On Tue, May 12, 2015 at 05:26:36PM +0800, Xing Zheng wrote: > From: zhengxing <[email protected]> > > The driver is used for rockchip board using a rt5650/rt5645. > Test on RK3288 with rt5650.
Similar comments to the Maxim driver plus...
> +/* Jack detect via rt5645 driver. */
> +extern int rt5645_set_jack_detect(struct snd_soc_codec *codec,
> + struct snd_soc_jack *hp_jack,
> + struct snd_soc_jack *mic_jack,
> + struct snd_soc_jack *btn_jack);
> +
> +/* For compatible. */
> +int __weak rt5645_set_jack_detect(struct snd_soc_codec *codec,
> + struct snd_soc_jack *hp_jack,
> + struct snd_soc_jack *mic_jack,
> + struct snd_soc_jack *btn_jack)
> +{
> + dev_warn(codec->dev, "Jack detect dummy, have no implement it?\n");
> +
> + return 0;
> +}
Don't do this - if the functionality isn't there in the CODEC driver get
it implemented before you use it. Make sure you're using the API the
CODEC actually ends up exporting.
> + /* Enable Headset and 4 Buttons Jack detection */
> + ret = snd_soc_card_jack_new(card, "Headphone Jack",
> + SND_JACK_HEADPHONE | SND_JACK_MICROPHONE,
> + ret = snd_soc_card_jack_new(card, "Mic Jack",
> +
> + ret = snd_soc_card_jack_new(card, "Button Jack",
No, don't do this - as discussed in another Chromebook review (I'm
guessing this is a Chromebook) the jacks should represent the physical
jacks in the system. It's possible you have separate headphone and
microphone jacks but I really expect microphone and button to be on the
same socket.
signature.asc
Description: Digital signature
