FYI, we noticed the below changes on(TBH, I don't know the bisect is
correct or not; sorry for the noise if not)
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git lsm/stacking
commit 58c4f9e3be81a85839ea229b1dd36bf55232d440 ("LSM: Refactor existing LSM
stacking")
+------------------------------------------------+------------+------------+
| | c9979f3c6e | 58c4f9e3be |
+------------------------------------------------+------------+------------+
| boot_successes | 15 | 0 |
| early-boot-hang | 1 | |
| boot_failures | 0 | 15 |
| Kernel_panic-not_syncing:No_working_init_found | 0 | 15 |
| backtrace:panic | 0 | 15 |
+------------------------------------------------+------------+------------+
[ 3.437279] Starting init: /sbin/init exists but couldn't execute it (error
-12)
[ 3.438655] Starting init: /etc/init exists but couldn't execute it (error
-13)
[ 3.440136] Starting init: /bin/sh exists but couldn't execute it (error -12)
[ 3.441487] Kernel panic - not syncing: No working init found. Try passing
init= option to kernel. See Linux Documentation/init.txt for guidance.
[ 3.443352] CPU: 0 PID: 1 Comm: swapper Not tainted 3.18.0-rc4-g49aba53 #1949
[ 3.443352] 00000000 f783d540 80017f88 8138c3bd 80017fa0 8138b30b 815e1f40
f783d540
[ 3.443352] 815e1f40 00000000 80017fac 81389523 8152ab4d 80016000 813918e0
81389474
[ 3.443352] 00000000 00000000 00000000 00000000 00000000 00000000 0000007b
0000007b
[ 3.443352] Call Trace:
[ 3.443352] [<8138c3bd>] dump_stack+0x16/0x18
[ 3.443352] [<8138b30b>] panic+0x86/0x19e
[ 3.443352] [<81389523>] kernel_init+0xaf/0xb3
[ 3.443352] [<813918e0>] ret_from_kernel_thread+0x20/0x30
[ 3.443352] [<81389474>] ? rest_init+0xa2/0xa2
[ 3.443352] Kernel Offset: 0x0 from 0x81000000 (relocation range:
0x80000000-0x947fdfff)
Elapsed time: 10
--yliu
early console in setup code
Probing EDD (edd=off to disable)... ok
[ 0.000000] Linux version 3.18.0-rc4-g49aba53 (kbuild@lkp-hsx01) (gcc
version 4.9.1 (Debian 4.9.1-19) ) #1949 Sat Nov 15 06:21:52 CST 2014
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000013ffdfff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000013ffe000-0x0000000013ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x13ffe max_arch_pfn = 0x1000000
[ 0.000000] initial memory mapped: [mem 0x00000000-0x027fffff]
[ 0.000000] Base memory trampoline at [8009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x13200000-0x133fffff]
[ 0.000000] [mem 0x13200000-0x133fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x10000000-0x131fffff]
[ 0.000000] [mem 0x10000000-0x131fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x0fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x0fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x13400000-0x13ffdfff]
[ 0.000000] [mem 0x13400000-0x13dfffff] page 2M
[ 0.000000] [mem 0x13e00000-0x13ffdfff] page 4k
[ 0.000000] BRK [0x01f22000, 0x01f22fff] PGTABLE
[ 0.000000] BRK [0x01f23000, 0x01f23fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x135e9000-0x13feffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000FD950 000014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 0x13FFE450 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC
00000001)
[ 0.000000] ACPI: FACP 0x13FFFF80 000074 (v01 BOCHS BXPCFACP 00000001 BXPC
00000001)
[ 0.000000] ACPI: DSDT 0x13FFE490 0011A9 (v01 BXPC BXDSDT 00000001 INTL
20100528)
[ 0.000000] ACPI: FACS 0x13FFFF40 000040
[ 0.000000] ACPI: SSDT 0x13FFF7A0 000796 (v01 BOCHS BXPCSSDT 00000001 BXPC
00000001)
[ 0.000000] ACPI: APIC 0x13FFF680 000080 (v01 BOCHS BXPCAPIC 00000001 BXPC
00000001)
[ 0.000000] ACPI: HPET 0x13FFF640 000038 (v01 BOCHS BXPCHPET 00000001 BXPC
00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffc000 ( fee00000)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 319MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 13ffe000
[ 0.000000] low ram: 0 - 13ffe000
[ 0.000000] cma: dma_contiguous_reserve(limit 13ffe000)
[ 0.000000] cma: dma_contiguous_reserve: reserving 16 MiB for global area
[ 0.000000] cma: cma_declare_contiguous(size 0x0000000001000000, base
0x0000000000000000, limit 0x0000000013ffe000 alignment 0x0000000000000000)
[ 0.000000] cma: Reserved 16 MiB at 0x0000000012400000
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: cpu 0, msr 0:13ffd001, primary cpu clock
[ 0.000000] BRK [0x01f24000, 0x01f24fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00001000-0x13ffdfff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x13ffdfff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x13ffdfff]
[ 0.000000] On node 0 totalpages: 81820
[ 0.000000] free_area_init_node: node 0, pgdat 8161de20, node_mem_map
92180020
[ 0.000000] Normal zone: 640 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 81820 pages, LIFO batch:15
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffc000 ( fee00000)
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1
ignored.
