Refactor led-mode error handling.
Signed-off-by: Johan Hovold <[email protected]>
---
drivers/net/phy/micrel.c | 19 ++++++++++---------
1 file changed, 10 insertions(+), 9 deletions(-)
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 1b3985cdc64c..ec9ce35e934b 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -179,14 +179,19 @@ static int kszphy_setup_led(struct phy_device *phydev,
}
temp = phy_read(phydev, reg);
- if (temp < 0)
- return temp;
+ if (temp < 0) {
+ rc = temp;
+ goto out;
+ }
temp &= ~(3 << shift);
temp |= val << shift;
rc = phy_write(phydev, reg, temp);
+out:
+ if (rc < 0)
+ dev_err(&phydev->dev, "failed to set led mode\n");
- return rc < 0 ? rc : 0;
+ return rc;
}
/* Disable PHY address 0 as the broadcast address, so that it can be used as a
@@ -223,9 +228,7 @@ static int ksz8021_config_init(struct phy_device *phydev)
{
int rc;
- rc = kszphy_setup_led(phydev, 0x1f, 4);
- if (rc)
- dev_err(&phydev->dev, "failed to set led mode\n");
+ kszphy_setup_led(phydev, 0x1f, 4);
rc = ksz_config_flags(phydev);
if (rc < 0)
@@ -240,9 +243,7 @@ static int ks8051_config_init(struct phy_device *phydev)
{
int rc;
- rc = kszphy_setup_led(phydev, 0x1f, 4);
- if (rc)
- dev_err(&phydev->dev, "failed to set led mode\n");
+ kszphy_setup_led(phydev, 0x1f, 4);
rc = ksz_config_flags(phydev);
return rc < 0 ? rc : 0;
--
2.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
