Hi, Here are two patches to bring support for a new hardware based on SAM9G25 SoC.
The first one adds the PIN controller definition for PWM0. The second defines the new board. Changes since v1: - drop useless comments - move pwm0 pinctrl's node close to tcb0 - drop ek boards from compatible machine - add at91sam9g25 board to compatible machine Changes since v2: - update to v4.0 - fix alphabetical order between gpio_keys and pwm_leds Changes since v3: - add num-ports = <1> attribute to ohci node Changes since v4: - update to v4.0.1 - update "Acked-by" list Best regards, Gaël PORTAY (2): ARM: at91/dt: sam9x5: add pinctrl for pwm0 ARM: at91/dt: add support for kizboxmini arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/at91-kizboxmini.dts | 130 ++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/at91sam9x5.dtsi | 46 ++++++++++++ 3 files changed, 177 insertions(+) create mode 100644 arch/arm/boot/dts/at91-kizboxmini.dts -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
