On Tue, Jul 21, 2015 at 04:34:52PM -0700, Andrew Morton wrote:
> On Sun, 19 Jul 2015 15:31:15 +0300 Vladimir Davydov <[email protected]>
> wrote:
>
> > Knowing the portion of memory that is not used by a certain application
> > or memory cgroup (idle memory) can be useful for partitioning the system
> > efficiently, e.g. by setting memory cgroup limits appropriately.
> > Currently, the only means to estimate the amount of idle memory provided
> > by the kernel is /proc/PID/{clear_refs,smaps}: the user can clear the
> > access bit for all pages mapped to a particular process by writing 1 to
> > clear_refs, wait for some time, and then count smaps:Referenced.
> > However, this method has two serious shortcomings:
> >
> > - it does not count unmapped file pages
> > - it affects the reclaimer logic
> >
> > To overcome these drawbacks, this patch introduces two new page flags,
> > Idle and Young, and a new proc file, /proc/kpageidle. A page's Idle flag
> > can only be set from userspace by setting bit in /proc/kpageidle at the
> > offset corresponding to the page, and it is cleared whenever the page is
> > accessed either through page tables (it is cleared in page_referenced()
> > in this case) or using the read(2) system call (mark_page_accessed()).
> > Thus by setting the Idle flag for pages of a particular workload, which
> > can be found e.g. by reading /proc/PID/pagemap, waiting for some time to
> > let the workload access its working set, and then reading the kpageidle
> > file, one can estimate the amount of pages that are not used by the
> > workload.
> >
> > The Young page flag is used to avoid interference with the memory
> > reclaimer. A page's Young flag is set whenever the Access bit of a page
> > table entry pointing to the page is cleared by writing to kpageidle. If
> > page_referenced() is called on a Young page, it will add 1 to its return
> > value, therefore concealing the fact that the Access bit was cleared.
> >
> > Note, since there is no room for extra page flags on 32 bit, this
> > feature uses extended page flags when compiled on 32 bit.
> >
> > ...
> >
> >
> > ...
> >
> > +static void kpageidle_clear_pte_refs(struct page *page)
> > +{
> > + struct rmap_walk_control rwc = {
> > + .rmap_one = kpageidle_clear_pte_refs_one,
> > + .anon_lock = page_lock_anon_vma_read,
> > + };
>
> I think this can be static const, since `arg' is unused? That would
> save some cycles and stack.
Good catch, thanks.
>
> > + bool need_lock;
> > +
> > + if (!page_mapped(page) ||
> > + !page_rmapping(page))
> > + return;
> > +
> > + need_lock = !PageAnon(page) || PageKsm(page);
> > + if (need_lock && !trylock_page(page))
>
> Oh. So the feature is a bit unreliable.
>
> I'm not immediately seeing anything which would prevent us from using
> plain old lock_page() here. What's going on?
A page may be locked for quite a long period of time, e.g.
truncate_inode_pages_range() may wait until a page writeback finishes
under the page lock. Instead of stalling kpageidle scan, we'd better
move on to the next page. Of course, the result won't be 100% accurate.
In fact, it isn't accurate anyway, because we skip isolated pages,
neither can it possibly be 100% accurate, because the scan itself is not
instant so that while we are performing it the system usage pattern
might change. This new API is only supposed to give a good estimate of
memory usage pattern, which could be used as a hint for adjusting the
system configuration to improve performance.
>
> > + return;
> > +
> > + rmap_walk(page, &rwc);
> > +
> > + if (need_lock)
> > + unlock_page(page);
> > +}
> > +
> > +static ssize_t kpageidle_read(struct file *file, char __user *buf,
> > + size_t count, loff_t *ppos)
> > +{
> > + u64 __user *out = (u64 __user *)buf;
> > + struct page *page;
> > + unsigned long pfn, end_pfn;
> > + ssize_t ret = 0;
> > + u64 idle_bitmap = 0;
> > + int bit;
> > +
> > + if (*ppos & KPMMASK || count & KPMMASK)
> > + return -EINVAL;
>
> Interface requires 8-byte aligned offset and size.
>
> > + pfn = *ppos * BITS_PER_BYTE;
> > + if (pfn >= max_pfn)
> > + return 0;
> > +
> > + end_pfn = pfn + count * BITS_PER_BYTE;
> > + if (end_pfn > max_pfn)
> > + end_pfn = ALIGN(max_pfn, KPMBITS);
>
> So we lose up to 63 pages. Presumably max_pfn is well enough aligned
> for this to not matter, dunno.
