- Added cm32181_als_info structure.

Signed-off-by: Kevin Tsai <kt...@capellamicro.com>
---
 drivers/iio/light/cm32181.c | 42 +++++++++++++++++++++++++++++++++---------
 1 file changed, 33 insertions(+), 9 deletions(-)

diff --git a/drivers/iio/light/cm32181.c b/drivers/iio/light/cm32181.c
index 0491d73..6b11145 100644
--- a/drivers/iio/light/cm32181.c
+++ b/drivers/iio/light/cm32181.c
@@ -48,6 +48,7 @@
 #define CM32181_ALS_WL_DEFAULT         0x0000
 
 /* Software parameters */
+#define CM32181_HW_ID                  0x81
 #define CM32181_MLUX_PER_BIT           5       /* ALS_SM=01 IT=800ms */
 #define CM32181_MLUX_PER_BIT_BASE_IT   800000  /* Based on IT=800ms */
 #define        CM32181_CALIBSCALE_DEFAULT      1000
@@ -58,11 +59,31 @@ static const int als_it_bits[] = {12, 8, 0, 1, 2, 3};
 static const int als_it_value[] = {25000, 50000, 100000, 200000, 400000,
        800000};
 
+struct cm32181_als_info {
+       u8 hw_id;
+       u16 reg_cmd;
+       u16 reg_als_wh;
+       u16 reg_als_wl;
+       int calibscale;
+       int mlux_per_bit;
+       int mlux_per_bit_base_it;
+};
+
+static struct cm32181_als_info cm32181_als_info_default = {
+       .hw_id = CM32181_HW_ID,
+       .reg_cmd = CM32181_CMD_DEFAULT,
+       .reg_als_wh = CM32181_ALS_WH_DEFAULT,
+       .reg_als_wl = CM32181_ALS_WL_DEFAULT,
+       .calibscale = CM32181_CALIBSCALE_DEFAULT,
+       .mlux_per_bit = CM32181_MLUX_PER_BIT,
+       .mlux_per_bit_base_it = CM32181_MLUX_PER_BIT_BASE_IT,
+};
+
 struct cm32181_chip {
        struct i2c_client *client;
        struct mutex lock;
+       struct cm32181_als_info *als_info;
        u16 conf_regs[CM32181_CONF_REG_NUM];
-       int calibscale;
 };
 
 /**
@@ -76,22 +97,25 @@ struct cm32181_chip {
 static int cm32181_reg_init(struct cm32181_chip *chip)
 {
        struct i2c_client *client = chip->client;
+       struct cm32181_als_info *als_info;
        int i;
        s32 ret;
 
+       chip->als_info = &cm32181_als_info_default;
+       als_info = chip->als_info;
+
        ret = i2c_smbus_read_word_data(client, CM32181_REG_ADDR_ID);
        if (ret < 0)
                return ret;
 
        /* check device ID */
-       if ((ret & 0xFF) != 0x81)
+       if ((ret & 0xFF) != als_info->hw_id)
                return -ENODEV;
 
        /* Default Values */
-       chip->conf_regs[CM32181_REG_ADDR_CMD] = CM32181_CMD_DEFAULT;
-       chip->conf_regs[CM32181_REG_ADDR_ALS_WH] = CM32181_ALS_WH_DEFAULT;
-       chip->conf_regs[CM32181_REG_ADDR_ALS_WL] = CM32181_ALS_WL_DEFAULT;
-       chip->calibscale = CM32181_CALIBSCALE_DEFAULT;
+       chip->conf_regs[CM32181_REG_ADDR_CMD] = als_info->reg_cmd;
+       chip->conf_regs[CM32181_REG_ADDR_ALS_WH] = als_info->reg_als_wh;
+       chip->conf_regs[CM32181_REG_ADDR_ALS_WL] = als_info->reg_als_wl;
 
        /* Initialize registers*/
        for (i = 0; i < CM32181_CONF_REG_NUM; i++) {
@@ -197,7 +221,7 @@ static int cm32181_get_lux(struct cm32181_chip *chip)
                return ret;
 
        lux *= ret;
-       lux *= chip->calibscale;
+       lux *= chip->als_info->calibscale;
        lux /= CM32181_CALIBSCALE_RESOLUTION;
        lux /= MLUX_PER_LUX;
 
@@ -222,7 +246,7 @@ static int cm32181_read_raw(struct iio_dev *indio_dev,
                *val = ret;
                return IIO_VAL_INT;
        case IIO_CHAN_INFO_CALIBSCALE:
-               *val = chip->calibscale;
+               *val = chip->als_info->calibscale;
                return IIO_VAL_INT;
        case IIO_CHAN_INFO_INT_TIME:
                *val = 0;
@@ -242,7 +266,7 @@ static int cm32181_write_raw(struct iio_dev *indio_dev,
 
        switch (mask) {
        case IIO_CHAN_INFO_CALIBSCALE:
-               chip->calibscale = val;
+               chip->als_info->calibscale = val;
                return val;
        case IIO_CHAN_INFO_INT_TIME:
                ret = cm32181_write_als_it(chip, val2);
-- 
1.8.3.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to