Hi Shawn,
On 11/05/15 14:01, Shawn Guo wrote:
On Sat, May 09, 2015 at 10:54:30PM +0200, Philippe Reynes wrote:
According to the imx27 documentation, fec has a 1 Kbyte
memory space map, spitted in two regions of 512 bytes.
The first one for control/status registers, and the
second one for event/statistic registers. So, we don't
need to map 16 Kbyte for registers, 1 Kbyte is enough.
Signed-off-by: Philippe Reynes<[email protected]>
---
arch/arm/boot/dts/imx27.dtsi | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index 6951b66..56bb917 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -533,7 +533,7 @@
fec: ethernet@1002b000 {
compatible = "fsl,imx27-fec";
- reg =<0x1002b000 0x4000>;
+ reg =<0x1002b000 0x400>;
No. Per MCIMX27RM.pdf, Table 2-7. AIPI2 Memory Map, it should be 4KiB.
I agree, this table show that 4KiB is reserved for fec registers.
But, in paragraph 29.6.1, there is :
"The FEC implementation requires a 1-Kbyte memory map space"
So I've thought that 1 Kbye is enough for the register memory space.
I'm pleased to understand that we're both agree that 16 Kbyte is too large.
If you prefer 4 Kbyte, I'll send a v2 of this patch with this value.
Shawn
Regards,
Philippe
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
