From: Micky Ching <micky_ch...@realsil.com.cn>
add SD4.0 register define and host data structure for
handshake with SD4.0 card.
Signed-off-by: Micky Ching <micky_ch...@realsil.com.cn>
Signed-off-by: Wei Wang <wei_w...@realsil.com.cn>
---
drivers/mmc/host/sdhci.h | 136 ++++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 135 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index e639b7f..659eb64 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -73,6 +73,9 @@
#define SDHCI_DATA_LVL_MASK 0x00F00000
#define SDHCI_DATA_LVL_SHIFT 20
#define SDHCI_DATA_0_LVL_MASK 0x00100000
+#define SDHCI_IN_DORMANT_STATE 0x20000000
+#define SDHCI_LANE_SYNC 0x40000000
+#define SDHCI_STBL_DETECT 0x80000000
#define SDHCI_HOST_CONTROL 0x28
#define SDHCI_CTRL_LED 0x01
@@ -90,6 +93,8 @@
#define SDHCI_POWER_180 0x0A
#define SDHCI_POWER_300 0x0C
#define SDHCI_POWER_330 0x0E
+#define SDHCI_VDD1_SHIFT 0
+#define SDHCI_VDD2_SHIFT 4
#define SDHCI_BLOCK_GAP_CONTROL 0x2A
@@ -162,6 +167,7 @@
#define SDHCI_CTRL_UHS_SDR104 0x0003
#define SDHCI_CTRL_UHS_DDR50 0x0004
#define SDHCI_CTRL_HS400 0x0005 /* Non-standard */
+#define SDHCI_CTRL_UHSII 0x0007
#define SDHCI_CTRL_VDD_180 0x0008
#define SDHCI_CTRL_DRV_TYPE_MASK 0x0030
#define SDHCI_CTRL_DRV_TYPE_B 0x0000
@@ -170,6 +176,10 @@
#define SDHCI_CTRL_DRV_TYPE_D 0x0030
#define SDHCI_CTRL_EXEC_TUNING 0x0040
#define SDHCI_CTRL_TUNED_CLK 0x0080
+#define SDHCI_CTRL_UHSII_IF_ENABLE 0x0100
+#define SDHCI_CTRL_HOST_V4_ENABLE 0x1000
+#define SDHCI_CTRL_64BIT_ADDR_ENABLE 0x2000
+#define SDHCI_CTRL_ASYNC_INT_ENABLE 0x4000
#define SDHCI_CTRL_PRESET_VAL_ENABLE 0x8000
#define SDHCI_CAPABILITIES 0x40
@@ -194,6 +204,7 @@
#define SDHCI_SUPPORT_SDR50 0x00000001
#define SDHCI_SUPPORT_SDR104 0x00000002
#define SDHCI_SUPPORT_DDR50 0x00000004
+#define SDHCI_SUPPORT_UHSII 0x00000008
#define SDHCI_DRIVER_TYPE_A 0x00000010
#define SDHCI_DRIVER_TYPE_C 0x00000020
#define SDHCI_DRIVER_TYPE_D 0x00000040
@@ -205,6 +216,8 @@
#define SDHCI_CLOCK_MUL_MASK 0x00FF0000
#define SDHCI_CLOCK_MUL_SHIFT 16
#define SDHCI_SUPPORT_HS400 0x80000000 /* Non-standard */
+#define SDHCI_CAN_DO_ADMA3 0x08000000
+#define SDHCI_CAN_VDD2_180 0x10000000
#define SDHCI_CAPABILITIES_1 0x44
@@ -230,7 +243,7 @@
#define SDHCI_ADMA_ADDRESS 0x58
#define SDHCI_ADMA_ADDRESS_HI 0x5C
-/* 60-FB reserved */
+/* 60-73 reserved */
#define SDHCI_PRESET_FOR_SDR12 0x66
#define SDHCI_PRESET_FOR_SDR25 0x68
@@ -245,6 +258,71 @@
#define SDHCI_PRESET_SDCLK_FREQ_MASK 0x3FF
#define SDHCI_PRESET_SDCLK_FREQ_SHIFT 0
+#define SDHCI_PRESET_VALUE_UHSII 0x74
+#define SDHCI_ADMA3_ID_ADDRESS 0x78
+
+#define SDHCI_UHSII_BLOCK_SIZE 0x80
