Ok so I have completed the rework to the second of the two patch chains on this and pulled them back together into one series.
Note the main difference is I have pulled a couple patches from the second series to the start of the chain. This is because of patch 3 which is a bug fix for 5102 I have discovered whilst working through this better system suspend support stuff. Thanks, Charles Charles Keepax (9): mfd: arizona: Use devres to manage reset GPIO mfd: arizona: Factor out hard reset into helper functions mfd: wm5102: Ensure we always boot the device fully mfd: arizona: Factor out SYSCLK enable from wm5102 hardware patch mfd: wm5110: Add register patch required for low power sleep regulator: arizona-ldo1: Add additional supported voltage mfd: wm5110: Set DCVDD voltage to 1.175V before entering sleep mode mfd: arizona: Add better support for system suspend mfd: wm5110: Add delay before releasing reset line drivers/mfd/arizona-core.c | 338 ++++++++++++++++++++++++++++++++------ drivers/regulator/arizona-ldo1.c | 15 ++ include/linux/mfd/arizona/core.h | 1 + 3 files changed, 302 insertions(+), 52 deletions(-) -- 1.7.2.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
