On Mon, Jan 19, 2015 at 08:40:25PM +0100, Paul Bolle wrote:
> The Kconfig symbol DEBUG_MVEBU_UART_ALTERNATE was renamed to
> DEBUG_MVEBU_UART0_ALTERNATE. And the symbol DEBUG_MVEBU_UART1_ALTERNATE
> was added to allow UART1 as a DEBUG_LL target. Make the comment at the
> top of this DTS reflect those changes.
>
> Since we're touching this DTS add comments to show which blocks describe
> UART0 and UART1.
>
> Signed-off-by: Paul Bolle <[email protected]>
Hi Paul
Thanks for this. I have added it to mvebu/dt.
Andrew
> ---
> Created on top of next-20150119. Untested! Note that I know nothing
> about this board or about DT source files, so all changes are nothing
> more than guesses.
>
> arch/arm/boot/dts/armada-xp-axpwifiap.dts | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts
> b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
> index ca0200e20751..28174ab019f9 100644
> --- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts
> +++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
> @@ -3,8 +3,8 @@
> *
> * Note: this board is shipped with a new generation boot loader that
> * remaps internal registers at 0xf1000000. Therefore, if earlyprintk
> - * is used, the CONFIG_DEBUG_MVEBU_UART_ALTERNATE option should be
> - * used.
> + * is used, the CONFIG_DEBUG_MVEBU_UART0_ALTERNATE option or the
> + * CONFIG_DEBUG_MVEBU_UART1_ALTERNATE option should be used.
> *
> * Copyright (C) 2013 Marvell
> *
> @@ -60,10 +60,12 @@
> };
>
> internal-regs {
> + /* UART0 */
> serial@12000 {
> status = "okay";
> };
>
> + /* UART1 */
> serial@12100 {
> status = "okay";
> };
> --
> 1.9.3
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
