On 19/05/15 23:43, Kevin Tsai wrote:
> Added Device Tree Support.
>
> Signed-off-by: Kevin Tsai <kt...@capellamicro.com>
> ---
> Added Device Tree support.
> Updated company name.
> Renamed register name.
>
> .../devicetree/bindings/iio/light/cm3232.txt | 22 +++++++
> MAINTAINERS | 12 ++--
> drivers/iio/light/Kconfig | 4 +-
> drivers/iio/light/cm3232.c | 71
> ++++++++++++++--------
> 4 files changed, 76 insertions(+), 33 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/iio/light/cm3232.txt
>
> diff --git a/Documentation/devicetree/bindings/iio/light/cm3232.txt
> b/Documentation/devicetree/bindings/iio/light/cm3232.txt
> new file mode 100644
> index 0000000..00dde87
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/light/cm3232.txt
> @@ -0,0 +1,22 @@
> +* Vishay Capella CM3232 Ambient Light sensor
> +
> +Required properties:
> +- compatible: must be "capella,cm3232"
> +- reg: the I2C address of the device
> +
> +Optional properties:
I'd much rather we avoided the magic numbers and broke these up into the
individual
elements that are stored in the registers.
> +- capella,reg_cmd: command register initialization.
> +- capella,calibscale: calibrated factor with 10^-5 notation.
> +- capella,hw_id: hardware device id.
I don't think hw_id has any place in here. Should be covered by the compatible
list
to my mind.
> +- capella,mlux_per_bit: millilux per bit under the default IT.
Is this not closely related to the calibscale?
> +
> +Example:
> +
> +cm3232@10 {
> + compatible = "capella,cm3232";
> + reg = <0x10>;
> + capella,reg_cmd = <0x04>;
> + capella,calibscale = <100000>;
> + capella,hw_id = <0x32>;
> + capella,mlux_per_bit = <64>;
> +};
> diff --git a/MAINTAINERS b/MAINTAINERS
> index f8e0afb..ee6a8f6 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -2431,12 +2431,6 @@ F: security/capability.c
> F: security/commoncap.c
> F: kernel/capability.c
>
> -CAPELLA MICROSYSTEMS LIGHT SENSOR DRIVER
> -M: Kevin Tsai <kt...@capellamicro.com>
> -S: Maintained
> -F: drivers/iio/light/cm*
> -F: Documentation/devicetree/bindings/i2c/trivial-devices.txt
> -
> CC2520 IEEE-802.15.4 RADIO DRIVER
> M: Varka Bhadram <varkabhad...@gmail.com>
> L: linux-w...@vger.kernel.org
> @@ -10610,6 +10604,12 @@ L: net...@vger.kernel.org
> S: Maintained
> F: drivers/net/ethernet/via/via-velocity.*
>
> +VISHAY CAPELLA LIGHT SENSOR DRIVER
> +M: Kevin Tsai <kt...@capellamicro.com>
> +S: Maintained
> +F: drivers/iio/light/cm*
> +F: Documentation/devicetree/bindings/i2c/trivial-devices.txt
> +
> VIVID VIRTUAL VIDEO DRIVER
> M: Hans Verkuil <hverk...@xs4all.nl>
> L: linux-me...@vger.kernel.org
> diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
> index a437bad..5e7e311 100644
> --- a/drivers/iio/light/Kconfig
> +++ b/drivers/iio/light/Kconfig
> @@ -50,11 +50,11 @@ config CM32181
>
> config CM3232
> depends on I2C
> - tristate "CM3232 ambient light sensor"
> + tristate "Vishay Capella CM3232 ambient light sensor"
> help
> Say Y here if you use cm3232.
> This option enables ambient light sensor using
> - Capella Microsystems cm3232 device driver.
> + Vishay Capella cm3232 device driver.
>
> To compile this driver as a module, choose M here:
> the module will be called cm3232.
> diff --git a/drivers/iio/light/cm3232.c b/drivers/iio/light/cm3232.c
> index 39c8d99..5354bfa 100644
> --- a/drivers/iio/light/cm3232.c
> +++ b/drivers/iio/light/cm3232.c
> @@ -1,8 +1,7 @@
> /*
> * CM3232 Ambient Light Sensor
> *
> - * Copyright (C) 2014-2015 Capella Microsystems Inc.
