Hello, This patch adds the Intel ESB2 DID's to the i2c-i801.c and Kconfig files for I2C support. This patch was built against the 2.6.11.6 kernel. If acceptable, please apply. Note: This patch depends on the previous 1/6 patch for pci_ids.h
Thanks, Jason Gaston Signed-off-by: Jason Gaston <[EMAIL PROTECTED]> --- linux-2.6.11.6/drivers/i2c/busses/i2c-i801.c.orig 2005-03-28 09:07:27.647899568 -0800 +++ linux-2.6.11.6/drivers/i2c/busses/i2c-i801.c 2005-03-28 09:09:04.161227312 -0800 @@ -31,6 +31,7 @@ 6300ESB 25A4 ICH6 266A ICH7 27DA + ESB2 269B This driver supports several versions of Intel's I/O Controller Hubs (ICH). For SMBus support, they are similar to the PIIX4 and are part of Intel's '810' and other chipsets. @@ -558,6 +559,7 @@ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_4) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_16) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_17) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_17) }, { 0, } }; --- linux-2.6.11.6/drivers/i2c/busses/Kconfig.orig 2005-03-28 09:09:12.982886216 -0800 +++ linux-2.6.11.6/drivers/i2c/busses/Kconfig 2005-03-28 09:09:32.875862024 -0800 @@ -123,6 +123,7 @@ 6300ESB ICH6 ICH7 + ESB2 This driver can also be built as a module. If so, the module will be called i2c-i801. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/