Am Montag, 19. Januar 2015, 18:08:08 schrieb Romain Perier:
> Currently, dwmac-rk uses a custom propety "phy_regulator" to get the name of
> the right regulator to use to power on or power off the phy. This commit
> converts the driver to use phy-supply devicetree property and the
> corresponding API, it cleans the code a bit and make it simpler to
> maintain.
>
> Signed-off-by: Romain Perier <[email protected]>
I don't see updated binding documentation in here.
Secondly I think patch4 which changes the property in the evb-rk808 could be
in here. The change is simple enough and would keep it bisectable without
needing transistional patches.
And there is the one warning down below.
> ---
> drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c | 61
> ++++++++------------------ 1 file changed, 19 insertions(+), 42
> deletions(-)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
> b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c index 06e1637..8a8091c
> 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
> @@ -32,7 +32,7 @@
> struct rk_priv_data {
> struct platform_device *pdev;
> int phy_iface;
> - char regulator[32];
> + struct regulator *regulator;
>
> bool clk_enabled;
> bool clock_input;
> @@ -287,46 +287,25 @@ static int gmac_clk_enable(struct rk_priv_data
> *bsp_priv, bool enable)
>
> static int phy_power_on(struct rk_priv_data *bsp_priv, bool enable)
> {
> - struct regulator *ldo;
> - char *ldostr = bsp_priv->regulator;
> + struct regulator *ldo = bsp_priv->regulator;
> int ret;
> struct device *dev = &bsp_priv->pdev->dev;
>
> - if (!ldostr) {
> - dev_err(dev, "%s: no ldo found\n", __func__);
> + if (!ldo) {
> + dev_err(dev, "%s: no regulator found\n", __func__);
> return -1;
> }
>
> - ldo = regulator_get(NULL, ldostr);
> - if (!ldo) {
> - dev_err(dev, "\n%s get ldo %s failed\n", __func__, ldostr);
> + if (enable) {
> + ret = regulator_enable(ldo);
> + if (ret)
> + dev_err(dev, "%s: fail to enable phy-supply\n",
> + __func__);
> } else {
> - if (enable) {
> - if (!regulator_is_enabled(ldo)) {
> - ret = regulator_enable(ldo);
> - if (ret != 0)
> - dev_err(dev, "%s: fail to enable %s\n",
> - __func__, ldostr);
> - else
> - dev_info(dev, "turn on ldo done.\n");
> - } else {
> - dev_warn(dev, "%s is enabled before enable",
> - ldostr);
> - }
> - } else {
> - if (regulator_is_enabled(ldo)) {
> - ret = regulator_disable(ldo);
> - if (ret != 0)
> - dev_err(dev, "%s: fail to disable %s\n",
> - __func__, ldostr);
> - else
> - dev_info(dev, "turn off ldo done.\n");
> - } else {
> - dev_warn(dev, "%s is disabled before disable",
> - ldostr);
> - }
> - }
> - regulator_put(ldo);
> + ret = regulator_disable(ldo);
> + if (ret)
> + dev_err(dev, "%s: fail to disable phy-supply\n",
> + __func__);
> }
>
> return 0;
> @@ -346,14 +325,12 @@ static void *rk_gmac_setup(struct platform_device
> *pdev)
>
> bsp_priv->phy_iface = of_get_phy_mode(dev->of_node);
>
> - ret = of_property_read_string(dev->of_node, "phy_regulator", &strings);
> - if (ret) {
> - dev_warn(dev, "%s: Can not read property: phy_regulator.\n",
> - __func__);
> - } else {
> - dev_info(dev, "%s: PHY power controlled by regulator(%s).\n",
> - __func__, strings);
> - strcpy(bsp_priv->regulator, strings);
> + bsp_priv->regulator = devm_regulator_get_optional(dev, "phy");
> + if (IS_ERR(bsp_priv->regulator)) {
> + if (PTR_ERR(bsp_priv->regulator) == -EPROBE_DEFER)
> + return -EPROBE_DEFER;
this should be return ERR_PTR(-EPROBE_DEFER) and produces a warning in its
current state
> + dev_err(dev, "no regulator found\n");
> + bsp_priv->regulator = NULL;
> }
>
> ret = of_property_read_string(dev->of_node, "clock_in_out", &strings);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
