Thanks.
Pls see my comments below.
-----Original Message-----
From: Wood Scott-B07421
Sent: Thursday, May 07, 2015 4:44 AM
To: Lu Yangbo-B47093
Cc: linuxppc-...@lists.ozlabs.org; linux-kernel@vger.kernel.org
Subject: Re: [PATCH] powerpc/dts: Add 1588 timer node for eTSEC
On Wed, 2015-05-06 at 17:40 +0800, Yangbo Lu wrote:
> Add 1588 timer node in files:
> arch/powerpc/boot/dts/bsc9131rdb.dtsi
> arch/powerpc/boot/dts/bsc9132qds.dtsi
> arch/powerpc/boot/dts/p1010rdb.dtsi
> arch/powerpc/boot/dts/p1020rdb-pd.dts
> arch/powerpc/boot/dts/p1021rdb-pc.dtsi
> arch/powerpc/boot/dts/p1022ds.dtsi
> arch/powerpc/boot/dts/p1025twr.dtsi
> arch/powerpc/boot/dts/p2020rdb-pc.dtsi
>
> Signed-off-by: Yangbo Lu <yangbo...@freescale.com>
> ---
> arch/powerpc/boot/dts/bsc9131rdb.dtsi | 12 ++++++++++++
> arch/powerpc/boot/dts/bsc9132qds.dtsi | 12 ++++++++++++
> arch/powerpc/boot/dts/p1010rdb.dtsi | 12 ++++++++++++
> arch/powerpc/boot/dts/p1020rdb-pd.dts | 12 ++++++++++++
> arch/powerpc/boot/dts/p1021rdb-pc.dtsi | 12 ++++++++++++
> arch/powerpc/boot/dts/p1022ds.dtsi | 12 ++++++++++++
> arch/powerpc/boot/dts/p1025twr.dtsi | 12 ++++++++++++
> arch/powerpc/boot/dts/p2020rdb-pc.dtsi | 15 +++++++++------
> 8 files changed, 93 insertions(+), 6 deletions(-)
>
> diff --git a/arch/powerpc/boot/dts/bsc9131rdb.dtsi
> b/arch/powerpc/boot/dts/bsc9131rdb.dtsi
> index 45efcba..629cc03 100644
> --- a/arch/powerpc/boot/dts/bsc9131rdb.dtsi
> +++ b/arch/powerpc/boot/dts/bsc9131rdb.dtsi
> @@ -80,6 +80,18 @@
> status = "disabled";
> };
>
> + ptp_clock@b0e00 {
> + compatible = "fsl,etsec-ptp";
> + reg = <0xb0e00 0xb0>;
> + interrupts = <68 2 0 0 69 2 0 0>;
> + fsl,tclk-period = <5>;
> + fsl,tmr-prsc = <2>;
> + fsl,tmr-add = <0xcccccccd>;
> + fsl,tmr-fiper1 = <0x3b9ac9fb>;
> + fsl,tmr-fiper2 = <0x00018696>;
> + fsl,max-adj = <249999999>;
Please don't use hex for numbers that make more sense as decimal.
[Lu Yangbo-B47093] The hex value is register value, I think it's better to use
hex.
> --- a/arch/powerpc/boot/dts/p2020rdb-pc.dtsi
> +++ b/arch/powerpc/boot/dts/p2020rdb-pc.dtsi
> @@ -215,12 +215,15 @@
> };
>
> ptp_clock@24e00 {
> - fsl,tclk-period = <5>;
> - fsl,tmr-prsc = <200>;
> - fsl,tmr-add = <0xCCCCCCCD>;
> - fsl,tmr-fiper1 = <0x3B9AC9FB>;
> - fsl,tmr-fiper2 = <0x0001869B>;
> - fsl,max-adj = <249999999>;
> + compatible = "fsl,etsec-ptp";
> + reg = <0x24e00 0xb0>;
> + interrupts = <68 2 0 0 69 2 0 0>;
> + fsl,tclk-period = <5>;
> + fsl,tmr-prsc = <2>;
> + fsl,tmr-add = <0xaaaaaaab>;
> + fsl,tmr-fiper1 = <0x3b9ac9fb>;
> + fsl,tmr-fiper2 = <0x00018696>;
> + fsl,max-adj = <299999999>;
> };
This isn't adding a node -- it's changing values. If the old ones were wrong,
explain that in the changelog.
Also, p2020si-post.dtsi already adds interrupts to this node (and it contains
one more interrupt than the above), and it includes pq3-etsec1-timer-0.dtsi
which contains the compatible and reg (and interrupts with two specifiers).
Probably all of these should be using pq3-etsec1-timer-0.dtsi and only
specifying the board-specific values.
[Lu Yangbo-B47093] I will modify according your comments here.
-Scott
