For the series: Acked-by: Olivier Clergeaud <[email protected]>
-----Original Message----- From: Lee Jones [mailto:[email protected]] Sent: mercredi 18 mars 2015 18:21 To: [email protected]; [email protected]; [email protected]; [email protected] Cc: [email protected]; [email protected] Subject: [PATCH v2 0/6] pinctrl: st: Fix disparity between Pinctrl & GPIO in /sysfs Version 2: Fixed up Maxime's review comments - Reduce size of char array - Use snprintf() Applied Maxime's Acks ST's hardware differentiates between GPIO mode and Pinctrl alternate functions. When a pin is in GPIO mode, there are dedicated registers to set and obtain direction status. However, If a pin's alternate function is in use then the direction is set and status is derived from a bunch of syscon registers. The issue is; until now there was a lack of parity between the two. Karim BEN BELGACEM (1): ARM: STi: DT: STiH407: Fix retime pin mask for PIO5 and PIO35 Lee Jones (5): pinctrl: st: Introduce a 'get pin function' call pinctrl: st: Move st_get_pio_control() further up the source file pinctrl: st: Supply a GPIO get_direction() call-back pinctrl: st: Show correct pin direction -- even when in GPIO mode pinctrl: st: Display pin's function when printing pinctrl debug information arch/arm/boot/dts/stih407-pinctrl.dtsi | 2 + drivers/pinctrl/pinctrl-st.c | 83 +++++++++++++++++++++++++++++----- 2 files changed, 73 insertions(+), 12 deletions(-) -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
