Hi,
It was discovered that all the slow clock user were not properly claiming it.
This can end up in a system hang because the last registered user is releasing
it, and it gets disabled.
commit dca1a4b5ff6e ("clk: at91: keep slow clk enabled to prevent system hang")
was a workaround. This series is adding the slow clock to the necessary drivers
to avoid the issue and then removes that workaround.
The Documentation updates and DT patches should probably go through the AT91
tree this cycle to avoid breakage.
Then the other patches can go through each subsystem tree. They are trivial
enough to also go in this cycle.
The final clk patch depends on the other ones and may be taken for the next
cycle to avoid synchronization issues.
I've thrown in a cleanup for at91-reset as it avoids adding support for that
clock to the platform data initialization
Changes in v2:
- statisticize the global in the atmel-st change
- merge at91_reset_of_probe() in at91_reset_probe()
- added patches from Boris for the TCB
- added the slow clock to the TCB
Cc: Alessandro Zummo <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Daniel Lezcano <[email protected]>
Cc: Dmitry Eremin-Solenikov <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: Michael Turquette <[email protected]>
Cc: [email protected]
Cc: Sebastian Reichel <[email protected]>
Cc: Stephen Boyd <[email protected]>
Cc: Thierry Reding <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Wim Van Sebroeck <[email protected]>
Alexandre Belloni (20):
Documentation: dt: atmel-at91: add clocks to system timer, rstc and
shdwc
Documentation: watchdog: at91sam9_wdt: add clocks property
Documentation: dt: rtc: at91rm9200: add clocks property
ARM: at91/dt: at91rm9200: use slow clock where necessary
ARM: at91/dt: at91sam9260: use slow clock where necessary
ARM: at91/dt: at91sam9261: use slow clock where necessary
ARM: at91/dt: at91sam9263: use slow clock where necessary
ARM: at91/dt: at91sam9g45: use slow clock where necessary
ARM: at91/dt: at91sam9n12: use slow clock where necessary
ARM: at91/dt: at91sam9rl: use slow clock where necessary
ARM: at91/dt: at91sam9x5: use slow clock where necessary
ARM: at91/dt: sama5d3: use slow clock where necessary
ARM: at91/dt: sama5d4: use slow clock where necessary
rtc: at91rm9200: get and use slow clock
watchdog: at91sam9: get and use slow clock
power/reset: at91-reset: remove useless at91_reset_platform_probe()
power/reset: at91-reset: get and use slow clock
power/reset: at91-poweroff: get and use slow clock
clocksource: atmel-st: get and use slow clock
clk: at91: Revert "keep slow clk enabled to prevent system hang"
Boris Brezillon (3):
Documentation: dt: atmel-at91: add slow clock to tcb
clocksource: tcb_clksrc: fix setup_clkevents error path
misc: atmel_tclib: get and use slow clock
.../devicetree/bindings/arm/atmel-at91.txt | 13 +++--
.../bindings/rtc/atmel,at91rm9200-rtc.txt | 2 +
.../devicetree/bindings/watchdog/atmel-wdt.txt | 2 +
arch/arm/boot/dts/at91rm9200.dtsi | 10 ++--
arch/arm/boot/dts/at91sam9260.dtsi | 11 +++--
arch/arm/boot/dts/at91sam9261.dtsi | 7 ++-
arch/arm/boot/dts/at91sam9263.dtsi | 7 ++-
arch/arm/boot/dts/at91sam9g45.dtsi | 12 +++--
arch/arm/boot/dts/at91sam9n12.dtsi | 12 +++--
arch/arm/boot/dts/at91sam9rl.dtsi | 8 ++-
arch/arm/boot/dts/at91sam9x5.dtsi | 12 +++--
arch/arm/boot/dts/sama5d3.dtsi | 8 ++-
arch/arm/boot/dts/sama5d3_tcb1.dtsi | 4 +-
arch/arm/boot/dts/sama5d4.dtsi | 12 +++--
drivers/clk/at91/clk-slow.c | 27 ----------
drivers/clocksource/tcb_clksrc.c | 10 +++-
drivers/clocksource/timer-atmel-st.c | 31 ++++++++----
drivers/misc/atmel_tclib.c | 4 ++
drivers/power/reset/at91-poweroff.c | 13 +++++
drivers/power/reset/at91-reset.c | 57 ++++++----------------
drivers/pwm/pwm-atmel-tcb.c | 23 ++++++---
drivers/rtc/rtc-at91rm9200.c | 27 ++++++++--
drivers/watchdog/at91sam9_wdt.c | 22 ++++++++-
include/linux/atmel_tc.h | 1 +
24 files changed, 206 insertions(+), 129 deletions(-)
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
