>> + clock-frequency = <1600000000>;
>> + };
>> +
>> + cpu3: cpu@3 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a9";
>> + reg = <0xa03>;
>
> Same.
OK.
>
>> + clock-frequency = <1600000000>;
>> + };
>> + };
>> +
>> + soc: soc {
>> + compatible = "simple-bus";
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges;
>> +
>> + fixed-rate-clocks {
>
> Maybe 'fixed-rate-clocks' depends on board not SoC so need to move to board dt
> file?
OK, I'll remove fixed-rate-clocks.
>
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + xusbxti: clock@0 {
>> + compatible = "fixed-clock";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + reg = <0>;
>> + clock-frequency = <0>;
>> + #clock-cells = <0>;
>> + clock-output-names = "xusbxti";
>> + };
>> +
>> + xxti: clock@1 {
>> + compatible = "fixed-clock";
>> + reg = <1>;
>> + clock-frequency = <0>;
>> + #clock-cells = <0>;
>> + clock-output-names = "xxti";
>> + };
>> + };
>
> [...]
>
>
Best Regards,
Chanwoo Choi
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
