On 30.06.2015 02:26, Bartlomiej Zolnierkiewicz wrote:
> From: Thomas Abraham <[email protected]>
>
> For Exynos5250 platforms, add CPU operating points and CPU
> regulator supply properties for migrating from Exynos specific
> cpufreq driver to using generic cpufreq driver.
>
> Changes by Bartlomiej:
> - split Exynos5250 support from the original patch
> - added CPU regulator supply property for Google Spring board
>
> Cc: Kukjin Kim <[email protected]>
> Cc: Doug Anderson <[email protected]>
> Cc: Javier Martinez Canillas <[email protected]>
> Cc: Andreas Faerber <[email protected]>
> Cc: Sachin Kamat <[email protected]>
> Signed-off-by: Thomas Abraham <[email protected]>
> Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
> ---
> arch/arm/boot/dts/exynos5250-arndale.dts | 4 ++++
> arch/arm/boot/dts/exynos5250-smdk5250.dts | 4 ++++
> arch/arm/boot/dts/exynos5250-snow.dts | 4 ++++
> arch/arm/boot/dts/exynos5250-spring.dts | 4 ++++
> arch/arm/boot/dts/exynos5250.dtsi | 22 ++++++++++++++++++++++
> 5 files changed, 38 insertions(+)
>
> diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts
> b/arch/arm/boot/dts/exynos5250-arndale.dts
> index 7e728a1..c64cec3 100644
> --- a/arch/arm/boot/dts/exynos5250-arndale.dts
> +++ b/arch/arm/boot/dts/exynos5250-arndale.dts
> @@ -560,3 +560,7 @@
> status = "okay";
> samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
> };
> +
> +&cpu0 {
> + cpu0-supply = <&buck2_reg>;
> +};
The patch itself looks good, but:
1. Please remove CC-tag with the old-non-working email address of Sachin
Kamat.
2. Could you put the new cpu node in alphabetical order (at least in DTS
where they are already ordered)?
Best regards,
Krzysztof
> diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts
> b/arch/arm/boot/dts/exynos5250-smdk5250.dts
> index 4fe186d..4b9f9ce 100644
> --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
> +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
> @@ -414,6 +414,10 @@
> };
> };
>
> +&cpu0 {
> + cpu0-supply = <&buck2_reg>;
> +};
> +
> &pinctrl_0 {
> max77686_irq: max77686-irq {
> samsung,pins = "gpx3-2";
> diff --git a/arch/arm/boot/dts/exynos5250-snow.dts
> b/arch/arm/boot/dts/exynos5250-snow.dts
> index b7f4122..b23deda 100644
> --- a/arch/arm/boot/dts/exynos5250-snow.dts
> +++ b/arch/arm/boot/dts/exynos5250-snow.dts
> @@ -277,6 +277,10 @@
> vdd_pll-supply = <&ldo8_reg>;
> };
>
> +&cpu0 {
> + cpu0-supply = <&buck2_reg>;
> +};
> +
> &i2c_0 {
> status = "okay";
> samsung,i2c-sda-delay = <100>;
> diff --git a/arch/arm/boot/dts/exynos5250-spring.dts
> b/arch/arm/boot/dts/exynos5250-spring.dts
> index d03f9b8..38b54d9 100644
> --- a/arch/arm/boot/dts/exynos5250-spring.dts
> +++ b/arch/arm/boot/dts/exynos5250-spring.dts
> @@ -99,6 +99,10 @@
> vdd_pll-supply = <&ldo8_reg>;
> };
>
> +&cpu0 {
> + cpu0-supply = <&buck2_reg>;
> +};
> +
> &i2c_0 {
> status = "okay";
> samsung,i2c-sda-delay = <100>;
> diff --git a/arch/arm/boot/dts/exynos5250.dtsi
> b/arch/arm/boot/dts/exynos5250.dtsi
> index bf9bee6..0c7ef12 100644
> --- a/arch/arm/boot/dts/exynos5250.dtsi
> +++ b/arch/arm/boot/dts/exynos5250.dtsi
> @@ -63,6 +63,28 @@
> compatible = "arm,cortex-a15";
> reg = <0>;
> clock-frequency = <1700000000>;
> + clocks = <&clock CLK_ARM_CLK>;
> + clock-names = "cpu";
> + clock-latency = <140000>;
> +
> + operating-points = <
> + 1700000 1300000
> + 1600000 1250000
> + 1500000 1225000
> + 1400000 1200000
> + 1300000 1150000
> + 1200000 1125000
> + 1100000 1100000
> + 1000000 1075000
> + 900000 1050000
> + 800000 1025000
> + 700000 1012500
> + 600000 1000000
> + 500000 975000
> + 400000 950000
> + 300000 937500
> + 200000 925000
> + >;
> cooling-min-level = <15>;
> cooling-max-level = <9>;
> #cooling-cells = <2>; /* min followed by max */
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
