The three gpio's used by this driver are stored in an array of pointers.
This doesn't add much besides cleanups in a loop. In fact, it makes most
of the usage sites harder to read. Unroll the loop, and live with the
fact that cleanups become slightly larger.
Signed-off-by: Frans Klaver <frans.kla...@xsens.com>
---
drivers/power/reset/ltc2952-poweroff.c | 86 +++++++++++++++-------------------
1 file changed, 38 insertions(+), 48 deletions(-)
diff --git a/drivers/power/reset/ltc2952-poweroff.c
b/drivers/power/reset/ltc2952-poweroff.c
index 2c11316..fc583e0 100644
--- a/drivers/power/reset/ltc2952-poweroff.c
+++ b/drivers/power/reset/ltc2952-poweroff.c
@@ -72,21 +72,14 @@ struct ltc2952_poweroff_data {
struct device *dev;
- /**
- * 0: trigger
- * 1: watchdog
- * 2: kill
- */
- struct gpio_desc *gpio[3];
+ struct gpio_desc *gpio_trigger;
+ struct gpio_desc *gpio_watchdog;
+ struct gpio_desc *gpio_kill;
};
static int ltc2952_poweroff_panic;
static struct ltc2952_poweroff_data *ltc2952_data;
-#define POWERPATH_IO_TRIGGER 0
-#define POWERPATH_IO_WATCHDOG 1
-#define POWERPATH_IO_KILL 2
-
/**
* ltc2952_poweroff_timer_wde - Timer callback
* Toggles the watchdog reset signal each wde_interval
@@ -105,8 +98,8 @@ static enum hrtimer_restart
ltc2952_poweroff_timer_wde(struct hrtimer *timer)
if (ltc2952_poweroff_panic)
return HRTIMER_NORESTART;
- state = gpiod_get_value(ltc2952_data->gpio[POWERPATH_IO_WATCHDOG]);
- gpiod_set_value(ltc2952_data->gpio[POWERPATH_IO_WATCHDOG], !state);
+ state = gpiod_get_value(ltc2952_data->gpio_watchdog);
+ gpiod_set_value(ltc2952_data->gpio_watchdog, !state);
now = hrtimer_cb_get_time(timer);
overruns = hrtimer_forward(timer, now, ltc2952_data->wde_interval);
@@ -120,7 +113,7 @@ static enum hrtimer_restart ltc2952_poweroff_timer_trigger(
int ret;
ret = hrtimer_start(<c2952_data->timer_wde,
- ltc2952_data->wde_interval, HRTIMER_MODE_REL);
+ ltc2952_data->wde_interval, HRTIMER_MODE_REL);
if (ret) {
dev_err(ltc2952_data->dev, "unable to start the timer\n");
@@ -180,7 +173,7 @@ irq_ok:
static void ltc2952_poweroff_kill(void)
{
- gpiod_set_value(ltc2952_data->gpio[POWERPATH_IO_KILL], 1);
+ gpiod_set_value(ltc2952_data->gpio_kill, 1);
}
static int ltc2952_poweroff_suspend(struct platform_device *pdev,
@@ -196,11 +189,6 @@ static int ltc2952_poweroff_resume(struct platform_device
*pdev)
static void ltc2952_poweroff_default(struct ltc2952_poweroff_data *data)
{
- unsigned int i;
-
- for (i = 0; i < ARRAY_SIZE(data->gpio); i++)
- data->gpio[i] = NULL;
-
data->wde_interval = ktime_set(0, 300L*1E6L);
data->trigger_delay = ktime_set(2, 500L*1E6L);
@@ -214,45 +202,46 @@ static void ltc2952_poweroff_default(struct
ltc2952_poweroff_data *data)
static int ltc2952_poweroff_init(struct platform_device *pdev)