> - * Author: Kevin Tsai <kt...@capellamicro.com>
> + * Copyright (C) 2014-2015 Vishay Capella
> *
> * This program is free software; you can redistribute it and/or modify it
> * under the terms of the GNU General Public License version 2, as published
> @@ -54,7 +53,7 @@ static const struct {
> };
>
> struct cm3232_als_info {
> - u8 regs_cmd_default;
> + u8 reg_cmd;
> u8 hw_id;
> int calibscale;
> int mlux_per_bit;
> @@ -62,7 +61,7 @@ struct cm3232_als_info {
> };
>
I had clearly missed the use of a non const info structure in here.
Could you clean this up as well?
(basically make a copy and work on that allowing this default version to
become const)
> static struct cm3232_als_info cm3232_als_info_default = {
> - .regs_cmd_default = CM3232_CMD_DEFAULT,
> + .reg_cmd = CM3232_CMD_DEFAULT,
> .hw_id = CM3232_HW_ID,
> .calibscale = CM3232_CALIBSCALE_DEFAULT,
> .mlux_per_bit = CM3232_MLUX_PER_BIT_DEFAULT,
> @@ -72,10 +71,27 @@ static struct cm3232_als_info cm3232_als_info_default = {
> struct cm3232_chip {
> struct i2c_client *client;
> struct cm3232_als_info *als_info;
> - u8 regs_cmd;
> - u16 regs_als;
> + u8 reg_cmd;
> + u16 reg_als;
> };
>
> +#ifdef CONFIG_OF
> +void cm3232_parse_dt(struct cm3232_chip *chip)
> +{
> + struct device_node *dn = chip->client->dev.of_node;
> + u32 temp_val;
> +
> + if (!of_property_read_u32(dn, "capella,reg_cmd", &temp_val))
> + chip->als_info->reg_cmd = (uint8_t)temp_val;
> + if (!of_property_read_u32(dn, "capella,hw_id", &temp_val))
> + chip->als_info->hw_id = (int)temp_val;
> + if (!of_property_read_u32(dn, "capella,calibscale", &temp_val))
> + chip->als_info->calibscale = (int)temp_val;
> + if (!of_property_read_u32(dn, "capella,mlux_per_bit", &temp_val))
> + chip->als_info->mlux_per_bit = (int)temp_val;
> +}
> +#endif
> +
> /**
> * cm3232_reg_init() - Initialize CM3232
> * @chip: pointer of struct cm3232_chip.
> @@ -90,6 +106,10 @@ static int cm3232_reg_init(struct cm3232_chip *chip)
> s32 ret;
>
> chip->als_info = &cm3232_als_info_default;
> +#ifdef CONFIG_OF
> + if (client->dev.of_node)
> + cm3232_parse_dt(chip);
> +#endif
>
> /* Identify device */
> ret = i2c_smbus_read_word_data(client, CM3232_REG_ADDR_ID);
> @@ -102,20 +122,20 @@ static int cm3232_reg_init(struct cm3232_chip *chip)
> return -ENODEV;
>
> /* Disable and reset device */
> - chip->regs_cmd = CM3232_CMD_ALS_DISABLE | CM3232_CMD_ALS_RESET;
> + chip->reg_cmd = CM3232_CMD_ALS_DISABLE | CM3232_CMD_ALS_RESET;
> ret = i2c_smbus_write_byte_data(client, CM3232_REG_ADDR_CMD,
> - chip->regs_cmd);
> + chip->reg_cmd);
> if (ret < 0) {
> dev_err(&chip->client->dev, "Error writing reg_cmd\n");
> return ret;
> }
>
> /* Register default value */
> - chip->regs_cmd = chip->als_info->regs_cmd_default;
> + chip->reg_cmd = chip->als_info->reg_cmd;
>
> /* Configure register */
> ret = i2c_smbus_write_byte_data(client, CM3232_REG_ADDR_CMD,
> - chip->regs_cmd);
> + chip->reg_cmd);
> if (ret < 0)
> dev_err(&chip->client->dev, "Error writing reg_cmd\n");
>
> @@ -123,21 +143,21 @@ static int cm3232_reg_init(struct cm3232_chip *chip)
> }
>
> /**
> - * cm3232_read_als_it() - Get sensor integration time
> - * @chip: pointer of struct cm3232_chip
> - * @val: pointer of int to load the integration (sec).
