Hi Neil, Am 18.03.2015 um 06:58 schrieb NeilBrown <n...@brown.name>:
> Hi again, > here is version 3 of support for tty-slaves. > > This version introduces a new bus-type for tty-slaves, Hm. I am still not convinced that a tty is a „bus“ and that this is a solution for a wide-spread problem. > and causes > a tty-slave device to appear in /sys/devices between the uart and the > tty. > It effectively intercepts and calls from the tty to the uart (i.e. any > tty_operations) and applies extra functionality at that point. > > Currently the only driver intercepts open and close. > It powers on the device on open, and powers off at last-close. That is what the missing piece in Linux is to make the w2sg0004 chip work. > > Power can be controlled by a regulator or by toggling a GPIO. I think such a GPIO logic has nothing to do with serial and should be left over to the regulator logic, i.e. we need a special regulator-w2sg0004 driver. So I suggest to remove the GPIO logic from your drivers/tty/slave/serial-power-manager.c And then you can even get rid of adding a chip specific „compatible“ entry for the subnodes. > > I think I've incorporated most of the feed back I received from > previous versions, but if I missed something - I apologize. If > this approach is structurally acceptable then I can fix up all the > smaller issues. As said I would prefer that the w2sg0004 driver is just a separate „regulator“ driver as we had proposed before. Nikolaus > > Thanks for your review, > NeilBrown > > > --- > > NeilBrown (3): > TTY: use class_find_device to find port in uart_suspend/resume. > TTY: add support for tty_slave devices. > tty/slaves: add a driver to power on/off UART attached devices. > > > .../bindings/tty_slave/wi2wi,w2cbw003.txt | 19 + > .../bindings/tty_slave/wi2wi,w2sg0004.txt | 37 + > .../devicetree/bindings/vendor-prefixes.txt | 1 > drivers/tty/Kconfig | 1 > drivers/tty/Makefile | 1 > drivers/tty/serial/serial_core.c | 21 - > drivers/tty/slave/Kconfig | 21 + > drivers/tty/slave/Makefile | 4 > drivers/tty/slave/serial-power-manager.c | 510 ++++++++++++++++++++ > drivers/tty/slave/tty_slave_core.c | 136 +++++ > drivers/tty/tty_io.c | 60 ++ > include/linux/tty.h | 2 > include/linux/tty_slave.h | 26 + > 13 files changed, 813 insertions(+), 26 deletions(-) > create mode 100644 > Documentation/devicetree/bindings/tty_slave/wi2wi,w2cbw003.txt > create mode 100644 > Documentation/devicetree/bindings/tty_slave/wi2wi,w2sg0004.txt > create mode 100644 drivers/tty/slave/Kconfig > create mode 100644 drivers/tty/slave/Makefile > create mode 100644 drivers/tty/slave/serial-power-manager.c > create mode 100644 drivers/tty/slave/tty_slave_core.c > create mode 100644 include/linux/tty_slave.h > > -- > Signature > > _______________________________________________ > Gta04-owner mailing list > gta04-ow...@goldelico.com > http://lists.goldelico.com/mailman/listinfo.cgi/gta04-owner -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
