From: Ian Abbott <[EMAIL PROTECTED]>

The attached patch adds the following new devices to the ftdi_sio driver:

* microHAM USB-Y6 and USB-Y8 devices submitted by Justin Burket (KL1RL).
* Evolution Robotics ER1 Control Module submitted by Shawn M.  Lavelle.

Signed-off-by: Ian Abbott <[EMAIL PROTECTED]>
Signed-off-by: Greg Kroah-Hartman <[EMAIL PROTECTED]>

---
 drivers/usb/serial/ftdi_sio.c |    3 +++
 drivers/usb/serial/ftdi_sio.h |   14 ++++++++++++++
 2 files changed, 17 insertions(+)

--- gregkh-2.6.orig/drivers/usb/serial/ftdi_sio.c       2005-07-29 
11:29:48.000000000 -0700
+++ gregkh-2.6/drivers/usb/serial/ftdi_sio.c    2005-07-29 11:36:25.000000000 
-0700
@@ -429,6 +429,9 @@
        { USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_2_PID) },
        { USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) },
        { USB_DEVICE(FTDI_VID, FTDI_ACTIVE_ROBOTS_PID) },
+       { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y6_PID) },
+       { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y8_PID) },
+       { USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) },
        { }                                             /* Terminating entry */
 };
 
--- gregkh-2.6.orig/drivers/usb/serial/ftdi_sio.h       2005-07-29 
11:29:48.000000000 -0700
+++ gregkh-2.6/drivers/usb/serial/ftdi_sio.h    2005-07-29 11:36:25.000000000 
-0700
@@ -265,10 +265,24 @@
 #define MOBILITY_USB_SERIAL_PID                0x0202  /* EasiDock USB 200 
serial */
 
 /*
+ * microHAM product IDs (http://www.microham.com).
+ * Submitted by Justin Burket (KL1RL) <[EMAIL PROTECTED]>.
+ */
+#define FTDI_MHAM_Y6_PID 0xEEEA                /* USB-Y6 interface */
+#define FTDI_MHAM_Y8_PID 0xEEEB                /* USB-Y8 interface */
+
+/*
  * Active Robots product ids.
  */
 #define FTDI_ACTIVE_ROBOTS_PID 0xE548  /* USB comms board */
 
+/*
+ * Evolution Robotics products (http://www.evolution.com/).
+ * Submitted by Shawn M. Lavelle.
+ */
+#define EVOLUTION_VID          0xDEEE  /* Vendor ID */
+#define EVOLUTION_ER1_PID      0x0300  /* ER1 Control Module */
+
 /* Commands */
 #define FTDI_SIO_RESET                 0 /* Reset the port */
 #define FTDI_SIO_MODEM_CTRL    1 /* Set the modem control register */

--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to