Hi Bartlomiej,

I tested this patch on Exynos3250-based Gear2 board.
Thanks for your effor to solve this issue.

Tested-by: Chanwoo Choi <[email protected]>

Best Regards,
Chanwoo Choi

On 03/19/2015 01:00 AM, Bartlomiej Zolnierkiewicz wrote:
> CPU1 hotplug may hang when AFTR is used.  Fix it by:
> - setting AUTOWAKEUP_EN bit in ARM_COREx_CONFIGURATION register in
>   exynos_cpu_power_up()
> - not clearing reserved bits of ARM_COREx_CONFIGURATION register in
>   exynos_cpu_power_down()
> - waiting while an undocumented register 0x0908 becomes non-zero in
>   exynos_core_restart()
> - using dsb_sev() instead of IPI in exynos_boot_secondary() on
>   Exynos3250
> 
> This patch also fixes hotplug issues during resume from S2R:
> $ echo mem > /sys/power/state
> [  156.517266] Disabling non-boot CPUs ...
> [  156.517781] IRQ18 no longer affine to CPU1
> [  156.518043] CPU1: shutdown
> [  156.544718] Enabling non-boot CPUs ...
> [  156.554925] CPU1: Software reset
> [  158.552631] CPU1: failed to come online
> [  158.552753] Error taking CPU1 up: -5
> 
> Cc: Daniel Lezcano <[email protected]>
> Signed-off-by: Chanwoo Choi <[email protected]>
> Signed-off-by: Krzysztof Kozlowski <[email protected]>
> Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
> Reviewed-by: Krzysztof Kozlowski <[email protected]>
> Tested-by: Krzysztof Kozlowski <[email protected]>
> Acked-by: Kyungmin Park <[email protected]>
> ---
>  arch/arm/mach-exynos/platsmp.c  | 23 ++++++++++++++++++++---
>  arch/arm/mach-exynos/regs-pmu.h |  2 ++
>  2 files changed, 22 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
> index d2e9f12..ebd135b 100644
> --- a/arch/arm/mach-exynos/platsmp.c
> +++ b/arch/arm/mach-exynos/platsmp.c
> @@ -126,6 +126,8 @@ static inline void platform_do_lowpower(unsigned int cpu, 
> int *spurious)
>   */
>  void exynos_cpu_power_down(int cpu)
>  {
> +     u32 core_conf;
> +
>       if (cpu == 0 && (soc_is_exynos5420() || soc_is_exynos5800())) {
>               /*
>                * Bypass power down for CPU0 during suspend. Check for
> @@ -137,7 +139,10 @@ void exynos_cpu_power_down(int cpu)
>               if (!(val & S5P_CORE_LOCAL_PWR_EN))
>                       return;
>       }
> -     pmu_raw_writel(0, EXYNOS_ARM_CORE_CONFIGURATION(cpu));
> +
> +     core_conf = pmu_raw_readl(EXYNOS_ARM_CORE_CONFIGURATION(cpu));
> +     core_conf &= ~S5P_CORE_LOCAL_PWR_EN;
> +     pmu_raw_writel(core_conf, EXYNOS_ARM_CORE_CONFIGURATION(cpu));
>  }
>  
>  /**
> @@ -148,7 +153,12 @@ void exynos_cpu_power_down(int cpu)
>   */
>  void exynos_cpu_power_up(int cpu)
>  {
> -     pmu_raw_writel(S5P_CORE_LOCAL_PWR_EN,
> +     u32 core_conf = S5P_CORE_LOCAL_PWR_EN;
> +
> +     if (soc_is_exynos3250())
> +             core_conf |= S5P_CORE_AUTOWAKEUP_EN;
> +
> +     pmu_raw_writel(core_conf,
>                       EXYNOS_ARM_CORE_CONFIGURATION(cpu));
>  }
>  
> @@ -226,6 +236,10 @@ static void exynos_core_restart(u32 core_id)
>       if (!of_machine_is_compatible("samsung,exynos3250"))
>               return;
>  
> +     while (!pmu_raw_readl(S5P_PMU_SPARE2))
> +             udelay(10);
> +     udelay(10);
> +
>       val = pmu_raw_readl(EXYNOS_ARM_CORE_STATUS(core_id));
>       val |= S5P_CORE_WAKEUP_FROM_LOCAL_CFG;
>       pmu_raw_writel(val, EXYNOS_ARM_CORE_STATUS(core_id));
> @@ -346,7 +360,10 @@ static int exynos_boot_secondary(unsigned int cpu, 
> struct task_struct *idle)
>  
>               call_firmware_op(cpu_boot, core_id);
>  
> -             arch_send_wakeup_ipi_mask(cpumask_of(cpu));
> +             if (soc_is_exynos3250())
> +                     dsb_sev();
> +             else
> +                     arch_send_wakeup_ipi_mask(cpumask_of(cpu));
>  
>               if (pen_release == -1)
>                       break;
> diff --git a/arch/arm/mach-exynos/regs-pmu.h b/arch/arm/mach-exynos/regs-pmu.h
> index eb461e1..84ddce1 100644
> --- a/arch/arm/mach-exynos/regs-pmu.h
> +++ b/arch/arm/mach-exynos/regs-pmu.h
> @@ -49,6 +49,7 @@
>  #define S5P_INFORM5                          0x0814
>  #define S5P_INFORM6                          0x0818
>  #define S5P_INFORM7                          0x081C
> +#define S5P_PMU_SPARE2                               0x0908
>  #define S5P_PMU_SPARE3                               0x090C
>  
>  #define EXYNOS_IROM_DATA2                    0x0988
> @@ -182,6 +183,7 @@
>  
>  #define S5P_CORE_LOCAL_PWR_EN                        0x3
>  #define S5P_CORE_WAKEUP_FROM_LOCAL_CFG               (0x3 << 8)
> +#define S5P_CORE_AUTOWAKEUP_EN                       (1 << 31)
>  
>  /* Only for EXYNOS4210 */
>  #define S5P_CMU_CLKSTOP_LCD1_LOWPWR  0x1154
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to