Le 30/07/2015 13:55, Nicolas Ferre a écrit : > From: Ludovic Desroches <[email protected]> > > Only the basic support for this new Atmel Cortex-A5 SoC. A subset of the > peripherals is setup to allow booting. > IRQ, clocks, USB, crypto, timers, rtc, ethernet, spi/i2c and > uart/usart peripheral nodes are added. > > Signed-off-by: Ludovic Desroches <[email protected]> > Signed-off-by: Nicolas Ferre <[email protected]> > --- > > Changes in v3: > - remove sd/mmc nodes > - remove generated clock nodes
Oh I forgot about this: - corrected the DMA HW handler interfaces for SHA and AES thanks to Leilei! Bye, > > Changes in v2: > - fix sdmmc clocks and memory range > - add flexcom and audio Class D amplifier peripheral clock definitions > - add qspi peripheral clock definitions > - add more generated clock definitions > - fix DMA definitions for crypto peripherals > - add spi, i2c and rtc nodes > > arch/arm/boot/dts/sama5d2.dtsi | 925 > +++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 925 insertions(+) > create mode 100644 arch/arm/boot/dts/sama5d2.dtsi > > diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi > new file mode 100644 > index 000000000000..f39258fa3815 > --- /dev/null > +++ b/arch/arm/boot/dts/sama5d2.dtsi > @@ -0,0 +1,925 @@ > +/* > + * sama5d2.dtsi - Device Tree Include file for SAMA5D2 family SoC > + * > + * Copyright (C) 2015 Atmel, > + * 2015 Ludovic Desroches <[email protected]> > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual > + * licensing only applies to this file, and not this project as a > + * whole. > + * > + * a) This file is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of the > + * License, or (at your option) any later version. > + * > + * This file is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * Or, alternatively, > + * > + * b) Permission is hereby granted, free of charge, to any person > + * obtaining a copy of this software and associated documentation > + * files (the "Software"), to deal in the Software without > + * restriction, including without limitation the rights to use, > + * copy, modify, merge, publish, distribute, sublicense, and/or > + * sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following > + * conditions: > + * > + * The above copyright notice and this permission notice shall be > + * included in all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > + * OTHER DEALINGS IN THE SOFTWARE. > + */ > + > +#include "skeleton.dtsi" > +#include <dt-bindings/dma/at91.h> > +#include <dt-bindings/interrupt-controller/irq.h> > +#include <dt-bindings/clock/at91.h> > + > +/ { > + model = "Atmel SAMA5D2 family SoC"; > + compatible = "atmel,sama5d2"; > + interrupt-parent = <&aic>; > + > + aliases { > + serial0 = &uart1; > + serial1 = &uart3; > + tcb0 = &tcb0; > + tcb1 = &tcb1; > + }; > + > + cpus { > + #address-cells = <1>; > + #size-cells = <0>; > + > + cpu@0 { > + device_type = "cpu"; > + compatible = "arm,cortex-a5"; > + reg = <0>; > + next-level-cache = <&L2>; > + }; > + }; > + > + memory { > + reg = <0x20000000 0x20000000>; > + }; > + > + clocks { > + slow_xtal: slow_xtal { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <0>; > + }; > + > + main_xtal: main_xtal { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <0>; > + }; > + > + adc_op_clk: adc_op_clk{ > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <1000000>; > + }; > + }; > + > + ns_sram: sram@00200000 { > + compatible = "mmio-sram"; > + reg = <0x00200000 0x20000>; > + }; > + > + ahb { > + compatible = "simple-bus"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + usb0: gadget@00300000 { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "atmel,sama5d3-udc"; > + reg = <0x00300000 0x100000 > + 0xfc02c000 0x400>; > + interrupts = <42 IRQ_TYPE_LEVEL_HIGH 2>; > + clocks = <&udphs_clk>, <&utmi>; > + clock-names = "pclk", "hclk"; > + status = "disabled"; > + > + ep0 { > + reg = <0>; > + atmel,fifo-size = <64>; > + atmel,nb-banks = <1>; > + }; > + > + ep1 { > + reg = <1>; > + atmel,fifo-size = <1024>; > + atmel,nb-banks = <3>; > + atmel,can-dma; > + atmel,can-isoc; > + }; > + > + ep2 { > + reg = <2>; > + atmel,fifo-size = <1024>; > + atmel,nb-banks = <3>; > + atmel,can-dma; > + atmel,can-isoc; > + }; > + > + ep3 { > + reg = <3>; > + atmel,fifo-size = <1024>; > + atmel,nb-banks = <2>; > + atmel,can-dma; > + atmel,can-isoc; > + }; > + > + ep4 { > + reg = <4>; > + atmel,fifo-size = <1024>; > + atmel,nb-banks = <2>; > + atmel,can-dma; > + atmel,can-isoc; > + }; > + > + ep5 { > + reg = <5>; > + atmel,fifo-size = <1024>; > + atmel,nb-banks = <2>; > + atmel,can-dma; > + atmel,can-isoc; > + }; > + > + ep6 { > + reg = <6>; > + atmel,fifo-size = <1024>; > + atmel,nb-banks = <2>; > + atmel,can-dma; > + atmel,can-isoc; > + }; > + > + ep7 { > + reg = <7>; > + atmel,fifo-size = <1024>; > + atmel,nb-banks = <2>; > + atmel,can-dma; > + atmel,can-isoc; > + }; > + > + ep8 { > + reg = <8>; > + atmel,fifo-size = <1024>; > + atmel,nb-banks = <2>; > + atmel,can-isoc; > + }; > + > + ep9 { > + reg = <9>; > + atmel,fifo-size = <1024>; > + atmel,nb-banks = <2>; > + atmel,can-isoc; > + }; > + > + ep10 { > + reg = <10>; > + atmel,fifo-size = <1024>; > + atmel,nb-banks = <2>; > + atmel,can-isoc; > + }; > + > + ep11 { > + reg = <11>; > + atmel,fifo-size = <1024>; > + atmel,nb-banks = <2>; > + atmel,can-isoc; > + }; > + > + ep12 { > + reg = <12>; > + atmel,fifo-size = <1024>; > + atmel,nb-banks = <2>; > + atmel,can-isoc; > + }; > + > + ep13 { > + reg = <13>; > + atmel,fifo-size = <1024>; > + atmel,nb-banks = <2>; > + atmel,can-isoc; > + }; > + > + ep14 { > + reg = <14>; > + atmel,fifo-size = <1024>; > + atmel,nb-banks = <2>; > + atmel,can-isoc; > + }; > + > + ep15 { > + reg = <15>; > + atmel,fifo-size = <1024>; > + atmel,nb-banks = <2>; > + atmel,can-isoc; > + }; > + }; > + > + usb1: ohci@00400000 { > + compatible = "atmel,at91rm9200-ohci", "usb-ohci"; > + reg = <0x00400000 0x100000>; > + interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>; > + clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; > + clock-names = "ohci_clk", "hclk", "uhpck"; > + status = "disabled"; > + }; > + > + usb2: ehci@00500000 { > + compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; > + reg = <0x00500000 0x100000>; > + interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>; > + clocks = <&utmi>, <&uhphs_clk>; > + clock-names = "usb_clk", "ehci_clk"; > + status = "disabled"; > + }; > + > + L2: cache-controller@00a00000 { > + compatible = "arm,pl310-cache"; > + reg = <0x00a00000 0x1000>; > + interrupts = <63 IRQ_TYPE_LEVEL_HIGH 4>; > + cache-unified; > + cache-level = <2>; > + }; > + > + apb { > + compatible = "simple-bus"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + ramc0: ramc@f000c000 { > + compatible = "atmel,sama5d3-ddramc"; > + reg = <0xf000c000 0x200>; > + clocks = <&ddrck>, <&mpddr_clk>; > + clock-names = "ddrck", "mpddr"; > + }; > + > + dma0: dma-controller@f0010000 { > + compatible = "atmel,sama5d4-dma"; > + reg = <0xf0010000 0x1000>; > + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>; > + #dma-cells = <1>; > + clocks = <&dma0_clk>; > + clock-names = "dma_clk"; > + }; > + > + pmc: pmc@f0014000 { > + compatible = "atmel,sama5d2-pmc"; > + reg = <0xf0014000 0x160>; > + interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>; > + interrupt-controller; > + #address-cells = <1>; > + #size-cells = <0>; > + #interrupt-cells = <1>; > + > + main_rc_osc: main_rc_osc { > + compatible = > "atmel,at91sam9x5-clk-main-rc-osc"; > + #clock-cells = <0>; > + interrupt-parent = <&pmc>; > + interrupts = <AT91_PMC_MOSCRCS>; > + clock-frequency = <12000000>; > + clock-accuracy = <100000000>; > + }; > + > + main_osc: main_osc { > + compatible = > "atmel,at91rm9200-clk-main-osc"; > + #clock-cells = <0>; > + interrupt-parent = <&pmc>; > + interrupts = <AT91_PMC_MOSCS>; > + clocks = <&main_xtal>; > + }; > + > + main: mainck { > + compatible = > "atmel,at91sam9x5-clk-main"; > + #clock-cells = <0>; > + interrupt-parent = <&pmc>; > + interrupts = <AT91_PMC_MOSCSELS>; > + clocks = <&main_rc_osc &main_osc>; > + }; > + > + plla: pllack { > + compatible = "atmel,sama5d3-clk-pll"; > + #clock-cells = <0>; > + interrupt-parent = <&pmc>; > + interrupts = <AT91_PMC_LOCKA>; > + clocks = <&main>; > + reg = <0>; > + atmel,clk-input-range = <12000000 > 12000000>; > + #atmel,pll-clk-output-range-cells = <4>; > + atmel,pll-clk-output-ranges = > <600000000 1200000000 0 0>; > + }; > + > + plladiv: plladivck { > + compatible = > "atmel,at91sam9x5-clk-plldiv"; > + #clock-cells = <0>; > + clocks = <&plla>; > + }; > + > + utmi: utmick { > + compatible = > "atmel,at91sam9x5-clk-utmi"; > + #clock-cells = <0>; > + interrupt-parent = <&pmc>; > + interrupts = <AT91_PMC_LOCKU>; > + clocks = <&main>; > + }; > + > + mck: masterck { > + compatible = > "atmel,at91sam9x5-clk-master"; > + #clock-cells = <0>; > + interrupt-parent = <&pmc>; > + interrupts = <AT91_PMC_MCKRDY>; > + clocks = <&clk32k>, <&main>, > <&plladiv>, <&utmi>; > + atmel,clk-output-range = <124000000 > 166000000>; > + atmel,clk-divisors = <1 2 4 3>; > + }; > + > + h32ck: h32mxck { > + #clock-cells = <0>; > + compatible = "atmel,sama5d4-clk-h32mx"; > + clocks = <&mck>; > + }; > + > + usb: usbck { > + compatible = "atmel,at91sam9x5-clk-usb"; > + #clock-cells = <0>; > + clocks = <&plladiv>, <&utmi>; > + }; > + > + prog: progck { > + compatible = > "atmel,at91sam9x5-clk-programmable"; > + #address-cells = <1>; > + #size-cells = <0>; > + interrupt-parent = <&pmc>; > + clocks = <&clk32k>, <&main>, > <&plladiv>, <&utmi>, <&mck>; > + > + prog0: prog0 { > + #clock-cells = <0>; > + reg = <0>; > + interrupts = > <AT91_PMC_PCKRDY(0)>; > + }; > + > + prog1: prog1 { > + #clock-cells = <0>; > + reg = <1>; > + interrupts = > <AT91_PMC_PCKRDY(1)>; > + }; > + > + prog2: prog2 { > + #clock-cells = <0>; > + reg = <2>; > + interrupts = > <AT91_PMC_PCKRDY(2)>; > + }; > + }; > + > + systemck { > + compatible = > "atmel,at91rm9200-clk-system"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + ddrck: ddrck { > + #clock-cells = <0>; > + reg = <2>; > + clocks = <&mck>; > + }; > + > + lcdck: lcdck { > + #clock-cells = <0>; > + reg = <3>; > + clocks = <&mck>; > + }; > + > + uhpck: uhpck { > + #clock-cells = <0>; > + reg = <6>; > + clocks = <&usb>; > + }; > + > + udpck: udpck { > + #clock-cells = <0>; > + reg = <7>; > + clocks = <&usb>; > + }; > + > + pck0: pck0 { > + #clock-cells = <0>; > + reg = <8>; > + clocks = <&prog0>; > + }; > + > + pck1: pck1 { > + #clock-cells = <0>; > + reg = <9>; > + clocks = <&prog1>; > + }; > + > + pck2: pck2 { > + #clock-cells = <0>; > + reg = <10>; > + clocks = <&prog2>; > + }; > + > + iscck: iscck { > + #clock-cells = <0>; > + reg = <18>; > + clocks = <&mck>; > + }; > + }; > + > + periph32ck { > + compatible = > "atmel,at91sam9x5-clk-peripheral"; > + #address-cells = <1>; > + #size-cells = <0>; > + clocks = <&h32ck>; > + > + macb0_clk: macb0_clk { > + #clock-cells = <0>; > + reg = <5>; > + atmel,clk-output-range = <0 > 83000000>; > + }; > + > + tdes_clk: tdes_clk { > + #clock-cells = <0>; > + reg = <11>; > + atmel,clk-output-range = <0 > 83000000>; > + }; > + > + matrix1_clk: matrix1_clk { > + #clock-cells = <0>; > + reg = <14>; > + }; > + > + hsmc_clk: hsmc_clk { > + #clock-cells = <0>; > + reg = <17>; > + }; > + > + pioA_clk: pioA_clk { > + #clock-cells = <0>; > + reg = <18>; > + atmel,clk-output-range = <0 > 83000000>; > + }; > + > + flx0_clk: flx0_clk { > + #clock-cells = <0>; > + reg = <19>; > + atmel,clk-output-range = <0 > 83000000>; > + }; > + > + flx1_clk: flx1_clk { > + #clock-cells = <0>; > + reg = <20>; > + atmel,clk-output-range = <0 > 83000000>; > + }; > + > + flx2_clk: flx2_clk { > + #clock-cells = <0>; > + reg = <21>; > + atmel,clk-output-range = <0 > 83000000>; > + }; > + > + flx3_clk: flx3_clk { > + #clock-cells = <0>; > + reg = <22>; > + atmel,clk-output-range = <0 > 83000000>; > + }; > + > + flx4_clk: flx4_clk { > + #clock-cells = <0>; > + reg = <23>; > + atmel,clk-output-range = <0 > 83000000>; > + }; > + > + uart0_clk: uart0_clk { > + #clock-cells = <0>; > + reg = <24>; > + atmel,clk-output-range = <0 > 83000000>; > + }; > + > + uart1_clk: uart1_clk { > + #clock-cells = <0>; > + reg = <25>; > + atmel,clk-output-range = <0 > 83000000>; > + }; > + > + uart2_clk: uart2_clk { > + #clock-cells = <0>; > + reg = <26>; > + atmel,clk-output-range = <0 > 83000000>; > + }; > + > + uart3_clk: uart3_clk { > + #clock-cells = <0>; > + reg = <27>; > + atmel,clk-output-range = <0 > 83000000>; > + }; > + > + uart4_clk: uart4_clk { > + #clock-cells = <0>; > + reg = <28>; > + atmel,clk-output-range = <0 > 83000000>; > + }; > + > + twi0_clk: twi0_clk { > + reg = <29>; > + #clock-cells = <0>; > + atmel,clk-output-range = <0 > 83000000>; > + }; > + > + twi1_clk: twi1_clk { > + #clock-cells = <0>; > + reg = <30>; > + atmel,clk-output-range = <0 > 83000000>; > + }; > + > + spi0_clk: spi0_clk { > + #clock-cells = <0>; > + reg = <33>; > + atmel,clk-output-range = <0 > 83000000>; > + }; > + > + spi1_clk: spi1_clk { > + #clock-cells = <0>; > + reg = <34>; > + atmel,clk-output-range = <0 > 83000000>; > + }; > + > + tcb0_clk: tcb0_clk { > + #clock-cells = <0>; > + reg = <35>; > + atmel,clk-output-range = <0 > 83000000>; > + }; > + > + tcb1_clk: tcb1_clk { > + #clock-cells = <0>; > + reg = <36>; > + atmel,clk-output-range = <0 > 83000000>; > + }; > + > + pwm_clk: pwm_clk { > + #clock-cells = <0>; > + reg = <38>; > + atmel,clk-output-range = <0 > 83000000>; > + }; > + > + adc_clk: adc_clk { > + #clock-cells = <0>; > + reg = <40>; > + atmel,clk-output-range = <0 > 83000000>; > + }; > + > + uhphs_clk: uhphs_clk { > + #clock-cells = <0>; > + reg = <41>; > + atmel,clk-output-range = <0 > 83000000>; > + }; > + > + udphs_clk: udphs_clk { > + #clock-cells = <0>; > + reg = <42>; > + atmel,clk-output-range = <0 > 83000000>; > + }; > + > + ssc0_clk: ssc0_clk { > + #clock-cells = <0>; > + reg = <43>; > + atmel,clk-output-range = <0 > 83000000>; > + }; > + > + ssc1_clk: ssc1_clk { > + #clock-cells = <0>; > + reg = <44>; > + atmel,clk-output-range = <0 > 83000000>; > + }; > + > + trng_clk: trng_clk { > + #clock-cells = <0>; > + reg = <47>; > + atmel,clk-output-range = <0 > 83000000>; > + }; > + > + classd_clk: classd_clk { > + #clock-cells = <0>; > + reg = <59>; > + atmel,clk-output-range = <0 > 83000000>; > + }; > + }; > + > + periph64ck { > + compatible = > "atmel,at91sam9x5-clk-peripheral"; > + #address-cells = <1>; > + #size-cells = <0>; > + clocks = <&mck>; > + > + dma0_clk: dma0_clk { > + #clock-cells = <0>; > + reg = <6>; > + }; > + > + dma1_clk: dma1_clk { > + #clock-cells = <0>; > + reg = <7>; > + }; > + > + aes_clk: aes_clk { > + #clock-cells = <0>; > + reg = <9>; > + }; > + > + aesb_clk: aesb_clk { > + #clock-cells = <0>; > + reg = <10>; > + }; > + > + sha_clk: sha_clk { > + #clock-cells = <0>; > + reg = <12>; > + }; > + > + mpddr_clk: mpddr_clk { > + #clock-cells = <0>; > + reg = <13>; > + }; > + > + matrix0_clk: matrix0_clk { > + #clock-cells = <0>; > + reg = <15>; > + }; > + > + sdmmc0_hclk: sdmmc0_hclk { > + #clock-cells = <0>; > + reg = <31>; > + }; > + > + sdmmc1_hclk: sdmmc1_hclk { > + #clock-cells = <0>; > + reg = <32>; > + }; > + > + lcdc_clk: lcdc_clk { > + #clock-cells = <0>; > + reg = <45>; > + }; > + > + isc_clk: isc_clk { > + #clock-cells = <0>; > + reg = <46>; > + }; > + > + qspi0_clk: qspi0_clk { > + #clock-cells = <0>; > + reg = <52>; > + }; > + > + qspi1_clk: qspi1_clk { > + #clock-cells = <0>; > + reg = <53>; > + }; > + }; > + }; > + > + sha@f0028000 { > + compatible = "atmel,at91sam9g46-sha"; > + reg = <0xf0028000 0x100>; > + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>; > + dmas = <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(30))>; > + dma-names = "tx"; > + clocks = <&sha_clk>; > + clock-names = "sha_clk"; > + status = "disabled"; > + }; > + > + aes@f002c000 { > + compatible = "atmel,at91sam9g46-aes"; > + reg = <0xf002c000 0x100>; > + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>; > + dmas = <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(26))>, > + <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(27))>; > + dma-names = "tx", "rx"; > + clocks = <&aes_clk>; > + clock-names = "aes_clk"; > + status = "disabled"; > + }; > + > + spi0: spi@f8000000 { > + compatible = "atmel,at91rm9200-spi"; > + reg = <0xf8000000 0x100>; > + interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>; > + dmas = <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(6))>, > + <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(7))>; > + dma-names = "tx", "rx"; > + clocks = <&spi0_clk>; > + clock-names = "spi_clk"; > + atmel,fifo-size = <16>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + macb0: ethernet@f8008000 { > + compatible = "atmel,sama5d2-gem"; > + reg = <0xf8008000 0x1000>; > + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 3 > /* Queue 0 */ > + 66 IRQ_TYPE_LEVEL_HIGH 3 > /* Queue 1 */ > + 67 IRQ_TYPE_LEVEL_HIGH 3>; > /* Queue 2 */ > + #address-cells = <1>; > + #size-cells = <0>; > + clocks = <&macb0_clk>, <&macb0_clk>; > + clock-names = "hclk", "pclk"; > + status = "disabled"; > + }; > + > + tcb0: timer@f800c000 { > + compatible = "atmel,at91sam9x5-tcb"; > + reg = <0xf800c000 0x100>; > + interrupts = <35 IRQ_TYPE_LEVEL_HIGH 0>; > + clocks = <&tcb0_clk>; > + clock-names = "t0_clk"; > + }; > + > + tcb1: timer@f8010000 { > + compatible = "atmel,at91sam9x5-tcb"; > + reg = <0xf8010000 0x100>; > + interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>; > + clocks = <&tcb1_clk>; > + clock-names = "t0_clk"; > + }; > + > + uart0: serial@f801c000 { > + compatible = "atmel,at91sam9260-usart"; > + reg = <0xf801c000 0x100>; > + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 7>; > + clocks = <&uart0_clk>; > + clock-names = "usart"; > + status = "disabled"; > + }; > + > + uart1: serial@f8020000 { > + compatible = "atmel,at91sam9260-usart"; > + reg = <0xf8020000 0x100>; > + interrupts = <25 IRQ_TYPE_LEVEL_HIGH 7>; > + clocks = <&uart1_clk>; > + clock-names = "usart"; > + status = "disabled"; > + }; > + > + uart2: serial@f8024000 { > + compatible = "atmel,at91sam9260-usart"; > + reg = <0xf8024000 0x100>; > + interrupts = <26 IRQ_TYPE_LEVEL_HIGH 7>; > + clocks = <&uart2_clk>; > + clock-names = "usart"; > + status = "disabled"; > + }; > + > + i2c0: i2c@f8028000 { > + compatible = "atmel,sama5d2-i2c"; > + reg = <0xf8028000 0x100>; > + interrupts = <29 IRQ_TYPE_LEVEL_HIGH 7>; > + dmas = <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(0))>, > + <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(1))>; > + dma-names = "tx", "rx"; > + #address-cells = <1>; > + #size-cells = <0>; > + clocks = <&twi0_clk>; > + status = "disabled"; > + }; > + > + pit: timer@f8048030 { > + compatible = "atmel,at91sam9260-pit"; > + reg = <0xf8048030 0x10>; > + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>; > + clocks = <&h32ck>; > + }; > + > + sckc@f8048050 { > + compatible = "atmel,at91sam9x5-sckc"; > + reg = <0xf8048050 0x4>; > + > + slow_rc_osc: slow_rc_osc { > + compatible = > "atmel,at91sam9x5-clk-slow-rc-osc"; > + #clock-cells = <0>; > + clock-frequency = <32768>; > + clock-accuracy = <250000000>; > + atmel,startup-time-usec = <75>; > + }; > + > + slow_osc: slow_osc { > + compatible = > "atmel,at91sam9x5-clk-slow-osc"; > + #clock-cells = <0>; > + clocks = <&slow_xtal>; > + atmel,startup-time-usec = <1200000>; > + }; > + > + clk32k: slowck { > + compatible = > "atmel,at91sam9x5-clk-slow"; > + #clock-cells = <0>; > + clocks = <&slow_rc_osc &slow_osc>; > + }; > + }; > + > + rtc@f80480b0 { > + compatible = "atmel,at91rm9200-rtc"; > + reg = <0xf80480b0 0x30>; > + interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>; > + }; > + > + spi1: spi@fc000000 { > + compatible = "atmel,at91rm9200-spi"; > + reg = <0xfc000000 0x100>; > + interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>; > + dmas = <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(8))>, > + <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(9))>; > + dma-names = "tx", "rx"; > + clocks = <&spi1_clk>; > + clock-names = "spi_clk"; > + atmel,fifo-size = <16>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "disabled"; > + }; > + > + uart3: serial@fc008000 { > + compatible = "atmel,at91sam9260-usart"; > + reg = <0xfc008000 0x100>; > + interrupts = <27 IRQ_TYPE_LEVEL_HIGH 7>; > + clocks = <&uart3_clk>; > + clock-names = "usart"; > + status = "disabled"; > + }; > + > + uart4: serial@fc00c000 { > + compatible = "atmel,at91sam9260-usart"; > + reg = <0xfc00c000 0x100>; > + interrupts = <28 IRQ_TYPE_LEVEL_HIGH 7>; > + clocks = <&uart4_clk>; > + clock-names = "usart"; > + status = "disabled"; > + }; > + > + aic: interrupt-controller@fc020000 { > + #interrupt-cells = <3>; > + compatible = "atmel,sama5d2-aic"; > + interrupt-controller; > + reg = <0xfc020000 0x200>; > + atmel,external-irqs = <49>; > + }; > + > + i2c1: i2c@fc028000 { > + compatible = "atmel,sama5d2-i2c"; > + reg = <0xfc028000 0x100>; > + interrupts = <30 IRQ_TYPE_LEVEL_HIGH 7>; > + dmas = <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(2))>, > + <&dma0 > + (AT91_XDMAC_DT_MEM_IF(0) | > AT91_XDMAC_DT_PER_IF(1) | > + AT91_XDMAC_DT_PERID(3))>; > + dma-names = "tx", "rx"; > + #address-cells = <1>; > + #size-cells = <0>; > + clocks = <&twi1_clk>; > + status = "disabled"; > + }; > + }; > + }; > +}; > -- Nicolas Ferre -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
