On December 20, 2014 5:35:17 PM EST, Rickard Strandqvist
<rickard_strandqv...@spectrumdigital.se> wrote:
>Removes some functions that are not used anywhere:
>snd_cx18_mixer_tv_vol_get() snd_cx18_mixer_tv_vol_info()
>snd_cx18_mixer_tv_vol_put()
>
>This was partially found by using a static code analysis program called
>cppcheck.
>
>Signed-off-by: Rickard Strandqvist
><rickard_strandqv...@spectrumdigital.se>
>---
>drivers/media/pci/cx18/cx18-alsa-mixer.c | 62
>------------------------------
> 1 file changed, 62 deletions(-)
>
>diff --git a/drivers/media/pci/cx18/cx18-alsa-mixer.c
>b/drivers/media/pci/cx18/cx18-alsa-mixer.c
>index 341bddc..e7b0a1f 100644
>--- a/drivers/media/pci/cx18/cx18-alsa-mixer.c
>+++ b/drivers/media/pci/cx18/cx18-alsa-mixer.c
>@@ -69,68 +69,6 @@ static inline int cx18_av_vol_to_dB(int v)
> return (v >> 9) - 119;
> }
>
>-static int snd_cx18_mixer_tv_vol_info(struct snd_kcontrol *kcontrol,
>- struct snd_ctl_elem_info *uinfo)
>-{
>- uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
>- uinfo->count = 1;
>- /* We're already translating values, just keep this control in dB */
>- uinfo->value.integer.min = -96;
>- uinfo->value.integer.max = 8;
>- uinfo->value.integer.step = 1;
>- return 0;
>-}
>-
>-static int snd_cx18_mixer_tv_vol_get(struct snd_kcontrol *kctl,
>- struct snd_ctl_elem_value *uctl)
>-{
>- struct snd_cx18_card *cxsc = snd_kcontrol_chip(kctl);
>- struct cx18 *cx = to_cx18(cxsc->v4l2_dev);
>- struct v4l2_control vctrl;
>- int ret;
>-
>- vctrl.id = V4L2_CID_AUDIO_VOLUME;
>- vctrl.value = dB_to_cx18_av_vol(uctl->value.integer.value[0]);
>-
>- snd_cx18_lock(cxsc);
>- ret = v4l2_subdev_call(cx->sd_av, core, g_ctrl, &vctrl);
>- snd_cx18_unlock(cxsc);
>-
>- if (!ret)
>- uctl->value.integer.value[0] = cx18_av_vol_to_dB(vctrl.value);
>- return ret;
>-}
>-
>-static int snd_cx18_mixer_tv_vol_put(struct snd_kcontrol *kctl,
>- struct snd_ctl_elem_value *uctl)
>-{
>- struct snd_cx18_card *cxsc = snd_kcontrol_chip(kctl);
>- struct cx18 *cx = to_cx18(cxsc->v4l2_dev);
>- struct v4l2_control vctrl;
>- int ret;
>-
>- vctrl.id = V4L2_CID_AUDIO_VOLUME;
>- vctrl.value = dB_to_cx18_av_vol(uctl->value.integer.value[0]);
>-
>- snd_cx18_lock(cxsc);
>-
>- /* Fetch current state */
>- ret = v4l2_subdev_call(cx->sd_av, core, g_ctrl, &vctrl);
>-
>- if (ret ||
>- (cx18_av_vol_to_dB(vctrl.value) != uctl->value.integer.value[0]))
>{
>-
>- /* Set, if needed */
>- vctrl.value = dB_to_cx18_av_vol(uctl->value.integer.value[0]);
>- ret = v4l2_subdev_call(cx->sd_av, core, s_ctrl, &vctrl);
>- if (!ret)
>- ret = 1; /* Indicate control was changed w/o error */
>- }
>- snd_cx18_unlock(cxsc);
>-
>- return ret;
>-}
>-
>
>/* This is a bit of overkill, the slider is already in dB internally */
>static DECLARE_TLV_DB_SCALE(snd_cx18_mixer_tv_vol_db_scale, -9600, 100,
>0);
Really? Did you try to compile the file after this patch?
http://git.linuxtv.org/cgit.cgi/media_tree.git/tree/drivers/media/pci/cx18/cx18-alsa-mixer.c#n143
They are referenced later in the same file.
This is only half a fix.
You can either remove the cx18-alsa-mixer.* files and from the build system,
or even better,you can hook-up and initialize these callbacks with alsa so alsa
mixer controls show up for cx18. :)
-Andy
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
