Usage of labels instead of full paths reduces possible mistakes when
overriding nodes. Additionally remove duplicated serial and uart labels
for serial.
Signed-off-by: Krzysztof Kozlowski <k.kozlowsk...@gmail.com>
---
arch/arm/boot/dts/exynos5420-peach-pit.dts | 2 +-
arch/arm/boot/dts/exynos5420.dtsi | 82 +++++++++++++++---------------
arch/arm/boot/dts/exynos5800-peach-pi.dts | 2 +-
3 files changed, 43 insertions(+), 43 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts
b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 146e71118a72..8f4d76c5e11c 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -1027,7 +1027,7 @@
};
};
-&uart_3 {
+&serial_3 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/exynos5420.dtsi
b/arch/arm/boot/dts/exynos5420.dtsi
index 5246556e2e24..72908cb0a69e 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -323,13 +323,6 @@
interrupts = <0 47 0>;
};
- rtc: rtc@101E0000 {
- clocks = <&clock CLK_RTC>;
- clock-names = "rtc";
- interrupt-parent = <&pmu_system_controller>;
- status = "disabled";
- };
-
amba {
#address-cells = <1>;
#size-cells = <1>;
@@ -500,26 +493,6 @@
status = "disabled";
};
- uart_0: serial@12C00000 {
- clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
- clock-names = "uart", "clk_uart_baud0";
- };
-
- uart_1: serial@12C10000 {
- clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
- clock-names = "uart", "clk_uart_baud0";
- };
-
- uart_2: serial@12C20000 {
- clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
- clock-names = "uart", "clk_uart_baud0";
- };
-
- uart_3: serial@12C30000 {
- clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
- clock-names = "uart", "clk_uart_baud0";
- };
-
pwm: pwm@12dd0000 {
compatible = "samsung,exynos4210-pwm";
reg = <0x12dd0000 0x100>;
@@ -535,14 +508,6 @@
#phy-cells = <0>;
};
- dp: dp-controller@145B0000 {
- clocks = <&clock CLK_DP1>;
- clock-names = "dp";
- phys = <&dp_phy>;
- phy-names = "dp";
- power-domains = <&disp_pd>;
- };
-
mipi_phy: video-phy@10040714 {
compatible = "samsung,s5pv210-mipi-video-phy";
reg = <0x10040714 12>;
@@ -562,12 +527,6 @@
status = "disabled";
};
- fimd: fimd@14400000 {
- clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
- clock-names = "sclk_fimd", "fimd";
- power-domains = <&disp_pd>;
- };
-
adc: adc@12D10000 {
compatible = "samsung,exynos-adc-v2";
reg = <0x12D10000 0x100>;
@@ -967,3 +926,44 @@
samsung,pmureg-phandle = <&pmu_system_controller>;
};
};
+
+&dp {
+ clocks = <&clock CLK_DP1>;
+ clock-names = "dp";
+ phys = <&dp_phy>;
+ phy-names = "dp";
+ power-domains = <&disp_pd>;
+};
+
+&fimd {
+ clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
+ clock-names = "sclk_fimd", "fimd";
+ power-domains = <&disp_pd>;
+};
+
+&rtc {
+ clocks = <&clock CLK_RTC>;
+ clock-names = "rtc";
+ interrupt-parent = <&pmu_system_controller>;
+ status = "disabled";
+};
+
+&serial_0 {
+ clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
+ clock-names = "uart", "clk_uart_baud0";
+};
+
+&serial_1 {
+ clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
+ clock-names = "uart", "clk_uart_baud0";
+};
+
+&serial_2 {
+ clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
+ clock-names = "uart", "clk_uart_baud0";
+};
+
+&serial_3 {
+ clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
+ clock-names = "uart", "clk_uart_baud0";
+};
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts
b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 02eb8b15374f..7d5b386b5ae6 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -990,7 +990,7 @@
};
};
-&uart_3 {
+&serial_3 {
status = "okay";
};
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