{
int ret, virq;
- unsigned int i;
struct ltc2952_poweroff_data *data;
- static char *name[] = {
- "trigger",
- "watchdog",
- "kill",
- NULL
- };
-
data = ltc2952_data;
ltc2952_poweroff_default(ltc2952_data);
- for (i = 0; i < ARRAY_SIZE(ltc2952_data->gpio); i++) {
- ltc2952_data->gpio[i] = gpiod_get(&pdev->dev, name[i]);
+ ltc2952_data->gpio_watchdog = gpiod_get(&pdev->dev, "watchdog");
+ if (IS_ERR(ltc2952_data->gpio_watchdog)) {
+ ret = PTR_ERR(ltc2952_data->gpio_watchdog);
+ dev_err(&pdev->dev, "unable to claim gpio \"watchdog\"\n");
+ return ret;
+ }
- if (IS_ERR(ltc2952_data->gpio[i])) {
- ret = PTR_ERR(ltc2952_data->gpio[i]);
- dev_err(&pdev->dev,
- "unable to claim the following gpio: %s\n",
- name[i]);
- goto err_io;
- }
+ ltc2952_data->gpio_kill = gpiod_get(&pdev->dev, "kill");
+ if (IS_ERR(ltc2952_data->gpio_kill)) {
+ ret = PTR_ERR(ltc2952_data->gpio_kill);
+ dev_err(&pdev->dev, "unable to claim gpio \"kill\"\n");
+ goto err_kill;
+ }
+
+ ltc2952_data->gpio_trigger = gpiod_get(&pdev->dev, "trigger");
+ if (IS_ERR(ltc2952_data->gpio_trigger)) {
+ ret = PTR_ERR(ltc2952_data->gpio_trigger);
+ dev_err(&pdev->dev, "unable to claim gpio \"trigger\"\n");
+ goto err_trigger;
}
ret = gpiod_direction_output(
- ltc2952_data->gpio[POWERPATH_IO_WATCHDOG], 0);
+ ltc2952_data->gpio_watchdog, 0);
if (ret) {
dev_err(&pdev->dev, "unable to use watchdog-gpio as output\n");
goto err_io;
}
- ret = gpiod_direction_output(ltc2952_data->gpio[POWERPATH_IO_KILL], 0);
+ ret = gpiod_direction_output(ltc2952_data->gpio_kill, 0);
if (ret) {
dev_err(&pdev->dev, "unable to use kill-gpio as output\n");
goto err_io;
}
- virq = gpiod_to_irq(ltc2952_data->gpio[POWERPATH_IO_TRIGGER]);
+ virq = gpiod_to_irq(ltc2952_data->gpio_trigger);
if (virq < 0) {
dev_err(&pdev->dev, "cannot map GPIO as interrupt");
goto err_io;
@@ -272,9 +261,11 @@ static int ltc2952_poweroff_init(struct platform_device
*pdev)
return 0;
err_io:
- for (i = 0; i < ARRAY_SIZE(ltc2952_data->gpio); i++)
- if (ltc2952_data->gpio[i])
- gpiod_put(ltc2952_data->gpio[i]);
+ gpiod_put(ltc2952_data->gpio_trigger);
+err_trigger:
+ gpiod_put(ltc2952_data->gpio_kill);
+err_kill:
+ gpiod_put(ltc2952_data->gpio_watchdog);
return ret;
}
@@ -308,14 +299,13 @@ static int ltc2952_poweroff_probe(struct platform_device
*pdev)
static int ltc2952_poweroff_remove(struct platform_device *pdev)
{
- unsigned int i;
-
pm_power_off = NULL;
- if (ltc2952_data)
- for (i = 0; i < ARRAY_SIZE(ltc2952_data->gpio); i++)
- gpiod_put(ltc2952_data->gpio[i]);
-
+ if (ltc2952_data) {
+ gpiod_put(ltc2952_data->gpio_trigger);
+ gpiod_put(ltc2952_data->gpio_watchdog);
+ gpiod_put(ltc2952_data->gpio_kill);
+ }
return 0;
}
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
