the lcd type as defined in the Kconfig is not matching in the code. as a result the rs, rw and en pins were getting interchanged. Kconfig defines the value of PANEL_LCD to be 1 if we select custom configuration but in the code LCD_TYPE_CUSTOM is defined as 5.
my hardware is LCD_TYPE_CUSTOM, but the pins were assigned to it as pins of LCD_TYPE_OLD, and it was not working. Now values are corrected with referenece to the values defined in Kconfig and it is working. checked on JHD204A lcd with LCD_TYPE_CUSTOM configuration. Signed-off-by: Sudip Mukherjee <su...@vectorindia.org> --- I traced the code till 2.6.32.2 and it was same problem in lcd_init(), it can work only if we have configured for custom lcd type with connections similar to the connections of LCD_TYPE_OLD. drivers/staging/panel/panel.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/staging/panel/panel.c b/drivers/staging/panel/panel.c index 16fee49..4ffff2e 100644 --- a/drivers/staging/panel/panel.c +++ b/drivers/staging/panel/panel.c @@ -314,11 +314,11 @@ static unsigned char lcd_bits[LCD_PORTS][LCD_BITS][BIT_STATES]; * LCD types */ #define LCD_TYPE_NONE 0 -#define LCD_TYPE_OLD 1 -#define LCD_TYPE_KS0074 2 -#define LCD_TYPE_HANTRONIX 3 -#define LCD_TYPE_NEXCOM 4 -#define LCD_TYPE_CUSTOM 5 +#define LCD_TYPE_CUSTOM 1 +#define LCD_TYPE_OLD 2 +#define LCD_TYPE_KS0074 3 +#define LCD_TYPE_HANTRONIX 4 +#define LCD_TYPE_NEXCOM 5 /* * keypad types -- 1.8.1.2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