+#define SDHCI_UHSII_BLOCK_COUNT 0x84
+
+#define SDHCI_UHSII_CMD_PACKET 0x88
+#define SDHCI_UHSII_CMD_PACK_LEN 20
+#define SDHCI_UHSII_CMD_HEADER (SDHCI_UHSII_CMD_PACKET)
+#define SDHCI_UHSII_CMD_ARGUMENT (SDHCI_UHSII_CMD_PACKET + 2)
+#define SDHCI_UHSII_CMD_PAYLOAD (SDHCI_UHSII_CMD_PACKET + 4)
+
+#define SDHCI_UHSII_TRANSFER_MODE 0x9C
+#define SDHCI_UHSII_TRNS_DMA 0x01
+#define SDHCI_UHSII_TRNS_BLK_CNT_EN 0x02
+#define SDHCI_UHSII_TRNS_WRITE 0x10
+#define SDHCI_UHSII_TRNS_BYTE_MODE 0x20
+#define SDHCI_UHSII_TRNS_WAIT_EBSY 0x4000
+#define SDHCI_UHSII_TRANS_2LANE_HD 0x8000
+#define SDHCI_UHSII_COMMAND 0x9E
+#define SDHCI_UHSII_DATA_PRESENT 0x0020
+#define SDHCI_UHSII_NORMAL_COMMAND (0 << 6)
+#define SDHCI_UHSII_TRANS_ABORT_CCMD (1 << 6)
+#define SDHCI_UHSII_ABORT_COMMAND (2 << 6)
+#define SDHCI_UHSII_GO_DORMANT (3 << 6)
+#define SDHCI_UHSII_COMMAND_LEN_SHIFT 8
+#define SDHCI_UHSII_COMMAND_LEN_MASK 0x1F
+
+#define SDHCI_UHSII_RESPONSE 0xA0
+#define SDHCI_UHSII_RESP_LEN 20
+#define SDHCI_UHSII_RESP_HEADER SDHCI_UHSII_RESPONSE
+#define SDHCI_UHSII_RESP_ARGUMENT (SDHCI_UHSII_RESPONSE + 2)
+#define SDHCI_UHSII_RESP_PAYLOAD (SDHCI_UHSII_RESPONSE + 4)
+
+#define SDHCI_UHSII_MSG_SEL 0xB4
+#define SDHCI_UHSII_MSG_REG 0xB8
+#define SDHCI_UHSII_DEV_INT_STATUS 0xBC
+#define SDHCI_UHSII_DEV_SEL 0xBE
+#define SDHCI_UHSII_INT_CODE 0xBF
+#define SDHCI_UHSII_SOFT_RESET 0xC0
+#define SDHCI_UHSII_HOST_FULL_RESET 0x0001
+#define SDHCI_UHSII_TIMER_CONTROL 0xC2
+#define SDHCI_UHSII_INT_STATUS 0xC4
+#define SDHCI_UHSII_INT_ENABLE 0xC8
+#define SDHCI_UHSII_SIGNAL_ENABLE 0xCC
+#define SDHCI_UHSII_INT_HEADER 0x00000001
+#define SDHCI_UHSII_INT_RES 0x00000002
+#define SDHCI_UHSII_INT_EXPIRED 0x00000004
+#define SDHCI_UHSII_INT_CRC 0x00000008
+#define SDHCI_UHSII_INT_FRAMING 0x00000010
+#define SDHCI_UHSII_INT_TID 0x00000020
+#define SDHCI_UHSII_INT_UNRECOVERABLE 0x00000080
+#define SDHCI_UHSII_INT_EBSY 0x00000100
+#define SDHCI_UHSII_INT_ADMA 0x00008000
+#define SDHCI_UHSII_INT_TO_RES 0x00010000
+#define SDHCI_UHSII_INT_TO_DEADLOCK 0x00020000
+#define SDHCI_UHSII_INT_TIMEOUT \
+ (SDHCI_UHSII_INT_TO_RES | SDHCI_UHSII_INT_TO_DEADLOCK)
+
+#define SDHCI_UHSII_SETTINGS_PTR 0xE0
+#define SDHCI_UHSII_HOST_CAPS_PTR 0xE2
+#define SDHCI_UHSII_TEST_REG_PTR 0xE4
+#define SDHCI_EMBEDDED_CONTROL_PTR 0xE6
+#define SDHCI_VENDOR_SPEC_AREA_PTR 0xE8
+
#define SDHCI_SLOT_INT_STATUS 0xFC
#define SDHCI_HOST_VERSION 0xFE
@@ -255,6 +333,42 @@
#define SDHCI_SPEC_100 0
#define SDHCI_SPEC_200 1
#define SDHCI_SPEC_300 2
+#define SDHCI_SPEC_400 3
+
+#define SDHCI_UHSII_GENERAL_REG 0x00
+#define SDHCI_UHSII_PHY_REG 0x04
