Maxime, Can you ping these up please?
> The Synchronous Serial Controller is used to provide SPI. > > These are the ports which are located on the Stand-By Controller (SBC). > > Signed-off-by: Lee Jones <[email protected]> > --- > arch/arm/boot/dts/stih407.dtsi | 31 +++++++++++++++++++++++++++++++ > 1 file changed, 31 insertions(+) > > diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi > index 90bc090..80e2407 100644 > --- a/arch/arm/boot/dts/stih407.dtsi > +++ b/arch/arm/boot/dts/stih407.dtsi > @@ -329,5 +329,36 @@ > > status = "disabled"; > }; > + > + /* SBC SSC */ > + spi@9540000 { > + compatible = "st,comms-ssc4-spi"; > + reg = <0x9540000 0x110>; > + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clk_sysin>; > + clock-names = "ssc"; > + > + status = "disabled"; > + }; > + > + spi@9541000 { > + compatible = "st,comms-ssc4-spi"; > + reg = <0x9541000 0x110>; > + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clk_sysin>; > + clock-names = "ssc"; > + > + status = "disabled"; > + }; > + > + spi@9542000 { > + compatible = "st,comms-ssc4-spi"; > + reg = <0x9542000 0x110>; > + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clk_sysin>; > + clock-names = "ssc"; > + > + status = "disabled"; > + }; > }; > }; -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
