Commit 8c3166f5d74b7936d29dc44f778e759c1b9fb43a (ARM: DT: apq8064: Add i2c
device nodes)
added a new gsbi2 node which is totally wrong for 2 reasons.
First the address range is not something which maps to gsbi2 according
to datasheet and 3.4 sources.
Secondly 8064 devices do not use gsbi2 for i2c according to 3.4 kernel sources.
Removing this node as this node would never get tested.
Signed-off-by: Srinivas Kandagatla <srinivas.kandaga...@linaro.org>
---
arch/arm/boot/dts/qcom-apq8064.dtsi | 20 --------------------
1 file changed, 20 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi
b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 63edafc..ba44f30 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -201,26 +201,6 @@
};
};
- gsbi2: gsbi@12480000 {
- status = "disabled";
- compatible = "qcom,gsbi-v1.0.0";
- reg = <0x12480000 0x100>;
- clocks = <&gcc GSBI2_H_CLK>;
- clock-names = "iface";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- i2c2: i2c@124a0000 {
- compatible = "qcom,i2c-qup-v1.1.1";
- reg = <0x124a0000 0x1000>;
- interrupts = <0 196 IRQ_TYPE_NONE>;
- clocks = <&gcc GSBI2_QUP_CLK>, <&gcc
GSBI2_H_CLK>;
- clock-names = "core", "iface";
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
gsbi7: gsbi@16600000 {
status = "disabled";
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