+#define SDHCI_UHSII_LINK_REG_L 0x08
+#define SDHCI_UHSII_LINK_REG_H 0x0C
+
+/* UHS-II General Setting */
+#define SDHCI_UHSII_LOW_PWR_MODE 0x01
+
+/* UHS-II General Capabilities */
+#define SDHCI_UHSII_LANES_SHIFT 8
+#define SDHCI_UHSII_LANES_MASK 0x3F00
+#define SDHCI_UHSII_LANES_2L_HD 0x01
+#define SDHCI_UHSII_LANES_2D1U_FD 0x02
+#define SDHCI_UHSII_LANES_1D2U_FD 0x04
+#define SDHCI_UHSII_LANES_2D2U_FD 0x08
+#define SDHCI_UHSII_GAP_SHIFT 4
+#define SDHCI_UHSII_GAP_MASK 0xF0
+#define SDHCI_UHSII_DAP_SHIFT 0
+#define SDHCI_UHSII_DAP_MASK 0x0F
+
+/* UHS-II PHY Capabilities */
+#define SDHCI_UHSII_LSS_DIR_SHIFT 20
+#define SDHCI_UHSII_LSS_DIR_MASK (0x0F >> SDHCI_UHSII_LSS_DIR_SHIFT)
+#define SDHCI_UHSII_LSS_SYN_SHIFT 16
+#define SDHCI_UHSII_LSS_SYN_MASK (0x0F >> SDHCI_UHSII_LSS_SYN_SHIFT)
+#define SDHCI_UHSII_RANGE_SHIFT 6
+#define SDHCI_UHSII_RANGE_MASK 0xC0
+#define SDHCI_UHSII_RANGE_A 0x00
+#define SDHCI_UHSII_RANGE_AB 0x01
+
+/* UHS-II LINK/TRAN Capabilities */
+#define SDHCI_UHSII_DATA_GAP_MASK 0xFF
+#define SDHCI_UHSII_N_FCU_SHIFT 8
+#define SDHCI_UHSII_N_FCU_MASK 0xFF00
/*
* End of controller registers.
@@ -441,6 +555,7 @@ struct sdhci_host {
#define SDHCI_USING_RETUNING_TIMER (1<<11) /* Host is using a retuning
timer for the card */
#define SDHCI_USE_64_BIT_DMA (1<<12) /* Use 64-bit DMA */
#define SDHCI_HS400_TUNING (1<<13) /* Tuning for HS400 */
+#define SDHCI_HOST_V4_ENABLED (1<<12)
unsigned int version; /* SDHCI spec. version */
@@ -451,11 +566,25 @@ struct sdhci_host {
unsigned int clock; /* Current clock (MHz) */
u8 pwr; /* Current voltage */
+ bool uhsii_if_enabled;
+ u8 lane_mode;
+ u8 max_gap;
+ u8 max_dap;
+ u8 n_data_gap;
+ u8 n_fcu;
+ u8 n_lss_dir;
+ u8 n_lss_syn;
+ u8 speed_range;
+
+ u16 uhsii_settings_ptr;
+ u16 uhsii_caps_ptr;
+
bool runtime_suspended; /* Host is runtime suspended */
bool bus_on; /* Bus power prevents runtime suspend */
bool preset_enabled; /* Preset is enabled */
struct mmc_request *mrq; /* Current request */
+ struct mmc_tlp *tlp; /* Current native TLP */
struct mmc_command *cmd; /* Current command */
struct mmc_data *data; /* Current data request */
unsigned int data_early:1; /* Data finished before cmd */
@@ -627,6 +756,11 @@ static inline u8 sdhci_readb(struct sdhci_host *host, int
reg)
#endif /* CONFIG_MMC_SDHCI_IO_ACCESSORS */
+static inline u32 sdhci_raw_readl(struct sdhci_host *host, int reg)
+{
+ return __raw_readl(host->ioaddr + reg);
+}
+
extern struct sdhci_host *sdhci_alloc_host(struct device *dev,
size_t priv_size);
extern void sdhci_free_host(struct sdhci_host *host);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