ALIGN(x, a) resolves to ((x + a - 1) & ~(a - 1)), which is >= x, so we
shouldn't loose anything.
>
> > + for (; pfn < end_pfn; pfn++) {
> > + bit = pfn % KPMBITS;
> > + page = kpageidle_get_page(pfn);
> > + if (page) {
> > + if (page_is_idle(page)) {
> > + /*
> > + * The page might have been referenced via a
> > + * pte, in which case it is not idle. Clear
> > + * refs and recheck.
> > + */
> > + kpageidle_clear_pte_refs(page);
> > + if (page_is_idle(page))
> > + idle_bitmap |= 1ULL << bit;
>
> I don't understand what's going on here. More details, please?
The output is a bitmap, which is stored as an array of 8-byte elements,
where byte order within each word is native, i.e. if page at pfn #i is
idle we need to set bit #i%64 of element #i/64 of the array. I'll
reflect this in the documentation.
>
> > + }
> > + put_page(page);
> > + }
> > + if (bit == KPMBITS - 1) {
> > + if (put_user(idle_bitmap, out)) {
> > + ret = -EFAULT;
> > + break;
> > + }
> > + idle_bitmap = 0;
> > + out++;
> > + }
> > + }
> > +
> > + *ppos += (char __user *)out - buf;
> > + if (!ret)
> > + ret = (char __user *)out - buf;
> > + return ret;
> > +}
> > +
> > +static ssize_t kpageidle_write(struct file *file, const char __user *buf,
> > + size_t count, loff_t *ppos)
> > +{
> > + const u64 __user *in = (const u64 __user *)buf;
> > + struct page *page;
> > + unsigned long pfn, end_pfn;
> > + ssize_t ret = 0;
> > + u64 idle_bitmap = 0;
> > + int bit;
> > +
> > + if (*ppos & KPMMASK || count & KPMMASK)
> > + return -EINVAL;
> > +
> > + pfn = *ppos * BITS_PER_BYTE;
> > + if (pfn >= max_pfn)
> > + return -ENXIO;
> > +
> > + end_pfn = pfn + count * BITS_PER_BYTE;
> > + if (end_pfn > max_pfn)
> > + end_pfn = ALIGN(max_pfn, KPMBITS);
> > +
> > + for (; pfn < end_pfn; pfn++) {
> > + bit = pfn % KPMBITS;
> > + if (bit == 0) {
> > + if (get_user(idle_bitmap, in)) {
> > + ret = -EFAULT;
> > + break;
> > + }
> > + in++;
> > + }
> > + if (idle_bitmap >> bit & 1) {
>
> Hate it when I have to go look up a C precedence table. This is
>
> if ((idle_bitmap >> bit) & 1) {
Fixed.
Here goes the incremental patch with all the fixes:
---
diff --git a/fs/proc/page.c b/fs/proc/page.c
index 7ff7cba8617b..9daa6e92450f 100644
--- a/fs/proc/page.c
+++ b/fs/proc/page.c
@@ -362,7 +362,11 @@ static int kpageidle_clear_pte_refs_one(struct page *page,
static void kpageidle_clear_pte_refs(struct page *page)
{
- struct rmap_walk_control rwc = {
+ /*
+ * Since rwc.arg is unused, rwc is effectively immutable, so we
+ * can make it static const to save some cycles and stack.
+ */
+ static const struct rmap_walk_control rwc = {
.rmap_one = kpageidle_clear_pte_refs_one,
.anon_lock = page_lock_anon_vma_read,
};
@@ -376,7 +380,7 @@ static void kpageidle_clear_pte_refs(struct page *page)
if (need_lock && !trylock_page(page))
return;
- rmap_walk(page, &rwc);
+ rmap_walk(page, (struct rmap_walk_control *)&rwc);
if (need_lock)
unlock_page(page);
@@ -466,7 +470,7 @@ static ssize_t kpageidle_write(struct file *file, const
char __user *buf,
}
in++;
}
- if (idle_bitmap >> bit & 1) {
+ if ((idle_bitmap >> bit) & 1) {
page = kpageidle_get_page(pfn);
if (page) {
kpageidle_clear_pte_refs(page);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
