On 03/12/2015 01:07 PM, Alexandre Belloni wrote:
Remove the mach/hardware dependency to prepare the driver for multiplatform
support.
Also switch from setup_irq() to request_irq()
Signed-off-by: Alexandre Belloni <[email protected]>
---
drivers/clocksource/timer-atmel-st.c | 21 +++++++++------------
1 file changed, 9 insertions(+), 12 deletions(-)
diff --git a/drivers/clocksource/timer-atmel-st.c
b/drivers/clocksource/timer-atmel-st.c
index 674ef2519d6b..91d6cbb7a56b 100644
--- a/drivers/clocksource/timer-atmel-st.c
+++ b/drivers/clocksource/timer-atmel-st.c
@@ -31,13 +31,12 @@
#include <asm/mach/time.h>
Couldn't the header above be removed ?
Other than that:
Acked-by: Daniel Lezcano <[email protected]>
-#include <mach/hardware.h>
-
static unsigned long last_crtr;
static u32 irqmask;
static struct clock_event_device clkevt;
static struct regmap *regmap_st;
+#define AT91_SLOW_CLOCK 32768
#define RM9200_TIMER_LATCH ((AT91_SLOW_CLOCK + HZ/2) / HZ)
/*
@@ -96,13 +95,6 @@ static irqreturn_t at91rm9200_timer_interrupt(int irq, void
*dev_id)
return IRQ_NONE;
}
-static struct irqaction at91rm9200_timer_irq = {
- .name = "at91_tick",
- .flags = IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = at91rm9200_timer_interrupt,
- .irq = NR_IRQS_LEGACY + AT91_ID_SYS,
-};
-
static cycle_t read_clk32k(struct clocksource *cs)
{
return read_CRTR();
@@ -193,6 +185,7 @@ static struct clock_event_device clkevt = {
static void __init atmel_st_timer_init(struct device_node *node)
{
unsigned int val;
+ int irq, ret;
regmap_st = syscon_node_to_regmap(node);
if (IS_ERR(regmap_st))
@@ -204,12 +197,16 @@ static void __init atmel_st_timer_init(struct device_node
*node)
regmap_read(regmap_st, AT91_ST_SR, &val);
/* Get the interrupts property */
- at91rm9200_timer_irq.irq = irq_of_parse_and_map(node, 0);
- if (!at91rm9200_timer_irq.irq)
+ irq = irq_of_parse_and_map(node, 0);
+ if (!irq)
panic(pr_fmt("Unable to get IRQ from DT\n"));
/* Make IRQs happen for the system timer */
- setup_irq(at91rm9200_timer_irq.irq, &at91rm9200_timer_irq);
+ ret = request_irq(irq, at91rm9200_timer_interrupt,
+ IRQF_SHARED | IRQF_TIMER | IRQF_IRQPOLL,
+ "at91_tick", regmap_st);
+ if (ret)
+ panic(pr_fmt("Unable to setup IRQ\n"));
/* The 32KiHz "Slow Clock" (tick every 30517.58 nanoseconds) is used
* directly for the clocksource and all clockevents, after adjusting
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