> - * @val2: pointer of int to load the integration time (microsecond).
> + * cm3232_read_als_it() - Get sensor integration time
> + * @chip: pointer of struct cm3232_chip
> + * @val: pointer of int to load the integration (sec).
> + * @val2: pointer of int to load the integration time (microsecond).
> *
> - * Report the current integration time.
> + * Report the current integration time.
> *
> - * Return: IIO_VAL_INT_PLUS_MICRO for success, otherwise -EINVAL.
> + * Return: IIO_VAL_INT_PLUS_MICRO for success, otherwise -EINVAL.
> */
> static int cm3232_read_als_it(struct cm3232_chip *chip, int *val, int *val2)
> {
> u16 als_it;
> int i;
>
> - als_it = chip->regs_cmd;
> + als_it = chip->reg_cmd;
> als_it &= CM3232_CMD_ALS_IT_MASK;
> als_it >>= CM3232_CMD_ALS_IT_SHIFT;
> for (i = 0; i < ARRAY_SIZE(cm3232_als_it_scales); i++) {
> @@ -175,14 +195,14 @@ static int cm3232_write_als_it(struct cm3232_chip
> *chip, int val, int val2)
> als_it = cm3232_als_it_scales[i].it;
> als_it <<= CM3232_CMD_ALS_IT_SHIFT;
>
> - cmd = chip->regs_cmd & ~CM3232_CMD_ALS_IT_MASK;
> + cmd = chip->reg_cmd & ~CM3232_CMD_ALS_IT_MASK;
> cmd |= als_it;
> ret = i2c_smbus_write_byte_data(client,
> CM3232_REG_ADDR_CMD,
> cmd);
> if (ret < 0)
> return ret;
> - chip->regs_cmd = cmd;
> + chip->reg_cmd = cmd;
> return 0;
> }
> }
> @@ -222,8 +242,8 @@ static int cm3232_get_lux(struct cm3232_chip *chip)
> return ret;
> }
>
> - chip->regs_als = (u16)ret;
> - lux *= chip->regs_als;
> + chip->reg_als = (u16)ret;
> + lux *= chip->reg_als;
> lux *= als_info->calibscale;
> lux = div_u64(lux, CM3232_CALIBSCALE_RESOLUTION);
> lux = div_u64(lux, CM3232_MLUX_PER_LUX);
> @@ -340,6 +360,7 @@ static int cm3232_probe(struct i2c_client *client,
> return -ENOMEM;
>
> chip = iio_priv(indio_dev);
> +
> i2c_set_clientdata(client, indio_dev);
> chip->client = client;
>
> @@ -386,9 +407,9 @@ static int cm3232_suspend(struct device *dev)
> struct i2c_client *client = chip->client;
> int ret;
>
> - chip->regs_cmd |= CM3232_CMD_ALS_DISABLE;
> + chip->reg_cmd |= CM3232_CMD_ALS_DISABLE;
> ret = i2c_smbus_write_byte_data(client, CM3232_REG_ADDR_CMD,
> - chip->regs_cmd);
> + chip->reg_cmd);
>
> return ret;
> }
> @@ -400,9 +421,9 @@ static int cm3232_resume(struct device *dev)
> struct i2c_client *client = chip->client;
> int ret;
>
> - chip->regs_cmd &= ~CM3232_CMD_ALS_DISABLE;
> + chip->reg_cmd &= ~CM3232_CMD_ALS_DISABLE;
> ret = i2c_smbus_write_byte_data(client, CM3232_REG_ADDR_CMD,
> - chip->regs_cmd | CM3232_CMD_ALS_RESET);
> + chip->reg_cmd | CM3232_CMD_ALS_RESET);
>
> return ret;
> }
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
