Hi, On Mon, Nov 17, 2014 at 02:41:39PM -0800, Andrew Bresticker wrote: > diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig > index a3ca137..e2415d3 100644 > --- a/drivers/usb/host/Kconfig > +++ b/drivers/usb/host/Kconfig > @@ -50,6 +50,15 @@ config USB_XHCI_RCAR > Say 'Y' to enable the support for the xHCI host controller > found in Renesas R-Car ARM SoCs. > > +config USB_XHCI_TEGRA > + tristate "xHCI support for NVIDIA Tegra SoCs" > + depends on ARCH_TEGRA
it would be nice if you could still leave || COMPILE_TEST here.
[snip]
> +static const struct {
> + const char *name;
> + unsigned int num;
> +} tegra_xhci_phy_types[] = {
> + {
> + .name = "usb3",
> + .num = TEGRA_XUSB_USB3_PHYS,
> + }, {
> + .name = "utmi",
> + .num = TEGRA_XUSB_UTMI_PHYS,
> + }, {
> + .name = "hsic",
> + .num = TEGRA_XUSB_HSIC_PHYS,
> + },
these should be using the generic PHY subsystem (drivers/phy).
> +static int tegra_xhci_load_firmware(struct tegra_xhci_hcd *tegra)
> +{
> + struct device *dev = tegra->dev;
> + struct tegra_xhci_fw_cfgtbl *cfg_tbl;
> + struct tm fw_tm;
> + u32 val, code_tag_blocks, code_size_blocks;
> + u64 fw_base;
> + time_t fw_time;
> + unsigned long timeout;
> +
> + if (csb_readl(tegra, XUSB_CSB_MP_ILOAD_BASE_LO) != 0) {
> + dev_info(dev, "Firmware already loaded, Falcon state 0x%x\n",
> + csb_readl(tegra, XUSB_FALC_CPUCTL));
> + return 0;
> + }
won't this prevent rmmod && insmod from succeeding ? Maybe not, as you
return 0 anyway, but if the firmware side craps out, it might be useful
to reload the firmware and reset that block. I wonder if this prevents
that.
--
balbi
signature.asc
Description: Digital signature
