from dmesg: Linux version 2.6.13-rc3-mm1 ([EMAIL PROTECTED]) (gcc version 4.0.1 (Debian 4.0.1-2)) #4 Thu Jul 21 19:09:25 CEST 2005 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 NFORCE-CK804: chipset revision 162 NFORCE-CK804: not 100% native mode: will probe irqs later NFORCE-CK804: BIOS didn't set cable bits correctly. Enabling workaround. NFORCE-CK804: 0000:00:06.0 (rev a2) UDMA133 controller ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: WDC WD2000JB-32EVA0, ATA DISK drive hdb: _NEC DVD_RW ND-3500AG, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
I see a lot of these errors: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x84 { DriveStatusError BadCRC } ide: failed opcode was: unknown CPU0 0: 204642 IO-APIC-edge timer 1: 3710 IO-APIC-edge i8042 8: 0 IO-APIC-edge rtc 9: 0 IO-APIC-level acpi 12: 106 IO-APIC-edge i8042 14: 30571 IO-APIC-edge ide0 15: 30529 IO-APIC-edge ide1 50: 0 IO-APIC-level ohci_hcd:usb2 58: 9407 IO-APIC-level libata 66: 54 IO-APIC-level libata, NVidia CK804 74: 61503 IO-APIC-level libata 82: 0 IO-APIC-level ehci_hcd:usb1 225: 56249 IO-APIC-level ohci1394, fast 233: 0 IO-APIC-level SysKonnect SK-98xx NMI: 483 LOC: 204607 ERR: 0 MIS: 0 Is there any way to detect what exactly is causing this? To the best of my knowledge, the disk works fine - even my raid1 set on this disk isn't impacted, the speed stays ok, I'm wondering if there's a command being sent the disk (or the controller) doesn't know how to handle. smartctl isn't active, BTW. Thanks, Jurriaan -- And the gosts of hope walk silent halls At the death of the promised land All is gone, all is gone But these changing winds can turn cold and hostile New Model Army Debian (Unstable) GNU/Linux 2.6.13-rc3-mm1 5149 bogomips load 0.97 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/