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT
02
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT
05
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT
09
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT
0a
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT
0b
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT
01
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT
03
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT
04
[ 0.000000] ACPI: IRQ5 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT
06
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT
07
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT
08
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT
0c
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT
0d
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT
0e
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT
0f
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] mapped IOAPIC to ffffb000 (fec00000)
[ 0.000000] KVM setup async PF for cpu 0
[ 0.000000] kvm-stealtime: cpu 0, msr 15dafc0
[ 0.000000] e820: [mem 0x14000000-0xfeffbfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 81180
[ 0.000000] Kernel command line: user=lkp
job=/lkp/scheduled/vm-kbuild-yocto-i386-6/rand_boot-1-yocto-minimal-i386.cgz-i386-randconfig-ha3-1109-49aba53037eb271723dda0be3d2a826e579aa9a4-1.yaml
ARCH=i386
BOOT_IMAGE=/kernel/i386-randconfig-ha3-1109/49aba53037eb271723dda0be3d2a826e579aa9a4/vmlinuz-3.18.0-rc4-g49aba53
kconfig=i386-randconfig-ha3-1109
commit=49aba53037eb271723dda0be3d2a826e579aa9a4
branch=linux-devel/devel-lkp-hsx01-i386-201411150616 root=/dev/ram0
max_uptime=3600
RESULT_ROOT=/result/vm-kbuild-yocto-i386/boot/1/yocto-minimal-i386.cgz/i386-randconfig-ha3-1109/49aba53037eb271723dda0be3d2a826e579aa9a4/0
ip=::::vm-kbuild-yocto-i386-6::dhcp earlyprintk=ttyS0,115200 debug apic=debug
sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1
softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2
prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw
drbd.minor_count=8
[ 0.000000] sysrq: sysrq always enabled.
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 282016K/327280K available (3659K kernel code, 381K
rwdata, 2244K rodata, 420K init, 8696K bss, 45264K reserved, 0K highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfffa2000 - 0xfffff000 ( 372 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffa00000 (2048 kB)
[ 0.000000] vmalloc : 0x947fe000 - 0xff7fe000 (1712 MB)
[ 0.000000] lowmem : 0x80000000 - 0x93ffe000 ( 319 MB)
[ 0.000000] .init : 0x81627000 - 0x81690000 ( 420 kB)
[ 0.000000] .data : 0x81392fe2 - 0x81625560 (2633 kB)
[ 0.000000] .text : 0x81000000 - 0x81392fe2 (3659 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor
mode...Ok.
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:256 0
[ 0.000000] CPU 0 irqstacks, hard=80094000 soft=80096000
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc.,
Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 32768
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 65536
[ 0.000000] ... CHAINHASH_SIZE: 32768
[ 0.000000] memory used by lock dependency info: 4911 kB
[ 0.000000] per task-struct memory footprint: 1152 bytes
[ 0.000000] ------------------------
[ 0.000000] | Locking API testsuite:
[ 0.000000]
----------------------------------------------------------------------------
[ 0.000000] | spin |wlock |rlock |mutex |
wsem | rsem |
[ 0.000000]
--------------------------------------------------------------------------
[ 0.000000] A-A deadlock: ok | ok | ok | ok |
ok | ok |
[ 0.000000] A-B-B-A deadlock: ok | ok | ok | ok |
ok | ok |
[ 0.000000] A-B-B-C-C-A deadlock: ok | ok | ok | ok |
ok | ok |
[ 0.000000] A-B-C-A-B-C deadlock: ok | ok | ok | ok |
ok | ok |
[ 0.000000] A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok |
ok | ok |
[ 0.000000] A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok |
ok | ok |
[ 0.000000] A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok |
ok | ok |
[ 0.000000] double unlock: ok | ok | ok | ok |
ok | ok |
[ 0.000000] initialize held: ok | ok | ok | ok |
ok | ok |
[ 0.000000] bad unlock order: ok | ok | ok | ok |
ok | ok |
[ 0.000000]
--------------------------------------------------------------------------
[ 0.000000] recursive read-lock: | ok |
| ok |
[ 0.000000] recursive read-lock #2: | ok |
| ok |
[ 0.000000] mixed read-write-lock: | ok |
| ok |
[ 0.000000] mixed write-read-lock: | ok |
| ok |
[ 0.000000]
--------------------------------------------------------------------------
[ 0.000000] hard-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 0.000000] soft-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 0.000000] hard-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.000000] soft-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.000000] sirq-safe-A => hirqs-on/12: ok | ok | ok |
[ 0.000000] sirq-safe-A => hirqs-on/21: ok | ok | ok |
[ 0.000000] hard-safe-A + irqs-on/12: ok | ok | ok |
[ 0.000000] soft-safe-A + irqs-on/12: ok | ok | ok |
[ 0.000000] hard-safe-A + irqs-on/21: ok | ok | ok |
[ 0.000000] soft-safe-A + irqs-on/21: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 0.000000] hard-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 0.000000] soft-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/123: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/123: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/132: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/132: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/213: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/213: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/231: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/231: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/312: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/312: ok | ok | ok |
