From: Noam Camus <[email protected]> Always add UPF_FIXED_TYPE to flags so autoconf() will be skipped. We do that since autoconf() performs many writes to LCR that cause BUSY interrupt. The problem with such interrupt is that driver is not yet called to request_irq() and generic IRQ subsystem will mask the UART line.
Signed-off-by: Noam Camus <[email protected]> --- drivers/tty/serial/8250/8250_dw.c | 8 ++++++++ 1 files changed, 8 insertions(+), 0 deletions(-) diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index 1a57105..620f983 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -362,6 +362,14 @@ static int dw8250_probe_of(struct uart_port *p, if (has_ucv) dw8250_setup_port(up); + /* Writing to LCR may cause BUSY interrupt before we + * register the IRQ line. + * Currently autoconf() uses several writes to LCR. + * In order to avoid calling to autoconf() always add + * following flag. + */ + p->flags |= UPF_FIXED_TYPE; + /* if we have a valid fifosize, try hooking up DMA here */ if (p->fifosize) { up->dma = &data->dma; -- 1.7.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
