On Fri, Oct 10, 2014 at 10:10:45AM +0200, Matthias Brugger wrote: > 2014-10-09 23:52 GMT+02:00 Greg KH <[email protected]>: > > On Thu, Oct 09, 2014 at 06:23:31PM +0200, Matthias Brugger wrote: > >> The calculation of value quot for highspeed register set to three > >> was wrong. This patch fixes the calculation so that the serial port > >> for baudrates bigger then 576000 baud is working correctly. > >> > >> Signed-off-by: Matthias Brugger <[email protected]> > >> --- > >> drivers/tty/serial/8250/8250_mtk.c | 2 +- > >> 1 file changed, 1 insertion(+), 1 deletion(-) > >> > >> diff --git a/drivers/tty/serial/8250/8250_mtk.c > >> b/drivers/tty/serial/8250/8250_mtk.c > >> index 1c4b4bf..4376c48 100644 > >> --- a/drivers/tty/serial/8250/8250_mtk.c > >> +++ b/drivers/tty/serial/8250/8250_mtk.c > >> @@ -81,7 +81,7 @@ mtk8250_set_termios(struct uart_port *port, struct > >> ktermios *termios, > >> /* Set to highest baudrate supported */ > >> if (baud >= 1152000) > >> baud = 921600; > >> - quot = DIV_ROUND_CLOSEST(port->uartclk, 256 * baud); > >> + quot = (port->uartclk / (256 * baud)) + 1; > >> } > >> > >> /* > > > > Has this always been incorrect, or was it caused by a specific patch? > > It has always been incorrect :o > > > Should it go to the stable kernels? If so, how far back? > > No need to go to the stable kernels. The driver is only in linux-next.
Well, it's in 3.18-rc1, so it should at least go into 3.18-final. I'll queue it up for that. thanks, greg k-h -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