[ 0.000000] hard-irq lock-inversion/321: ok | ok | ok |
[ 0.000000] soft-irq lock-inversion/321: ok | ok | ok |
[ 0.000000] hard-irq read-recursion/123: ok |
[ 0.000000] soft-irq read-recursion/123: ok |
[ 0.000000] hard-irq read-recursion/132: ok |
[ 0.000000] soft-irq read-recursion/132: ok |
[ 0.000000] hard-irq read-recursion/213: ok |
[ 0.000000] soft-irq read-recursion/213: ok |
[ 0.000000] hard-irq read-recursion/231: ok |
[ 0.000000] soft-irq read-recursion/231: ok |
[ 0.000000] hard-irq read-recursion/312: ok |
[ 0.000000] soft-irq read-recursion/312: ok |
[ 0.000000] hard-irq read-recursion/321: ok |
[ 0.000000] soft-irq read-recursion/321: ok |
[ 0.000000]
--------------------------------------------------------------------------
[ 0.000000] | Wound/wait tests |
[ 0.000000] ---------------------
[ 0.000000] ww api failures: ok | ok | ok |
[ 0.000000] ww contexts mixing: ok | ok |
[ 0.000000] finishing ww context: ok | ok | ok | ok |
[ 0.000000] locking mismatches: ok | ok | ok |
[ 0.000000] EDEADLK handling: ok | ok | ok | ok |
ok | ok | ok | ok | ok | ok |
[ 0.000000] spinlock nest unlocked: ok |
[ 0.000000] -----------------------------------------------------
[ 0.000000] |block | try |context|
[ 0.000000] -----------------------------------------------------
[ 0.000000] context: ok | ok | ok |
[ 0.000000] try: ok | ok | ok |
[ 0.000000] block: ok | ok | ok |
[ 0.000000] spinlock: ok | ok | ok |
[ 0.000000] -------------------------------------------------------
[ 0.000000] Good, all 253 testcases passed! |
[ 0.000000] ---------------------------------
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Detected 2693.528 MHz processor
[ 0.006666] Calibrating delay loop (skipped) preset value.. 5389.51 BogoMIPS
(lpj=8978426)
[ 0.006666] pid_max: default: 4096 minimum: 301
[ 0.006666] ACPI: Core revision 20140926
[ 0.011384] ACPI: All ACPI Tables successfully acquired
[ 0.012275] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.013345] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.014739] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.014739] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.016328] CPU: Intel QEMU Virtual CPU version 1.7.1 (fam: 06, model: 06,
stepping: 03)
[ 0.019536] Performance Events: Broken PMU hardware detected, using software
events only.
[ 0.024105] Failed to access perfctr msr (MSR c1 is 0)
[ 0.027302] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.028093] Getting VERSION: 50014
[ 0.028600] Getting VERSION: 50014
[ 0.029121] Getting ID: 0
[ 0.029515] Getting ID: f000000
[ 0.030022] Getting LVT0: 8700
[ 0.030473] Getting LVT1: 8400
[ 0.031033] enabled ExtINT on CPU#0
[ 0.032887] ENABLING IO-APIC IRQs
[ 0.033352] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 0.034373] init IO_APIC IRQs
[ 0.034813] apic 0 pin 0 not connected
[ 0.035412] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0
Active:0 Dest:1)
[ 0.036721] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0
Active:0 Dest:1)
[ 0.037868] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0
Active:0 Dest:1)
[ 0.038987] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0
Active:0 Dest:1)
[ 0.040032] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0
Active:0 Dest:1)
[ 0.041139] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1
Active:0 Dest:1)
[ 0.042224] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0
Active:0 Dest:1)
[ 0.043365] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0
Active:0 Dest:1)
[ 0.044464] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0
Active:0 Dest:1)
[ 0.045543] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1
Active:0 Dest:1)
[ 0.046699] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1
Active:0 Dest:1)
[ 0.047838] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1
Active:0 Dest:1)
[ 0.048987] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0
Active:0 Dest:1)
[ 0.050035] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0
Active:0 Dest:1)
[ 0.051162] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0
Active:0 Dest:1)
[ 0.052285] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0
Active:0 Dest:1)
[ 0.053362] apic 0 pin 16 not connected
[ 0.053932] apic 0 pin 17 not connected
[ 0.054495] apic 0 pin 18 not connected
[ 0.055064] apic 0 pin 19 not connected
[ 0.055625] apic 0 pin 20 not connected
[ 0.056672] apic 0 pin 21 not connected
[ 0.057210] apic 0 pin 22 not connected
[ 0.057751] apic 0 pin 23 not connected
[ 0.058477] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.059558] Using local APIC timer interrupts.
[ 0.059558] calibrating APIC timer ...
[ 0.063333] ... lapic delta = 6250902
[ 0.063333] ... PM-Timer delta = 358008
[ 0.063333] ... PM-Timer result ok
[ 0.063333] ..... delta 6250902
[ 0.063333] ..... mult: 268474223
[ 0.063333] ..... calibration result: 3333814
[ 0.063333] ..... CPU clock speed is 2694.0593 MHz.
[ 0.063333] ..... host bus clock speed is 1000.0814 MHz.
[ 0.066659] prandom: seed boundary self test passed
[ 0.067389] prandom: 100 self tests passed
[ 0.068898] regulator-dummy: no parameters
[ 0.070231] RTC time: 6:23:17, date: 11/15/14
[ 0.071551] NET: Registered protocol family 16
[ 0.073965] EISA bus registered
[ 0.074703] cpuidle: using governor ladder
[ 0.076047] ACPI: bus type PCI registered
[ 0.076865] PCI: PCI BIOS revision 2.10 entry at 0xfc6d5, last bus=0
[ 0.078244] PCI: Using configuration type 1 for base access
[ 0.088828] Running resizable hashtable tests...
