On some BYT PLatform the PWM is controlled using CRC PMIC. Add a lookup
entry for the same to be used by the consumer (Intel GFX)
CC: Samuel Ortiz <sa...@linux.intel.com>
Cc: Linus Walleij <linus.wall...@linaro.org>
Cc: Alexandre Courbot <gnu...@gmail.com>
Cc: Thierry Reding <thierry.red...@gmail.com>
Acked-by: Lee Jones <lee.jo...@linaro.org>
Tested-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
Signed-off-by: Shobhit Kumar <shobhit.ku...@intel.com>
---
v2: Remove the lookup table on driver unload (Thierry)
v3: Correct the subject line (Lee jones)
drivers/mfd/intel_soc_pmic_core.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/mfd/intel_soc_pmic_core.c
b/drivers/mfd/intel_soc_pmic_core.c
index f3d918e..a00ddd9 100644
--- a/drivers/mfd/intel_soc_pmic_core.c
+++ b/drivers/mfd/intel_soc_pmic_core.c
@@ -25,6 +25,7 @@
#include <linux/regmap.h>
#include <linux/mfd/intel_soc_pmic.h>
#include <linux/gpio/machine.h>
+#include <linux/pwm.h>
#include "intel_soc_pmic_core.h"
/* Lookup table for the Panel Enable/Disable line as GPIO signals */
@@ -37,6 +38,11 @@ static struct gpiod_lookup_table panel_gpio_table = {
},
};
+/* PWM consumed by the Intel GFX */
+static struct pwm_lookup crc_pwm_lookup[] = {
+ PWM_LOOKUP("crystal_cove_pwm", 0, "0000:00:02.0", "pwm_backlight", 0,
PWM_POLARITY_NORMAL),
+};
+
static int intel_soc_pmic_find_gpio_irq(struct device *dev)
{
struct gpio_desc *desc;
@@ -99,6 +105,9 @@ static int intel_soc_pmic_i2c_probe(struct i2c_client *i2c,
/* Add lookup table binding for Panel Control to the GPIO Chip */
gpiod_add_lookup_table(&panel_gpio_table);
+ /* Add lookup table for crc-pwm */
+ pwm_add_table(crc_pwm_lookup, ARRAY_SIZE(crc_pwm_lookup));
+
ret = mfd_add_devices(dev, -1, config->cell_dev,
config->n_cell_devs, NULL, 0,
regmap_irq_get_domain(pmic->irq_chip_data));
@@ -121,6 +130,9 @@ static int intel_soc_pmic_i2c_remove(struct i2c_client *i2c)
/* Remove lookup table for Panel Control from the GPIO Chip */
gpiod_remove_lookup_table(&panel_gpio_table);
+ /* remove crc-pwm lookup table */
+ pwm_remove_table(crc_pwm_lookup, ARRAY_SIZE(crc_pwm_lookup));
+
mfd_remove_devices(&i2c->dev);
return 0;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
