Sure thanks :-) Sergio Tanzilli
On 4 June 2015 at 10:01, Nicolas Ferre <[email protected]> wrote: > Le 03/06/2015 14:24, Alexandre Belloni a écrit : >> Add a minimum Device Tree for Acme Arietta G25. >> http://acme.systems/arietta >> >> Signed-off-by: Alexandre Belloni <[email protected]> >> Cc: Sergio Tanzilli <[email protected]> > > BTW Sergio, can I add your "Acked-by" tag? > > Bye, > >> --- >> arch/arm/boot/dts/Makefile | 1 + >> arch/arm/boot/dts/at91-ariettag25.dts | 79 >> +++++++++++++++++++++++++++++++++++ >> 2 files changed, 80 insertions(+) >> create mode 100644 arch/arm/boot/dts/at91-ariettag25.dts >> >> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile >> index 8c3da289a00b..b224a3a56f09 100644 >> --- a/arch/arm/boot/dts/Makefile >> +++ b/arch/arm/boot/dts/Makefile >> @@ -31,6 +31,7 @@ dtb-$(CONFIG_SOC_SAM_V4_V5) += \ >> at91sam9n12ek.dtb \ >> at91sam9rlek.dtb \ >> at91-ariag25.dtb \ >> + at91-ariettag25.dtb \ >> at91-cosino_mega2560.dtb \ >> at91-kizboxmini.dtb \ >> at91sam9g15ek.dtb \ >> diff --git a/arch/arm/boot/dts/at91-ariettag25.dts >> b/arch/arm/boot/dts/at91-ariettag25.dts >> new file mode 100644 >> index 000000000000..c514502081d2 >> --- /dev/null >> +++ b/arch/arm/boot/dts/at91-ariettag25.dts >> @@ -0,0 +1,79 @@ >> +/* >> + * Device Tree file for Arietta G25 >> + * This device tree is minimal, to activate more peripherals, see: >> + * http://dts.acmesystems.it/arietta/ >> + */ >> +/dts-v1/; >> +#include "at91sam9g25.dtsi" >> +/ { >> + model = "Acme Systems Arietta G25"; >> + compatible = "acme,ariettag25", "atmel,at91sam9x5", "atmel,at91sam9"; >> + >> + aliases { >> + serial0 = &dbgu; >> + }; >> + >> + chosen { >> + stdout-path = "serial0:115200n8"; >> + }; >> + >> + memory { >> + reg = <0x20000000 0x8000000>; >> + }; >> + >> + clocks { >> + slow_xtal { >> + clock-frequency = <32768>; >> + }; >> + >> + main_xtal { >> + clock-frequency = <12000000>; >> + }; >> + }; >> + >> + ahb { >> + apb { >> + mmc0: mmc@f0008000 { >> + pinctrl-0 = < >> + &pinctrl_mmc0_slot0_clk_cmd_dat0 >> + &pinctrl_mmc0_slot0_dat1_3>; >> + status = "okay"; >> + >> + slot@0 { >> + reg = <0>; >> + bus-width = <4>; >> + }; >> + }; >> + >> + usb2: gadget@f803c000 { >> + status = "okay"; >> + }; >> + >> + dbgu: serial@fffff200 { >> + status = "okay"; >> + }; >> + >> + rtc@fffffeb0 { >> + status = "okay"; >> + }; >> + }; >> + >> + usb0: ohci@00600000 { >> + status = "okay"; >> + num-ports = <3>; >> + }; >> + >> + usb1: ehci@00700000 { >> + status = "okay"; >> + }; >> + }; >> + >> + leds { >> + compatible = "gpio-leds"; >> + arietta_led { >> + label = "arietta_led"; >> + gpios = <&pioB 8 GPIO_ACTIVE_HIGH>; /* PB8 */ >> + linux,default-trigger = "heartbeat"; >> + }; >> + }; >> +}; >> > > > -- > Nicolas Ferre -- Sergio Tanzilli [email protected] Acme Systems srl http://www.acmesystems.it -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
