On 01/23/15 16:54, Bjorn Andersson wrote:
> +
> +static int pm8941_wled_set(struct led_classdev *cdev,
> +                        enum led_brightness value)
> +{
> +     struct pm8941_wled *wled;
> +     u8 ctrl = 0;
> +     u16 val;
> +     int rc;
> +     int i;
> +
> +     wled = container_of(cdev, struct pm8941_wled, cdev);
> +
> +     if (value != 0)
> +             ctrl = PM8941_WLED_REG_MOD_EN_BIT;
> +
> +     val = value * PM8941_WLED_REG_VAL_MAX / LED_FULL;
> +
> +     rc = regmap_update_bits(wled->regmap,
> +                     wled->addr + PM8941_WLED_REG_MOD_EN,
> +                     PM8941_WLED_REG_MOD_EN_MASK, ctrl);
> +     if (rc)
> +             return rc;
> +
> +     for (i = 0; i < wled->cfg.num_strings; ++i) {
> +             u8 v[2] = { val & 0xff, (val >> 8) & 0xf };
> +
> +             rc = regmap_bulk_write(wled->regmap,
> +                             wled->addr + PM8941_WLED_REG_VAL_BASE + 2 * i,
> +                             v, 2);
> +             if (rc)
> +                     return rc;
> +     }
> +
> +     rc = regmap_update_bits(wled->regmap,
> +                     wled->addr + PM8941_WLED_REG_SYNC,
> +                     PM8941_WLED_REG_SYNC_MASK, PM8941_WLED_REG_SYNC_ALL);
> +     if (rc)
> +             return rc;
> +
> +     rc = regmap_update_bits(wled->regmap,
> +                     wled->addr + PM8941_WLED_REG_SYNC,
> +                     PM8941_WLED_REG_SYNC_MASK, PM8941_WLED_REG_SYNC_CLEAR);
> +     return rc;
> +}

This doesn't seem to do anything for the OVP spike mentioned in this
patch[1]. Do you see that problem on your device? I imagine the PMIC is
the same.

[1]
https://www.codeaurora.org/cgit/quic/la/kernel/msm/commit/?id=fef9e15072562f0f28dc7066dcdd69388df81ed3

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to