Hi, This series was part of a bigger one[1], which was split into smaller ones as asked by Ezequiel[2].
The support is added into the existing pxa3xx nand controller. Some additions were done in order to get this controller working: - Support for a non mandatory ECC clock has been added. - The Berlin nand controller needs to poll the status register. - Sequences of commands are quite different in order to perform write operation. Based on [3]. [1] https://lkml.org/lkml/2015/5/11/495 [2] https://lkml.org/lkml/2015/5/16/309 [3] https://lkml.org/lkml/2015/6/2/471 Antoine Tenart (7): mtd: pxa3xx_nand: add a non mandatory ECC clock Documentation: bindings: document the clocks for pxa3xx-nand mtd: pxa3xx_nand: add support for the Marvell Berlin nand controller Documentation: bindings: add the Berlin nand controller compatible mtd: nand: let Marvell Berlin SoCs select the pxa3xx driver ARM: berlin: add BG2Q node for the nand ARM: berlin: enable flash on the BG2Q DMP .../devicetree/bindings/mtd/pxa3xx-nand.txt | 5 + arch/arm/boot/dts/berlin2q-marvell-dmp.dts | 25 +++ arch/arm/boot/dts/berlin2q.dtsi | 13 ++ drivers/mtd/nand/Kconfig | 4 +- drivers/mtd/nand/pxa3xx_nand.c | 214 +++++++++++++++++++-- 5 files changed, 240 insertions(+), 21 deletions(-) -- 2.4.2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