[ 0.089937] Adding 2048 keys
[ 0.090724] Traversal complete: counted=2048, nelems=2048, entries=2048
[ 0.092417] Table expansion iteration 0...
[ 0.093649] Verifying lookups...
[ 0.094562] Table expansion iteration 1...
[ 0.096675] Verifying lookups...
[ 0.097576] Table expansion iteration 2...
[ 0.099076] Verifying lookups...
[ 0.100029] Table expansion iteration 3...
[ 0.102256] Verifying lookups...
[ 0.103213] Table shrinkage iteration 0...
[ 0.103607] Verifying lookups...
[ 0.104504] Table shrinkage iteration 1...
[ 0.105613] Verifying lookups...
[ 0.106790] Table shrinkage iteration 2...
[ 0.107901] Verifying lookups...
[ 0.108812] Table shrinkage iteration 3...
[ 0.110044] Verifying lookups...
[ 0.110952] Deleting 2048 keys
[ 0.113524] ACPI: Added _OSI(Module Device)
[ 0.114470] ACPI: Added _OSI(Processor Device)
[ 0.115467] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.116552] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.118543] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1
Active:0 Dest:1)
[ 0.127311] ACPI: Interpreter enabled
[ 0.128190] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State
[\_S1_] (20140926/hwxface-580)
[ 0.130009] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State
[\_S2_] (20140926/hwxface-580)
[ 0.132137] ACPI: (supports S0 S3 S5)
[ 0.132950] ACPI: Using IOAPIC for interrupt routing
[ 0.133391] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 0.147232] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.148756] acpi PNP0A03:00: _OSC: OS supports [Segments]
[ 0.150046] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.152112] acpi PNP0A03:00: fail to add MMCONFIG information, can't access
extended PCI configuration space under this bridge.
[ 0.153553] PCI host bridge to bus 0000:00
[ 0.154498] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.156674] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.158145] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.160006] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.161670] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
[ 0.163435] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 0.165568] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 0.167674] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[ 0.172114] pci 0000:00:01.1: reg 0x20: [io 0xc080-0xc08f]
[ 0.174447] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.176304] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.178246] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.179950] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.180479] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[ 0.183851] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4
ACPI
[ 0.185458] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
[ 0.187182] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000
[ 0.190718] pci 0000:00:02.0: reg 0x10: [mem 0xfc000000-0xfdffffff pref]
[ 0.194022] pci 0000:00:02.0: reg 0x14: [mem 0xfebf0000-0xfebf0fff]
[ 0.202638] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
[ 0.204302] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[ 0.207717] pci 0000:00:03.0: reg 0x10: [mem 0xfeba0000-0xfebbffff]
[ 0.210008] pci 0000:00:03.0: reg 0x14: [io 0xc000-0xc03f]
[ 0.216223] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref]
[ 0.217275] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[ 0.221069] pci 0000:00:04.0: reg 0x10: [io 0xc040-0xc07f]
[ 0.223341] pci 0000:00:04.0: reg 0x14: [mem 0xfebf1000-0xfebf1fff]
[ 0.230538] pci 0000:00:05.0: [8086:25ab] type 00 class 0x088000
[ 0.232493] pci 0000:00:05.0: reg 0x10: [mem 0xfebf2000-0xfebf200f]
[ 0.238013] pci_bus 0000:00: on NUMA node 0
[ 0.240572] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.242384] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.244057] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.245762] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.247233] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[ 0.249734] ACPI: Enabled 16 GPEs in block 00 to 0F
[ 0.250718] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.252062] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.253346] vgaarb: loaded
[ 0.253985] vgaarb: bridge control possible 0000:00:02.0
[ 0.256962] ACPI: bus type USB registered
[ 0.258067] usbcore: registered new interface driver usbfs
[ 0.259481] usbcore: registered new interface driver hub
[ 0.260113] usbcore: registered new device driver usb
[ 0.261445] pps_core: LinuxPPS API ver. 1 registered
[ 0.263342] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
Giometti <[email protected]>
[ 0.265444] PTP clock support registered
[ 0.266836] PCI: Using ACPI for IRQ routing
[ 0.267830] PCI: pci_cache_line_size set to 32 bytes
[ 0.269187] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.270026] e820: reserve RAM buffer [mem 0x13ffe000-0x13ffffff]
[ 0.272168] NET: Registered protocol family 8
[ 0.273339] NET: Registered protocol family 20
[ 0.274906] Switched to clocksource kvm-clock
[ 0.274906] FS-Cache: Loaded
[ 0.275508] pnp: PnP ACPI init
[ 0.276373] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0
Active:0 Dest:1)
[ 0.278353] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.279907] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0
Active:0 Dest:1)
[ 0.281805] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.284322] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0
Active:0 Dest:1)
[ 0.286261] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.287895] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0
Active:0 Dest:1)
[ 0.289711] pnp 00:03: [dma 2]
[ 0.290505] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.292064] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0
Active:0 Dest:1)
[ 0.293929] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.295532] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0
Active:0 Dest:1)
[ 0.297472] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.299139] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0
Active:0 Dest:1)
[ 0.301038] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.303155] pnp: PnP ACPI: found 7 devices
[ 0.339550] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.340868] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.342101] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.343527] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
[ 0.345008] NET: Registered protocol family 2
[ 0.346551] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.348405] TCP bind hash table entries: 4096 (order: 5, 147456 bytes)
[ 0.350398] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.352107] TCP: reno registered
[ 0.352893] UDP hash table entries: 256 (order: 2, 20480 bytes)
[ 0.354360] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
[ 0.356131] NET: Registered protocol family 1
[ 0.358422] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.359802] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.361207] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.362672] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.364072] PCI: CLS 0 bytes, default 32
[ 0.365477] Unpacking initramfs...
