On Fri, 07 Nov 2014, Peter Griffin wrote: > The stih410 has some additional usb controllers. This patch adds the > dt nodes which will enabled them to function correctly. > > Signed-off-by: Peter Griffin <[email protected]> > --- > arch/arm/boot/dts/stih407.dtsi | 60 > ++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 60 insertions(+) > > diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi > index 967ec39..5e01db2 100644 > --- a/arch/arm/boot/dts/stih407.dtsi > +++ b/arch/arm/boot/dts/stih407.dtsi > @@ -321,5 +321,65 @@ > reset-names = "global", > "port"; > }; > + > + ohci0: usb@9a03c00 { > + compatible = "st,st-ohci-300x"; > + status = "disabled";
Being picky, I like to see the node status at the bottom in clear view, but apart from that patch looks good: Acked-by: Lee Jones <[email protected]> > + reg = <0x9a03c00 0x100>; > + interrupts = <GIC_SPI 180 IRQ_TYPE_NONE>; > + clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; > + resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>, > + <&softreset STIH407_USB2_PORT0_SOFTRESET>; > + reset-names = "power", "softreset"; > + > + phys = <&usb2_picophy0>; > + phy-names = "usb"; > + }; > + > + ehci0: usb@9a03e00 { > + compatible = "st,st-ehci-300x"; > + status = "disabled"; > + reg = <0x9a03e00 0x100>; > + interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usb0>; > + clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; > + resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>, > + <&softreset STIH407_USB2_PORT0_SOFTRESET>; > + reset-names = "power", "softreset"; > + > + phys = <&usb2_picophy0>; > + phy-names = "usb"; > + }; > + > + ohci1: usb@9a83c00 { > + compatible = "st,st-ohci-300x"; > + status = "disabled"; > + reg = <0x9a83c00 0x100>; > + interrupts = <GIC_SPI 181 IRQ_TYPE_NONE>; > + clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; > + resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>, > + <&softreset STIH407_USB2_PORT1_SOFTRESET>; > + reset-names = "power", "softreset"; > + > + phys = <&usb2_picophy1>; > + phy-names = "usb"; > + }; > + > + ehci1: usb@9a83e00 { > + compatible = "st,st-ehci-300x"; > + status = "disabled"; > + reg = <0x9a83e00 0x100>; > + interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usb1>; > + clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>; > + resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>, > + <&softreset STIH407_USB2_PORT1_SOFTRESET>; > + reset-names = "power", "softreset"; > + > + phys = <&usb2_picophy1>; > + phy-names = "usb"; > + }; > }; > }; -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
