The watchdog, the reset controller, the RTC and the shutdown controller
need the slow clock, add it where necessary.

Signed-off-by: Alexandre Belloni <[email protected]>
---
Cc: Jean-Christophe Plagniol-Villard <[email protected]>
 arch/arm/boot/dts/sama5d3.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 9e2444b07bce..6e2cfef98ff2 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -1261,11 +1261,13 @@
                        rstc@fffffe00 {
                                compatible = "atmel,at91sam9g45-rstc";
                                reg = <0xfffffe00 0x10>;
+                               clocks = <&clk32k>;
                        };
 
                        shutdown-controller@fffffe10 {
                                compatible = "atmel,at91sam9x5-shdwc";
                                reg = <0xfffffe10 0x10>;
+                               clocks = <&clk32k>;
                        };
 
                        pit: timer@fffffe30 {
@@ -1279,6 +1281,7 @@
                                compatible = "atmel,at91sam9260-wdt";
                                reg = <0xfffffe40 0x10>;
                                interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>;
+                               clocks = <&clk32k>;
                                atmel,watchdog-type = "hardware";
                                atmel,reset-type = "all";
                                atmel,dbg-halt;
@@ -1315,6 +1318,7 @@
                                compatible = "atmel,at91rm9200-rtc";
                                reg = <0xfffffeb0 0x30>;
                                interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+                               clocks = <&clk32k>;
                        };
                };
 
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to