Everytime a DMA channel register is accessed, the channel base address is calculated by adding the DMA base address and the channel register offset. Avoid this calculation and simply calculate the channel base address once at probe time for each DMA channel.
Signed-off-by: Jon Hunter <[email protected]> --- drivers/dma/tegra20-apb-dma.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/dma/tegra20-apb-dma.c b/drivers/dma/tegra20-apb-dma.c index cf8cff7827f0..11edcca7619b 100644 --- a/drivers/dma/tegra20-apb-dma.c +++ b/drivers/dma/tegra20-apb-dma.c @@ -187,7 +187,7 @@ struct tegra_dma_channel { bool config_init; int id; int irq; - unsigned long chan_base_offset; + void __iomem *chan_addr; spinlock_t lock; bool busy; struct tegra_dma *tdma; @@ -239,12 +239,12 @@ static inline u32 tdma_read(struct tegra_dma *tdma, u32 reg) static inline void tdc_write(struct tegra_dma_channel *tdc, u32 reg, u32 val) { - writel(val, tdc->tdma->base_addr + tdc->chan_base_offset + reg); + writel(val, tdc->chan_addr + reg); } static inline u32 tdc_read(struct tegra_dma_channel *tdc, u32 reg) { - return readl(tdc->tdma->base_addr + tdc->chan_base_offset + reg); + return readl(tdc->chan_addr + reg); } static inline struct tegra_dma_channel *to_tegra_dma_chan(struct dma_chan *dc) @@ -1373,8 +1373,9 @@ static int tegra_dma_probe(struct platform_device *pdev) for (i = 0; i < cdata->nr_channels; i++) { struct tegra_dma_channel *tdc = &tdma->channels[i]; - tdc->chan_base_offset = TEGRA_APBDMA_CHANNEL_BASE_ADD_OFFSET + - i * cdata->channel_reg_size; + tdc->chan_addr = tdma->base_addr + + TEGRA_APBDMA_CHANNEL_BASE_ADD_OFFSET + + (i * cdata->channel_reg_size); res = platform_get_resource(pdev, IORESOURCE_IRQ, i); if (!res) { -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
