Expose the requested load directly to the regulator implementation for hardware that does not support the normal enum based set_mode().
Signed-off-by: Bjorn Andersson <[email protected]> --- drivers/regulator/core.c | 39 ++++++++++++++++++++++++--------------- include/linux/regulator/driver.h | 3 +++ 2 files changed, 27 insertions(+), 15 deletions(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 27fb349..5bf22ee 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -672,10 +672,12 @@ static int drms_uA_update(struct regulator_dev *rdev) if (err < 0) return 0; - if (!rdev->desc->ops->get_optimum_mode) + if (!rdev->desc->ops->get_optimum_mode && + !rdev->desc->ops->set_load) return 0; - if (!rdev->desc->ops->set_mode) + if (!rdev->desc->ops->set_mode && + !rdev->desc->ops->set_load) return -EINVAL; /* get output voltage */ @@ -700,22 +702,29 @@ static int drms_uA_update(struct regulator_dev *rdev) list_for_each_entry(sibling, &rdev->consumer_list, list) current_uA += sibling->uA_load; - /* now get the optimum mode for our new total regulator load */ - mode = rdev->desc->ops->get_optimum_mode(rdev, input_uV, - output_uV, current_uA); + if (rdev->desc->ops->set_load) { + /* set the optimum mode for our new total regulator load */ + err = rdev->desc->ops->set_load(rdev, current_uA); + if (err < 0) + rdev_err(rdev, "failed to set load %d\n", current_uA); + } else { + /* now get the optimum mode for our new total regulator load */ + mode = rdev->desc->ops->get_optimum_mode(rdev, input_uV, + output_uV, current_uA); + + /* check the new mode is allowed */ + err = regulator_mode_constrain(rdev, &mode); + if (err < 0) { + rdev_err(rdev, "failed to get optimum mode @ %d uA %d -> %d uV\n", + current_uA, input_uV, output_uV); + return err; + } - /* check the new mode is allowed */ - err = regulator_mode_constrain(rdev, &mode); - if (err < 0) { - rdev_err(rdev, "failed to get optimum mode @ %d uA %d -> %d uV\n", - current_uA, input_uV, output_uV); - return err; + err = rdev->desc->ops->set_mode(rdev, mode); + if (err < 0) + rdev_err(rdev, "failed to set optimum mode %x\n", mode); } - err = rdev->desc->ops->set_mode(rdev, mode); - if (err < 0) - rdev_err(rdev, "failed to set optimum mode %x\n", mode); - return err; } diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 5f1e9ca..8a4d2e7 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -97,6 +97,7 @@ struct regulator_linear_range { * REGULATOR_STATUS value (or negative errno) * @get_optimum_mode: Get the most efficient operating mode for the regulator * when running with the specified parameters. + * @set_load: Set the load for the regulator. * * @set_bypass: Set the regulator in bypass mode. * @get_bypass: Get the regulator bypass mode state. @@ -166,6 +167,8 @@ struct regulator_ops { /* get most efficient regulator operating mode for load */ unsigned int (*get_optimum_mode) (struct regulator_dev *, int input_uV, int output_uV, int load_uA); + /* set the load on the regulator */ + int (*set_load)(struct regulator_dev *, int load_uA); /* control and report on bypass mode */ int (*set_bypass)(struct regulator_dev *dev, bool enable); -- 1.8.2.2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
