Add interface to allow CBUS access. The functions set_bitmode and
read_pins use control transfers only hence should not interfere
with the serial operation mode.
Signed-off-by: Stefan Agner <ste...@agner.ch>
---
drivers/usb/serial/ftdi_sio.c | 41 +++++++++++++++++++++++++++++++++++++++++
drivers/usb/serial/ftdi_sio.h | 22 ++++++++++++++++++++++
include/linux/usb/ftdi_sio.h | 32 ++++++++++++++++++++++++++++++++
include/linux/usb/serial.h | 2 ++
4 files changed, 97 insertions(+)
create mode 100644 include/linux/usb/ftdi_sio.h
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 4c8b3b8..23a3280 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1384,6 +1384,47 @@ static int change_speed(struct tty_struct *tty, struct
usb_serial_port *port)
return rv;
}
+int ftdi_sio_set_bitmode(struct usb_serial_port *port, u8 bitmask, u8 bitmode)
+{
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+ __u16 urb_value = 0;
+ int rv = 0;
+
+ urb_value = bitmode << 8 | bitmask;
+
+ rv = usb_control_msg(port->serial->dev,
+ usb_sndctrlpipe(port->serial->dev, 0),
+ FTDI_SIO_SET_BITMODE_REQUEST,
+ FTDI_SIO_SET_BITMODE_REQUEST_TYPE,
+ urb_value, priv->interface,
+ NULL, 0, WDR_SHORT_TIMEOUT);
+ return rv;
+}
+EXPORT_SYMBOL(ftdi_sio_set_bitmode);
+
+int ftdi_sio_read_pins(struct usb_serial_port *port, u8 *pins)
+{
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+ int rv;
+ u8 *buf;
+
+ buf = kmalloc(1, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ rv = usb_control_msg(port->serial->dev,
+ usb_rcvctrlpipe(port->serial->dev, 0),
+ FTDI_SIO_READ_PINS_REQUEST,
+ FTDI_SIO_READ_PINS_REQUEST_TYPE,
+ 0, priv->interface,
+ buf, 1, WDR_SHORT_TIMEOUT);
+ *pins = *buf;
+ kfree(buf);
+
+ return rv;
+}
+EXPORT_SYMBOL(ftdi_sio_read_pins);
+
static int write_latency_timer(struct usb_serial_port *port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index ed58c6f..a62eb15 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -35,6 +35,8 @@
#define FTDI_SIO_SET_ERROR_CHAR 7 /* Set the error character */
#define FTDI_SIO_SET_LATENCY_TIMER 9 /* Set the latency timer */
#define FTDI_SIO_GET_LATENCY_TIMER 10 /* Get the latency timer */
+#define FTDI_SIO_SET_BITMODE 11 /* Set the bitmode */
+#define FTDI_SIO_READ_PINS 12 /* Read pins in bitmode */
/* Interface indices for FT2232, FT2232H and FT4232H devices */
#define INTERFACE_A 1
@@ -345,6 +347,26 @@ enum ftdi_sio_baudrate {
*/
/*
+ * FTDI_SIO_SET_BITMODE
+ *
+ * Set the chip's bitbang mode. Used to switch FT232R into CBUS mode.
+ * For details see of the bitbang modes supported by FT232R devices
+ * refer to the FTDI Application Note AN_232R-01.
+ */
+
+#define FTDI_SIO_SET_BITMODE_REQUEST FTDI_SIO_SET_BITMODE
+#define FTDI_SIO_SET_BITMODE_REQUEST_TYPE 0x40
+
+/*
+ * FTDI_SIO_READ_PINS
+ *
+ * Read the current value of the bit mode.
+ */
+
+#define FTDI_SIO_READ_PINS_REQUEST FTDI_SIO_READ_PINS
+#define FTDI_SIO_READ_PINS_REQUEST_TYPE 0xC0
+
+/*
* FTDI_SIO_SET_EVENT_CHAR
*
* Set the special event character for the specified communications port.
diff --git a/include/linux/usb/ftdi_sio.h b/include/linux/usb/ftdi_sio.h
new file mode 100644
index 0000000..8e1a292
--- /dev/null
+++ b/include/linux/usb/ftdi_sio.h
@@ -0,0 +1,32 @@
+/*
+ * Interface for FTDI SIO driver used by CBUS GPIO driver
+ *
+ * Copyright 2015 Stefan Agner
+ *
+ * Author: Stefan Agner <ste...@agner.ch>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __LINUX_USB_FTDI_SIO_H
+#define __LINUX_USB_FTDI_SIO_H
+
+#include <linux/usb/serial.h>
+
+/* MPSSE bitbang modes */
+enum ftdi_mpsse_mode {
+ /* switch off bitbang mode, back to regular serial/FIFO */
+ BITMODE_RESET = 0x00,
+
+ /* Bitbang on CBUS pins of R-type chips, configure in EEPROM before */
+ BITMODE_CBUS = 0x20,
+};
+
+int ftdi_sio_set_bitmode(struct usb_serial_port *port, u8 bitmask, u8 bitmode);
+int ftdi_sio_read_pins(struct usb_serial_port *port, u8 *pins);
+
+#endif /* __LINUX_USB_FTDI_SIO_H */
+
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index 704a1ab..d710656 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -17,6 +17,8 @@
#include <linux/mutex.h>
#include <linux/serial.h>
#include <linux/sysrq.h>
+#include <linux/tty.h>
+#include <linux/usb.h>
#include <linux/kfifo.h>
/* The maximum number of ports one device can grab at once */
--
2.4.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