[ 0.935579] Freeing initrd memory: 10268K (935e9000 - 93ff0000)
[ 0.937599] apm: BIOS not found.
[ 0.938854] cryptomgr_test (14) used greatest stack depth: 7180 bytes left
[ 0.941089] rcu-torture:--- Start of test: nreaders=1 nfakewriters=4
stat_interval=60 verbose=1 test_no_idle_hz=1 shuffle_interval=3 stutter=5
irqreader=1 fqs_duration=0 fqs_holdoff=0 fqs_stutter=3 test_boost=1/0
test_boost_interval=7 test_boost_duration=4 shutdown_secs=0 stall_cpu=0
stall_cpu_holdoff=10 n_barrier_cbs=0 onoff_interval=0 onoff_holdoff=0
[ 0.948064] rcu-torture: Creating rcu_torture_writer task
[ 0.949510] rcu-torture: Creating rcu_torture_fakewriter task
[ 0.950895] rcu-torture: rcu_torture_writer task started
[ 0.952099] rcu-torture: Creating rcu_torture_fakewriter task
[ 0.954221] rcu-torture: rcu_torture_fakewriter task started
[ 0.955364] rcu-torture: Creating rcu_torture_fakewriter task
[ 0.956546] rcu-torture: rcu_torture_fakewriter task started
[ 0.957712] rcu-torture: Creating rcu_torture_fakewriter task
[ 0.958888] rcu-torture: rcu_torture_fakewriter task started
[ 0.960043] rcu-torture: Creating rcu_torture_reader task
[ 0.961145] rcu-torture: rcu_torture_fakewriter task started
[ 0.962356] rcu-torture: Creating rcu_torture_stats task
[ 0.964508] rcu-torture: rcu_torture_reader task started
[ 0.965728] rcu-torture: Creating torture_shuffle task
[ 0.966989] rcu-torture: rcu_torture_stats task started
[ 0.968213] rcu-torture: Creating torture_stutter task
[ 0.969437] rcu-torture: torture_shuffle task started
[ 0.970649] rcu-torture: Creating rcu_torture_cbflood task
[ 0.971974] rcu-torture: torture_stutter task started
[ 0.973647] futex hash table entries: 16 (order: -3, 704 bytes)
[ 0.975017] Initialise system trusted keyring
[ 0.976163] audit: initializing netlink subsys (disabled)
[ 0.978370] rcu-torture: rcu_torture_cbflood task started
[ 0.979686] audit: type=2000 audit(1416003799.172:1): initialized
[ 0.981630] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.991906] zbud: loaded
[ 0.992865] VFS: Disk quotas dquot_6.5.2
[ 0.994008] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.996967] ceph: loaded (mds proto 32)
[ 0.999735] Key type asymmetric registered
[ 1.000747] Asymmetric key parser 'x509' registered
[ 1.003837] crc32: CRC_LE_BITS = 8, CRC_BE BITS = 8
[ 1.004973] crc32: self tests passed, processed 225944 bytes in 670157 nsec
[ 1.007234] crc32c: CRC_LE_BITS = 8
[ 1.008052] crc32c: self tests passed, processed 225944 bytes in 314686 nsec
[ 1.045077] crc32_combine: 8373 self tests passed
[ 1.083157] crc32c_combine: 8373 self tests passed
[ 1.084505] rbtree testing -> 13732 cycles
[ 1.631812] augmented rbtree testing -> 20496 cycles
[ 2.442926] tsc: Refined TSC clocksource calibration: 2693.505 MHz
[ 2.536081] intel_idle: does not run on family 6 model 6
[ 2.537744] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 2.539511] ACPI: Power Button [PWRF]
[ 2.540975] isapnp: Scanning for PnP cards...
