SDMA uses different firmware scripts per device type and per
direction, but only one script per channel may be used at a time.
By moving the call to sdma_get_pc() into get_context, it will
be called any time the dma direction may change.

Then there is no need to store multiple script addresses, so those
may be removed from struct sdma_channel.

We also add an error message should setting the script fail to
find a valid script address.

Signed-off-by: Joshua Clayton <[email protected]>
---
 drivers/dma/imx-sdma.c | 34 ++++++++++++++++------------------
 1 file changed, 16 insertions(+), 18 deletions(-)

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 7c8703f..fdf88c4 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -257,7 +257,6 @@ struct sdma_channel {
        unsigned int                    period_len;
        struct sdma_buffer_descriptor   *bd;
        dma_addr_t                      bd_phys;
-       unsigned int                    pc_from_device, pc_to_device;
        unsigned long                   flags;
        dma_addr_t                      per_address;
        unsigned long                   event_mask[2];
@@ -688,8 +687,8 @@ static irqreturn_t sdma_int_handler(int irq, void *dev_id)
 /*
  * sets the pc of SDMA script according to the peripheral type
  */
-static void sdma_get_pc(struct sdma_channel *sdmac,
-               enum sdma_peripheral_type peripheral_type)
+static s32 sdma_get_pc(struct sdma_channel *sdmac,
+               enum dma_transfer_direction direction)
 {
        struct sdma_engine *sdma = to_sdma_engine(sdmac);
        int per_2_emi = 0, emi_2_per = 0;
@@ -699,10 +698,7 @@ static void sdma_get_pc(struct sdma_channel *sdmac,
         */
        int per_2_per = 0, emi_2_emi = 0;
 
-       sdmac->pc_from_device = 0;
-       sdmac->pc_to_device = 0;
-
-       switch (peripheral_type) {
+       switch (sdmac->peripheral_type) {
        case IMX_DMATYPE_MEMORY:
                emi_2_emi = sdma->script_addrs->ap_2_ap_addr;
                break;
@@ -774,8 +770,14 @@ static void sdma_get_pc(struct sdma_channel *sdmac,
                break;
        }
 
-       sdmac->pc_from_device = per_2_emi;
-       sdmac->pc_to_device = emi_2_per;
+       switch (direction) {
+       case DMA_MEM_TO_DEV:
+               return emi_2_per;
+       case DMA_DEV_TO_MEM:
+               return per_2_emi;
+       default:
+               return 0;
+       }
 }
 
 static int sdma_load_context(struct sdma_channel *sdmac)
@@ -788,15 +790,13 @@ static int sdma_load_context(struct sdma_channel *sdmac)
        int ret;
        unsigned long flags;
 
-       if (sdmac->direction == DMA_DEV_TO_MEM) {
-               load_address = sdmac->pc_from_device;
-       } else {
-               load_address = sdmac->pc_to_device;
+       load_address = sdma_get_pc(sdmac, sdmac->direction);
+       if (!load_address) {
+               dev_err(sdma->dev, "SDMA channel %d: No dma script found\n",
+                       channel);
+               return -EFAULT;
        }
 
-       if (load_address < 0)
-               return load_address;
-
        dev_dbg(sdma->dev, "load_address = %d\n", load_address);
        dev_dbg(sdma->dev, "wml = 0x%08x\n", (u32)sdmac->watermark_level);
        dev_dbg(sdma->dev, "shp_addr = 0x%08x\n", sdmac->shp_addr);
@@ -867,8 +867,6 @@ static int sdma_config_channel(struct sdma_channel *sdmac)
                break;
        }
 
-       sdma_get_pc(sdmac, sdmac->peripheral_type);
-
        if ((sdmac->peripheral_type != IMX_DMATYPE_MEMORY) &&
                        (sdmac->peripheral_type != IMX_DMATYPE_DSP)) {
                /* Handle multiple event channels differently */
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to