On Tuesday 21 July 2015 06:11 PM, Vaibhav Hiremath wrote:
With addition of PXA910 family of devices, the TWSI module supports SCL clock adjustment using ILCR register. This patch enables the control and configuration of ICLR through DT properties, i2c-sclk-high-time-ns: SCLK high time (tHigh), for standard/fast/high speed mode i2c-sclk-low-time-ns: SCLK low time (tLow), for standard/fast/high speed mode Note that in case of standard and fast mod, the tLow and tHigh counters are same, and software will use tLow value. Also, brought up devm_clk_get() fn above i2c_pxa_probe_dt(), as it uses clk rate for timing calculations. Signed-off-by: Vaibhav Hiremath <[email protected]> Signed-off-by: Jett.Zhou <[email protected]> Signed-off-by: Yi Zhang <[email protected]> --- drivers/i2c/busses/i2c-pxa.c | 69 ++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 63 insertions(+), 6 deletions(-)
Robert, It would be helpful if you can test this patch-series and confirm that it now fixes the NULL pointer deference issue. Thanks, Vaibhav -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