[ 3.093858] isapnp: No Plug & Play device found
[ 3.094972] xenfs: not registering filesystem on non-xen platform
[ 3.096657] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 3.128743] serial 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200)
is a 16550A
[ 3.131570] Non-volatile memory driver v1.3
[ 3.132409] platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing
[ 3.133757] platform pc8736x_gpio.0: no device found
[ 3.134865] nsc_gpio initializing
[ 3.135508] smapi::smapi_init, ERROR invalid usSmapiID
[ 3.136460] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not
available on this machine
[ 3.138221] mwave: mwavedd::mwave_init: Error: Failed to initialize board
data
[ 3.139530] mwave: mwavedd::mwave_init: Error: Failed to initialize
[ 3.140837] dummy-irq: no IRQ given. Use irq=N
[ 3.141715] usbcore: registered new interface driver viperboard
[ 3.143080] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 3.144340] L440GX flash mapping: failed to find PIIX4 ISA bridge, cannot
continue
[ 3.178194] No valid DiskOnChip devices found
[ 3.179196] [nandsim] warning: read_byte: unexpected data output cycle,
state is STATE_READY return 0x0
[ 3.180941] [nandsim] warning: read_byte: unexpected data output cycle,
state is STATE_READY return 0x0
[ 3.182643] [nandsim] warning: read_byte: unexpected data output cycle,
state is STATE_READY return 0x0
[ 3.184401] [nandsim] warning: read_byte: unexpected data output cycle,
state is STATE_READY return 0x0
[ 3.186128] [nandsim] warning: read_byte: unexpected data output cycle,
state is STATE_READY return 0x0
[ 3.187868] [nandsim] warning: read_byte: unexpected data output cycle,
state is STATE_READY return 0x0
[ 3.189574] nand: device found, Manufacturer ID: 0x98, Chip ID: 0x39
[ 3.190763] nand: Toshiba NAND 128MiB 1,8V 8-bit
[ 3.191623] nand: 128MiB, SLC, page size: 512, OOB size: 16
[ 3.192742] flash size: 128 MiB
[ 3.193363] page size: 512 bytes
[ 3.193968] OOB area size: 16 bytes
[ 3.194612] sector size: 16 KiB
[ 3.195199] pages number: 262144
[ 3.195817] pages per sector: 32
[ 3.196453] bus width: 8
[ 3.196961] bits in sector size: 14
[ 3.197611] bits in page size: 9
[ 3.198214] bits in OOB size: 4
[ 3.198803] flash size with OOB: 135168 KiB
[ 3.199569] page address bytes: 4
[ 3.200212] sector address bytes: 3
[ 3.200860] options: 0x42
[ 3.202888] Scanning device for bad blocks
[ 3.249451] kworker/u2:1 (66) used greatest stack depth: 7048 bytes left
[ 3.250826] Creating 1 MTD partitions on "NAND 128MiB 1,8V 8-bit":
[ 3.251968] 0x000000000000-0x000008000000 : "NAND simulator partition 0"
[ 3.254839] tlan: ThunderLAN driver v1.17
[ 3.255883] tlan: 0 devices installed, PCI: 0 EISA: 0
[ 3.256991] adummy: version 1.0
[ 3.258076] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.259283] ehci-pci: EHCI PCI platform driver
[ 3.260715] fusbh200_hcd: FUSBH200 Host Controller (EHCI) Driver
[ 3.261879] fotg210_hcd: FOTG210 Host Controller (EHCI) Driver
[ 3.263043] usbcore: registered new interface driver cdc_acm
[ 3.264114] cdc_acm: USB Abstract Control Model driver for USB modems and
ISDN adapters
[ 3.265621] usbcore: registered new interface driver usblp
[ 3.266882] usbcore: registered new interface driver mdc800
[ 3.267920] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital
Camera
[ 3.269375] usbcore: registered new interface driver adutux
[ 3.270485] usbcore: registered new interface driver emi26 - firmware loader
[ 3.271830] usbcore: registered new interface driver emi62 - firmware loader
[ 3.273181] usbcore: registered new interface driver ldusb
[ 3.274277] usbcore: registered new interface driver rio500
[ 3.275366] usbcore: registered new interface driver usbtest
[ 3.277695] usbcore: registered new interface driver usb_ehset_test
[ 3.278886] usbcore: registered new interface driver usbsevseg
[ 3.279999] usbcore: registered new interface driver yurex
[ 3.282219] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at
0x60,0x64 irq 1,12
[ 3.284760] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.285731] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.288173] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
[ 3.290180] usbcore: registered new interface driver hanwang
[ 3.291402] usbcore: registered new interface driver sur40
[ 3.293489] Driver for 1-wire Dallas network protocol.
[ 3.294702] applesmc: supported laptop not found!
[ 3.295571] applesmc: driver init failed (ret=-19)!
[ 3.296881] Modular ISDN core version 1.1.29
[ 3.297800] NET: Registered protocol family 34
[ 3.299309] DSP module 2.0
[ 3.299832] mISDN_dsp: DSP clocks every 80 samples. This equals 3 jiffies.
[ 3.303804] gigaset: Driver for Gigaset 307x
[ 3.304605] gigaset: no ISDN subsystem interface
[ 3.305537] usbcore: registered new interface driver bas_gigaset
[ 3.306920] bas_gigaset: USB Driver for Gigaset 307x
[ 3.308067] platform eisa.0: Probing EISA bus 0
[ 3.308918] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 3.310336] beceem: Beceem Communications Inc. WiMAX driver, 5.2.45
[ 3.311491] Copyright 2010. Beceem Communications Inc
[ 3.312505] usbcore: registered new interface driver usbbcm
[ 3.313920] pss: mss_io, mss_dma, mss_irq and pss_io must be set.
[ 3.315052] ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen
1993-1996
[ 3.316487] ad1848: No ISAPnP cards found, trying standard ones...
[ 3.318688] MediaTrix audio driver Copyright (C) by Hannu Savolainen
1993-1996
[ 3.320028] I/O, IRQ, DMA and type are mandatory
[ 3.320884] YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob
Hooft 1993-1996
[ 3.322479] Netfilter messages via NETLINK v0.30.
[ 3.323396] nf_conntrack version 0.5.0 (4822 buckets, 19288 max)
[ 3.325019] ctnetlink v0.93: registering with nfnetlink.
