From: Vignesh R <[email protected]> On DRA72 EVM, cpsw slave1 is muxed with VIN2A, hence switch to cpsw slave0 for ethernet. Add gpio hog entry to pcf_gpio_21 in order to select cpsw slave0.
Signed-off-by: Vignesh R <[email protected]> Signed-off-by: Mugunthan V N <[email protected]> --- arch/arm/boot/dts/dra72-evm.dts | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index ce0390f..b05d123 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -274,6 +274,12 @@ interrupts = <11 IRQ_TYPE_EDGE_FALLING>; interrupt-controller; #interrupt-cells = <2>; + + cpsw_sel_s0 { + gpio-hog; + gpios = <4 GPIO_ACTIVE_HIGH>; + output-low; + }; }; }; @@ -481,9 +487,10 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&cpsw_default>; pinctrl-1 = <&cpsw_sleep>; + slaves = <1>; }; -&cpsw_emac1 { +&cpsw_emac0 { phy_id = <&davinci_mdio>, <3>; phy-mode = "rgmii"; }; @@ -492,7 +499,6 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; - active_slave = <1>; }; &dcan1 { -- 2.4.2.387.gf86f31a -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in Please read the FAQ at http://www.tux.org/lkml/
