On Tue 2015-05-12 12:11:33, Anda-Maria Nicolae wrote:
> Replace of_property_read_u32() with device_property_read_u32(), which is a
> wrapper over ACPI and device tree enumeration methods.
> When ACPI enumeration is used, automode is not supported. Therefore,
> bq2415x_charger does not update its input current automatically, depending
> on the USB port type that is connected to. Input current may be updated via
> sysfs.
>
> Signed-off-by: Anda-Maria Nicolae <[email protected]>
> ---
> drivers/power/bq2415x_charger.c | 73
> +++++++++++++++++++++++++++++----------
> 1 file changed, 55 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/power/bq2415x_charger.c b/drivers/power/bq2415x_charger.c
> index 2cf8ec7..e98dcb6 100644
> --- a/drivers/power/bq2415x_charger.c
> +++ b/drivers/power/bq2415x_charger.c
> @@ -35,6 +35,7 @@
> #include <linux/idr.h>
> #include <linux/i2c.h>
> #include <linux/slab.h>
> +#include <linux/acpi.h>
>
> #include <linux/power/bq2415x_charger.h>
>
> @@ -1530,13 +1531,14 @@ static int bq2415x_probe(struct i2c_client *client,
> {
> int ret;
> int num;
> - char *name;
> + char *name = NULL;
> struct bq2415x_device *bq;
Why?
> @@ -1547,7 +1549,14 @@ static int bq2415x_probe(struct i2c_client *client,
> if (num < 0)
> return num;
>
> - name = kasprintf(GFP_KERNEL, "%s-%d", id->name, num);
> + if (id) {
> + name = kasprintf(GFP_KERNEL, "%s-%d", id->name, num);
> + } else if (ACPI_HANDLE(&client->dev)) {
> + acpi_id =
> + acpi_match_device(client->dev.driver->acpi_match_table,
> + &client->dev);
> + name = kasprintf(GFP_KERNEL, "%s-%d", acpi_id->id, num);
> + }
You have both branches covered.
Pavel
> if (!name) {
> dev_err(&client->dev, "failed to allocate device name\n");
> ret = -ENOMEM;
> @@ -1573,7 +1582,7 @@ static int bq2415x_probe(struct i2c_client *client,
> ret = -EPROBE_DEFER;
> goto error_2;
> }
> - } else if (pdata->notify_device) {
> + } else if (pdata && pdata->notify_device) {
> bq->notify_psy = power_supply_get_by_name(pdata->notify_device);
> } else {
> bq->notify_psy = NULL;
> @@ -1583,36 +1592,45 @@ static int bq2415x_probe(struct i2c_client *client,
>
> bq->id = num;
> bq->dev = &client->dev;
> - bq->chip = id->driver_data;
> + if (id)
> + bq->chip = id->driver_data;
> + else if (ACPI_HANDLE(bq->dev))
> + bq->chip = acpi_id->driver_data;
> bq->name = name;
> bq->mode = BQ2415X_MODE_OFF;
> bq->reported_mode = BQ2415X_MODE_OFF;
> bq->autotimer = 0;
> bq->automode = 0;
>
> - if (np) {
> - ret = of_property_read_u32(np, "ti,current-limit",
> - &bq->init_data.current_limit);
> + if (np || ACPI_HANDLE(bq->dev)) {
> + ret = device_property_read_u32(bq->dev,
> + "ti,current-limit",
> + &bq->init_data.current_limit);
> if (ret)
> goto error_3;
> - ret = of_property_read_u32(np, "ti,weak-battery-voltage",
> - &bq->init_data.weak_battery_voltage);
> + ret = device_property_read_u32(bq->dev,
> + "ti,weak-battery-voltage",
> + &bq->init_data.weak_battery_voltage);
> if (ret)
> goto error_3;
> - ret = of_property_read_u32(np, "ti,battery-regulation-voltage",
> + ret = device_property_read_u32(bq->dev,
> + "ti,battery-regulation-voltage",
> &bq->init_data.battery_regulation_voltage);
> if (ret)
> goto error_3;
> - ret = of_property_read_u32(np, "ti,charge-current",
> - &bq->init_data.charge_current);
> + ret = device_property_read_u32(bq->dev,
> + "ti,charge-current",
> + &bq->init_data.charge_current);
> if (ret)
> goto error_3;
> - ret = of_property_read_u32(np, "ti,termination-current",
> - &bq->init_data.termination_current);
> + ret = device_property_read_u32(bq->dev,
> + "ti,termination-current",
> + &bq->init_data.termination_current);
> if (ret)
> goto error_3;
> - ret = of_property_read_u32(np, "ti,resistor-sense",
> - &bq->init_data.resistor_sense);
> + ret = device_property_read_u32(bq->dev,
> + "ti,resistor-sense",
> + &bq->init_data.resistor_sense);
> if (ret)
> goto error_3;
> } else {
> @@ -1728,9 +1746,28 @@ static const struct i2c_device_id
> bq2415x_i2c_id_table[] = {
> };
> MODULE_DEVICE_TABLE(i2c, bq2415x_i2c_id_table);
>
> +static const struct acpi_device_id bq2415x_i2c_acpi_match[] = {
> + { "BQ2415X", BQUNKNOWN },
> + { "BQ241500", BQ24150 },
> + { "BQA24150", BQ24150A },
> + { "BQ241510", BQ24151 },
> + { "BQA24151", BQ24151A },
> + { "BQ241520", BQ24152 },
> + { "BQ241530", BQ24153 },
> + { "BQA24153", BQ24153A },
> + { "BQ241550", BQ24155 },
> + { "BQ241560", BQ24156 },
> + { "BQA24156", BQ24156A },
> + { "BQS24157", BQ24157S },
> + { "BQ241580", BQ24158 },
> + {},
> +};
> +MODULE_DEVICE_TABLE(acpi, bq2415x_i2c_acpi_match);
> +
> static struct i2c_driver bq2415x_driver = {
> .driver = {
> .name = "bq2415x-charger",
> + .acpi_match_table = ACPI_PTR(bq2415x_i2c_acpi_match),
> },
> .probe = bq2415x_probe,
> .remove = bq2415x_remove,
> --
> 1.7.9.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures)
http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
