On 01/06/2015 at 18:18:46 +0200, Nicolas Ferre wrote :
> > + */
> > +/dts-v1/;
> > +#include "at91sam9g25.dtsi"
> > +/ {
> > + model = "Acme Systems Arietta G25";
> > + compatible = "acme,ariettag25", "atmel,at91sam9x5", "atmel,at91sam9";
> > +
>
> Don't we need to add a "alias" group here, to be sure that the
> "stdout-path" is always good whatever appends to the underlying
> at91sam9g25.dtsi (nitpicking, I know ;-)) ?
>
I've just checked and dtc seems to be doing the right thing, I'll do
that.
> > + chosen {
> > + stdout-path = "serial0:115200n8";
> > + };
> > +
> > + memory {
> > + reg = <0x20000000 0x8000000>;
> > + };
> > +
> > + clocks {
> > + slow_xtal {
> > + clock-frequency = <32768>;
> > + };
> > +
> > + main_xtal {
> > + clock-frequency = <12000000>;
> > + };
> > + };
> > +
> > + ahb {
> > + apb {
> > + mmc0: mmc@f0008000 {
> > + pinctrl-0 = <
> > + &pinctrl_mmc0_slot0_clk_cmd_dat0
> > + &pinctrl_mmc0_slot0_dat1_3>;
> > + status = "okay";
> > +
> > + slot@0 {
> > + reg = <0>;
> > + bus-width = <4>;
> > + };
> > + };
> > +
> > + usb2: gadget@f803c000 {
> > + status = "okay";
> > + };
> > +
> > + dbgu: serial@fffff200 {
> > + status = "okay";
> > + };
> > +
> > + rtc@fffffeb0 {
> > + status = "okay";
> > + };
> > + };
> > +
> > + usb0: ohci@00600000 {
> > + status = "okay";
> > + num-ports = <3>;
> > + };
> > +
> > + usb1: ehci@00700000 {
> > + status = "okay";
> > + };
> > + };
> > +
> > + leds {
> > + compatible = "gpio-leds";
> > + arietta_led {
> > + label = "arietta_led";
> > + gpios = <&pioB 8 GPIO_ACTIVE_HIGH>; /* PB8 */
> > + linux,default-trigger = "heartbeat";
> > + };
> > + };
> > +};
> >
>
>
> --
> Nicolas Ferre
--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