[ 3.326127] gre: GRE over IPv4 demultiplexor driver
[ 3.327435] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.328499] TCP: highspeed registered
[ 3.329190] TCP: vegas registered
[ 3.329818] TCP: illinois registered
[ 3.330509] Initializing XFRM netlink socket
[ 3.331468] NET: Registered protocol family 4
[ 3.332314] can: controller area network core (rev 20120528 abi 9)
[ 3.333517] can: failed to create /proc/net/can . CONFIG_PROC_FS missing?
[ 3.334773] NET: Registered protocol family 29
[ 3.335692] NET: Registered protocol family 33
[ 3.336569] Key type rxrpc registered
[ 3.337277] Key type rxrpc_s registered
[ 3.338504] RxRPC: Registered security type 2 'rxkad'
[ 3.339472] mpoa:atm_mpoa_init: mpc.c: initialized
[ 3.340376] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet
Project Team
[ 3.342085] DECnet: Routing cache hash table of 256 buckets, 9Kbytes
[ 3.343531] NET: Registered protocol family 12
[ 3.344384] 8021q: 802.1Q VLAN Support v1.8
[ 3.346444] DCCP: Activated CCID 2 (TCP-like)
[ 3.347354] DCCP: Activated CCID 3 (TCP-Friendly Rate Control)
[ 3.348980] 9pnet: Installing 9P2000 support
[ 3.350518] Key type ceph registered
[ 3.351527] libceph: loaded (mon/osd proto 15/24)
[ 3.352421] mpls_gso: MPLS GSO support
[ 3.353177] mce: Unable to init device /dev/mcelog (rc: -5)
[ 3.354733]
[ 3.354733] printing PIC contents
[ 3.355646] ... PIC IMR: ffff
[ 3.356239] ... PIC IRR: 1013
[ 3.356851] ... PIC ISR: 0000
[ 3.357426] ... PIC ELCR: 0c00
[ 3.359131] printing local APIC contents on CPU#0/0:
[ 3.360060] ... APIC ID: 00000000 (0)
[ 3.360172] ... APIC VERSION: 00050014
[ 3.360172] ... APIC TASKPRI: 00000000 (00)
[ 3.360172] ... APIC PROCPRI: 00000000
[ 3.360172] ... APIC LDR: 01000000
[ 3.360172] ... APIC DFR: ffffffff
[ 3.360172] ... APIC SPIV: 000001ff
[ 3.360172] ... APIC ISR field:
[ 3.360172] 0000000000000000000000000000000000000000000000000000000000000000
[ 3.360172] ... APIC TMR field:
[ 3.360172] 0000000002000000000000000000000000000000000000000000000000000000
[ 3.360172] ... APIC IRR field:
[ 3.360172] 0000000000000000000000000000000000000000000000000000000000008000
[ 3.360172] ... APIC ESR: 00000000
[ 3.360172] ... APIC ICR: 00000831
[ 3.360172] ... APIC ICR2: 01000000
[ 3.360172] ... APIC LVTT: 000000ef
[ 3.360172] ... APIC LVTPC: 00000400
[ 3.360172] ... APIC LVT0: 00010700
[ 3.360172] ... APIC LVT1: 00000400
[ 3.360172] ... APIC LVTERR: 000000fe
[ 3.360172] ... APIC TMICT: 000302af
[ 3.360172] ... APIC TMCCT: 00000000
[ 3.360172] ... APIC TDCR: 00000003
[ 3.360172]
[ 3.379256] number of MP IRQ sources: 15.
[ 3.380024] number of IO-APIC #0 registers: 24.
[ 3.380863] testing the IO APIC.......................
[ 3.381877] IO APIC #0......
[ 3.382409] .... register #00: 00000000
[ 3.383117] ....... : physical APIC id: 00
[ 3.383945] ....... : Delivery Type: 0
[ 3.384674] ....... : LTS : 0
[ 3.385452] .... register #01: 00170011
[ 3.386176] ....... : max redirection entries: 17
[ 3.388133] ....... : PRQ implemented: 0
[ 3.388949] ....... : IO APIC version: 11
[ 3.389749] .... register #02: 00000000
[ 3.390491] ....... : arbitration: 00
[ 3.391244] .... IRQ redirection table:
[ 3.391972] 1 0 0 0 0 0 0 00
[ 3.392817] 0 0 0 0 0 1 1 31
[ 3.393686] 0 0 0 0 0 1 1 30
[ 3.394541] 0 0 0 0 0 1 1 33
[ 3.395397] 1 0 0 0 0 1 1 34
[ 3.396407] 1 1 0 0 0 1 1 35
[ 3.397377] 0 0 0 0 0 1 1 36
[ 3.398227] 0 0 0 0 0 1 1 37
[ 3.399072] 0 0 0 0 0 1 1 38
[ 3.399920] 0 1 0 0 0 1 1 39
[ 3.400778] 1 1 0 0 0 1 1 3A
[ 3.401640] 1 1 0 0 0 1 1 3B
[ 3.402482] 0 0 0 0 0 1 1 3C
[ 3.403331] 0 0 0 0 0 1 1 3D
[ 3.404204] 0 0 0 0 0 1 1 3E
[ 3.405080] 0 0 0 0 0 1 1 3F
[ 3.405936] 1 0 0 0 0 0 0 00
[ 3.406805] 1 0 0 0 0 0 0 00
[ 3.407644] 1 0 0 0 0 0 0 00
[ 3.408500] 1 0 0 0 0 0 0 00
[ 3.409350] 1 0 0 0 0 0 0 00
[ 3.410223] 1 0 0 0 0 0 0 00
[ 3.411076] 1 0 0 0 0 0 0 00
[ 3.411917] 1 0 0 0 0 0 0 00
[ 3.412744] IRQ to pin mappings:
[ 3.413383] IRQ0 -> 0:2
[ 3.413896] IRQ1 -> 0:1
[ 3.414401] IRQ3 -> 0:3
[ 3.414910] IRQ4 -> 0:4
[ 3.415414] IRQ5 -> 0:5
[ 3.415971] IRQ6 -> 0:6
[ 3.416617] IRQ7 -> 0:7
[ 3.417365] IRQ8 -> 0:8
[ 3.418577] IRQ9 -> 0:9
[ 3.419091] IRQ10 -> 0:10
[ 3.419630] IRQ11 -> 0:11
[ 3.420214] IRQ12 -> 0:12
[ 3.420749] IRQ13 -> 0:13
[ 3.421312] IRQ14 -> 0:14
[ 3.421854] IRQ15 -> 0:15
[ 3.422388] .................................... done.
[ 3.423391] Using IPI Shortcut mode
[ 3.424305] Loading compiled-in X.509 certificates
[ 3.429368] Loaded X.509 cert 'Magrathea: Glacier signing key:
2924c86ca20732dc33fa7b70146c30e3143dfe26'
[ 3.431910] Magic number: 6:614:367
[ 3.432637] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[ 3.434987] Freeing unused kernel memory: 420K (81627000 - 81690000)
[ 3.436338] Failed to execute /init (error -12)
[ 3.437279] Starting init: /sbin/init exists but couldn't execute it (error
-12)
[ 3.438655] Starting init: /etc/init exists but couldn't execute it (error
-13)
[ 3.440136] Starting init: /bin/sh exists but couldn't execute it (error -12)
[ 3.441487] Kernel panic - not syncing: No working init found. Try passing
init= option to kernel. See Linux Documentation/init.txt for guidance.
[ 3.443352] CPU: 0 PID: 1 Comm: swapper Not tainted 3.18.0-rc4-g49aba53 #1949
[ 3.443352] 00000000 f783d540 80017f88 8138c3bd 80017fa0 8138b30b 815e1f40
f783d540
[ 3.443352] 815e1f40 00000000 80017fac 81389523 8152ab4d 80016000 813918e0
81389474
[ 3.443352] 00000000 00000000 00000000 00000000 00000000 00000000 0000007b
0000007b
[ 3.443352] Call Trace:
[ 3.443352] [<8138c3bd>] dump_stack+0x16/0x18
[ 3.443352] [<8138b30b>] panic+0x86/0x19e
[ 3.443352] [<81389523>] kernel_init+0xaf/0xb3
[ 3.443352] [<813918e0>] ret_from_kernel_thread+0x20/0x30
[ 3.443352] [<81389474>] ? rest_init+0xa2/0xa2
[ 3.443352] Kernel Offset: 0x0 from 0x81000000 (relocation range:
0x80000000-0x947fdfff)
Elapsed time: 10
qemu-system-i386 -enable-kvm -kernel
/kernel/i386-randconfig-ha3-1109/49aba53037eb271723dda0be3d2a826e579aa9a4/vmlinuz-3.18.0-rc4-g49aba53
-append 'user=lkp
job=/lkp/scheduled/vm-kbuild-yocto-i386-6/rand_boot-1-yocto-minimal-i386.cgz-i386-randconfig-ha3-1109-49aba53037eb271723dda0be3d2a826e579aa9a4-1.yaml
ARCH=i386
BOOT_IMAGE=/kernel/i386-randconfig-ha3-1109/49aba53037eb271723dda0be3d2a826e579aa9a4/vmlinuz-3.18.0-rc4-g49aba53
kconfig=i386-randconfig-ha3-1109
commit=49aba53037eb271723dda0be3d2a826e579aa9a4
branch=linux-devel/devel-lkp-hsx01-i386-201411150616 root=/dev/ram0
max_uptime=3600
RESULT_ROOT=/result/vm-kbuild-yocto-i386/boot/1/yocto-minimal-i386.cgz/i386-randconfig-ha3-1109/49aba53037eb271723dda0be3d2a826e579aa9a4/0
ip=::::vm-kbuild-yocto-i386-6::dhcp earlyprintk=ttyS0,115200 debug apic=debug
sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1
softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2
prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw
drbd.minor_count=8' -initrd /fs/sde1/initrd-vm-kbuild-yocto-i386-6 -m 320 -smp
2 -net nic,vlan=1,model=e1000 -net user,vlan=1 -boot order=nc -no-reboot
-watchdog i6300esb -rtc base=localtime -drive
file=/fs/sde1/disk0-vm-kbuild-yocto-i386-6,media=disk,if=virtio -pidfile
/dev/shm/kboot/pid-vm-kbuild-yocto-i386-6 -serial
file:/dev/shm/kboot/serial-vm-kbuild-yocto-i386-6 -daemonize -display none
-monitor null
_______________________________________________
LKP mailing list
[email protected]
